[PATCH V2 3/4] ARM: dts: imx6ul: Add GPMI nand controller support

Michael Trimarchi michael at amarulasolutions.com
Tue Mar 22 00:44:48 PDT 2016


Hi

On Mon, Mar 21, 2016 at 10:47 AM, Lothar Waßmann <LW at karo-electronics.de> wrote:
> Hi,
>
> On Sun, 20 Mar 2016 09:44:19 +0100 Michael Trimarchi wrote:
>> Hi Lothar
>>
>> On Mon, Feb 22, 2016 at 9:26 AM, Lothar Waßmann <LW at karo-electronics.de> wrote:
>> > Hi,
>> >
>> > On Sun, 21 Feb 2016 12:29:53 +0100 Michael Trimarchi wrote:
>> >> Add support for GPMI nand controller.
>> >>
>> >> Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
>> >> ---
>> >> Changes V2:
>> >>       - drop special IMXUL type because seems that is compatible
>> >>         with IMX6Q
>> >>
>> >>  arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++
>> >>  1 file changed, 33 insertions(+)
>> >>
>> >> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
>> >> index f4daf97..1a486ac 100644
>> >> --- a/arch/arm/boot/dts/imx6ul.dtsi
>> >> +++ b/arch/arm/boot/dts/imx6ul.dtsi
>> >> @@ -142,6 +142,39 @@
>> >>                       reg = <0x00900000 0x20000>;
>> >>               };
>> >>
>> >> +             dma_apbh: dma-apbh at 01804000 {
>> >> +                     compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh";
>> >> +                     reg = <0x01804000 0x2000>;
>> >> +                     interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
>> >> +                                  <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
>> >> +                                  <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
>> >> +                                  <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> >> +                     interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
>> >> +                     #dma-cells = <1>;
>> >> +                     dma-channels = <4>;
>> >> +                     clocks = <&clks IMX6UL_CLK_APBHDMA>;
>> >> +             };
>> >> +
>> >> +             gpmi: gpmi-nand at 01806000 {
>> >> +                     compatible = "fsl,imx6q-gpmi-nand";
>> >>
>> > You should still add an imx6ul specific compatible (likewise to the
>> > dma_apbh).
>> >
>>
>> I understand your point but this seems that imx6q and imx6sx are
>> defined in the same way
>>
> That doesn't mean they are correct. I got the same comment from Lucas
> Stach in <1452678036.3694.51.camel at pengutronix.de>
>

Ok, it's fine. I will fix it and re-post the series

Michael

>
> Lothar Waßmann



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |



More information about the linux-arm-kernel mailing list