[PATCH V2 3/4] ARM: dts: imx6ul: Add GPMI nand controller support
Michael Trimarchi
michael at amarulasolutions.com
Sun Mar 20 01:44:19 PDT 2016
Hi Lothar
On Mon, Feb 22, 2016 at 9:26 AM, Lothar Waßmann <LW at karo-electronics.de> wrote:
> Hi,
>
> On Sun, 21 Feb 2016 12:29:53 +0100 Michael Trimarchi wrote:
>> Add support for GPMI nand controller.
>>
>> Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
>> ---
>> Changes V2:
>> - drop special IMXUL type because seems that is compatible
>> with IMX6Q
>>
>> arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++
>> 1 file changed, 33 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
>> index f4daf97..1a486ac 100644
>> --- a/arch/arm/boot/dts/imx6ul.dtsi
>> +++ b/arch/arm/boot/dts/imx6ul.dtsi
>> @@ -142,6 +142,39 @@
>> reg = <0x00900000 0x20000>;
>> };
>>
>> + dma_apbh: dma-apbh at 01804000 {
>> + compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh";
>> + reg = <0x01804000 0x2000>;
>> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
>> + #dma-cells = <1>;
>> + dma-channels = <4>;
>> + clocks = <&clks IMX6UL_CLK_APBHDMA>;
>> + };
>> +
>> + gpmi: gpmi-nand at 01806000 {
>> + compatible = "fsl,imx6q-gpmi-nand";
>>
> You should still add an imx6ul specific compatible (likewise to the
> dma_apbh).
>
I understand your point but this seems that imx6q and imx6sx are
defined in the same way
Michael
>
>
> Lothar Waßmann
--
| Michael Nazzareno Trimarchi Amarula Solutions BV |
| COO - Founder Cruquiuskade 47 |
| +31(0)851119172 Amsterdam 1018 AM NL |
| [`as] http://www.amarulasolutions.com |
More information about the linux-arm-kernel
mailing list