[PATCH 2/4] arm64: dts: hip06: Append hns node
Kefeng Wang
wangkefeng.wang at huawei.com
Tue Jun 28 20:29:07 PDT 2016
On 2016/6/29 1:09, Wei Xu wrote:
> Hi Kefeng,
>
> On 28/06/2016 06:51, Kefeng Wang wrote:
>> There are four ports(2 GE, 2 XGE) in D03 board, append
>> relevant nodes for them.
>>
>> Cc: Kejian Yan <yankejian at huawei.com>
>> Cc: Yisen Zhuang <yisen.zhuang at huawei.com>
>> Signed-off-by: Kefeng Wang <wangkefeng.wang at huawei.com>
>> ---
>> arch/arm64/boot/dts/hisilicon/hip06-d03.dts | 16 +++
>> arch/arm64/boot/dts/hisilicon/hip06.dtsi | 215 ++++++++++++++++++++++++++++
>> 2 files changed, 231 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
>> index f3e5323..5562cf4 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
>> +++ b/arch/arm64/boot/dts/hisilicon/hip06-d03.dts
>> @@ -25,6 +25,22 @@
>> chosen { };
>> };
>>
>> +ð0 {
>> + status = "ok";
>> +};
>> +
>> +ð1 {
>> + status = "ok";
>> +};
>> +
>> +ð2 {
>> + status = "ok";
>> +};
>> +
>> +ð3 {
>> + status = "ok";
>> +};
>> +
>> &usb_ohci {
>> status = "ok";
>> };
>> diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
>> index 5927bc4..3eca430 100644
>> --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
>> +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
>> @@ -279,6 +279,18 @@
>> };
>> };
>>
>> + mbigen_dsa at c0080000 {
>> + compatible = "hisilicon,mbigen-v2";
>> + reg = <0x0 0xc0080000 0x0 0x10000>;
>> +
>> + mbigen_dsaf0: intc_dsaf0 {
>> + msi-parent = <&its_dsa 0x40800>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + num-pins = <409>;
>> + };
>> + };
>> +
>> soc {
>> compatible = "simple-bus";
>> #address-cells = <2>;
>> @@ -302,6 +314,209 @@
>> dma-coherent;
>> status = "disabled";
>> };
>> +
>> + peri_c_subctrl: sub_ctrl_c at 60000000 {
>> + compatible = "hisilicon,peri-c-subctrl","syscon";
>> + reg = <0 0x60000000 0x0 0x10000>;
>> + };
>> +
>> + dsaf_subctrl: dsaf_subctrl at c0000000 {
>> + compatible = "hisilicon,dsaf-ctrl", "syscon";
>> + reg = <0x0 0xc0000000 0x0 0x10000>;
>> + };
>> +
>> + serdes_ctrl: sds_ctrl at c2200000 {
>> + compatible = "hisilicon,serdes-syscon","syscon";
>> + reg = <0 0xc2200000 0x0 0x80000>;
>> + };
>
> I found peri-c-subctrl, dsaf-ctrl and serdes-syscon are not documented
> in the device tree binding documents.
> I checked the net-next tree and also did not find it.
> Could you check it as well?
OK, fix in v2, thanks.
> Thanks!
> The others is fine to me.
>
> Best Regards,
> Wei Xu
>
>> +
>> + mdio at 603c0000 {
>> + compatible = "hisilicon,hns-mdio";
>> + reg = <0x0 0x603c0000 0x0 0x1000>;
>> + subctrl-vbase = <&peri_c_subctrl>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + phy0: ethernet-phy at 0 {
>> + compatible = "ethernet-phy-ieee802.3-c22";
>> + reg = <0>;
>> + };
>> +
>> + phy1: ethernet-phy at 1 {
>> + compatible = "ethernet-phy-ieee802.3-c22";
>> + reg = <1>;
>> + };
>> + };
>> +
>> + dsaf0: dsa at c7000000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "hisilicon,hns-dsaf-v2";
>> + mode = "6port-16rss";
>> + reg = <0x0 0xc5000000 0x0 0x890000
>> + 0x0 0xc7000000 0x0 0x600000>;
>> + reg-names = "ppe-base", "dsaf-base";
>> + interrupt-parent = <&mbigen_dsaf0>;
>> + subctrl-syscon = <&dsaf_subctrl>;
>> + reset-field-offset = <0>;
>> + interrupts =
>> + <576 1>, <577 1>, <578 1>, <579 1>, <580 1>,
>> + <581 1>, <582 1>, <583 1>, <584 1>, <585 1>,
>> + <586 1>, <587 1>, <588 1>, <589 1>, <590 1>,
>> + <591 1>, <592 1>, <593 1>, <594 1>, <595 1>,
>> + <596 1>, <597 1>, <598 1>, <599 1>, <600 1>,
>> + <960 1>, <961 1>, <962 1>, <963 1>, <964 1>,
>> + <965 1>, <966 1>, <967 1>, <968 1>, <969 1>,
>> + <970 1>, <971 1>, <972 1>, <973 1>, <974 1>,
>> + <975 1>, <976 1>, <977 1>, <978 1>, <979 1>,
>> + <980 1>, <981 1>, <982 1>, <983 1>, <984 1>,
>> + <985 1>, <986 1>, <987 1>, <988 1>, <989 1>,
>> + <990 1>, <991 1>, <992 1>, <993 1>, <994 1>,
>> + <995 1>, <996 1>, <997 1>, <998 1>, <999 1>,
>> + <1000 1>, <1001 1>, <1002 1>, <1003 1>, <1004 1>,
>> + <1005 1>, <1006 1>, <1007 1>, <1008 1>, <1009 1>,
>> + <1010 1>, <1011 1>, <1012 1>, <1013 1>, <1014 1>,
>> + <1015 1>, <1016 1>, <1017 1>, <1018 1>, <1019 1>,
>> + <1020 1>, <1021 1>, <1022 1>, <1023 1>, <1024 1>,
>> + <1025 1>, <1026 1>, <1027 1>, <1028 1>, <1029 1>,
>> + <1030 1>, <1031 1>, <1032 1>, <1033 1>, <1034 1>,
>> + <1035 1>, <1036 1>, <1037 1>, <1038 1>, <1039 1>,
>> + <1040 1>, <1041 1>, <1042 1>, <1043 1>, <1044 1>,
>> + <1045 1>, <1046 1>, <1047 1>, <1048 1>, <1049 1>,
>> + <1050 1>, <1051 1>, <1052 1>, <1053 1>, <1054 1>,
>> + <1055 1>, <1056 1>, <1057 1>, <1058 1>, <1059 1>,
>> + <1060 1>, <1061 1>, <1062 1>, <1063 1>, <1064 1>,
>> + <1065 1>, <1066 1>, <1067 1>, <1068 1>, <1069 1>,
>> + <1070 1>, <1071 1>, <1072 1>, <1073 1>, <1074 1>,
>> + <1075 1>, <1076 1>, <1077 1>, <1078 1>, <1079 1>,
>> + <1080 1>, <1081 1>, <1082 1>, <1083 1>, <1084 1>,
>> + <1085 1>, <1086 1>, <1087 1>, <1088 1>, <1089 1>,
>> + <1090 1>, <1091 1>, <1092 1>, <1093 1>, <1094 1>,
>> + <1095 1>, <1096 1>, <1097 1>, <1098 1>, <1099 1>,
>> + <1100 1>, <1101 1>, <1102 1>, <1103 1>, <1104 1>,
>> + <1105 1>, <1106 1>, <1107 1>, <1108 1>, <1109 1>,
>> + <1110 1>, <1111 1>, <1112 1>, <1113 1>, <1114 1>,
>> + <1115 1>, <1116 1>, <1117 1>, <1118 1>, <1119 1>,
>> + <1120 1>, <1121 1>, <1122 1>, <1123 1>, <1124 1>,
>> + <1125 1>, <1126 1>, <1127 1>, <1128 1>, <1129 1>,
>> + <1130 1>, <1131 1>, <1132 1>, <1133 1>, <1134 1>,
>> + <1135 1>, <1136 1>, <1137 1>, <1138 1>, <1139 1>,
>> + <1140 1>, <1141 1>, <1142 1>, <1143 1>, <1144 1>,
>> + <1145 1>, <1146 1>, <1147 1>, <1148 1>, <1149 1>,
>> + <1150 1>, <1151 1>, <1152 1>, <1153 1>, <1154 1>,
>> + <1155 1>, <1156 1>, <1157 1>, <1158 1>, <1159 1>,
>> + <1160 1>, <1161 1>, <1162 1>, <1163 1>, <1164 1>,
>> + <1165 1>, <1166 1>, <1167 1>, <1168 1>, <1169 1>,
>> + <1170 1>, <1171 1>, <1172 1>, <1173 1>, <1174 1>,
>> + <1175 1>, <1176 1>, <1177 1>, <1178 1>, <1179 1>,
>> + <1180 1>, <1181 1>, <1182 1>, <1183 1>, <1184 1>,
>> + <1185 1>, <1186 1>, <1187 1>, <1188 1>, <1189 1>,
>> + <1190 1>, <1191 1>, <1192 1>, <1193 1>, <1194 1>,
>> + <1195 1>, <1196 1>, <1197 1>, <1198 1>, <1199 1>,
>> + <1200 1>, <1201 1>, <1202 1>, <1203 1>, <1204 1>,
>> + <1205 1>, <1206 1>, <1207 1>, <1208 1>, <1209 1>,
>> + <1210 1>, <1211 1>, <1212 1>, <1213 1>, <1214 1>,
>> + <1215 1>, <1216 1>, <1217 1>, <1218 1>, <1219 1>,
>> + <1220 1>, <1221 1>, <1222 1>, <1223 1>, <1224 1>,
>> + <1225 1>, <1226 1>, <1227 1>, <1228 1>, <1229 1>,
>> + <1230 1>, <1231 1>, <1232 1>, <1233 1>, <1234 1>,
>> + <1235 1>, <1236 1>, <1237 1>, <1238 1>, <1239 1>,
>> + <1240 1>, <1241 1>, <1242 1>, <1243 1>, <1244 1>,
>> + <1245 1>, <1246 1>, <1247 1>, <1248 1>, <1249 1>,
>> + <1250 1>, <1251 1>, <1252 1>, <1253 1>, <1254 1>,
>> + <1255 1>, <1256 1>, <1257 1>, <1258 1>, <1259 1>,
>> + <1260 1>, <1261 1>, <1262 1>, <1263 1>, <1264 1>,
>> + <1265 1>, <1266 1>, <1267 1>, <1268 1>, <1269 1>,
>> + <1270 1>, <1271 1>, <1272 1>, <1273 1>, <1274 1>,
>> + <1275 1>, <1276 1>, <1277 1>, <1278 1>, <1279 1>,
>> + <1280 1>, <1281 1>, <1282 1>, <1283 1>, <1284 1>,
>> + <1285 1>, <1286 1>, <1287 1>, <1288 1>, <1289 1>,
>> + <1290 1>, <1291 1>, <1292 1>, <1293 1>, <1294 1>,
>> + <1295 1>, <1296 1>, <1297 1>, <1298 1>, <1299 1>,
>> + <1300 1>, <1301 1>, <1302 1>, <1303 1>, <1304 1>,
>> + <1305 1>, <1306 1>, <1307 1>, <1308 1>, <1309 1>,
>> + <1310 1>, <1311 1>, <1312 1>, <1313 1>, <1314 1>,
>> + <1315 1>, <1316 1>, <1317 1>, <1318 1>, <1319 1>,
>> + <1320 1>, <1321 1>, <1322 1>, <1323 1>, <1324 1>,
>> + <1325 1>, <1326 1>, <1327 1>, <1328 1>, <1329 1>,
>> + <1330 1>, <1331 1>, <1332 1>, <1333 1>, <1334 1>,
>> + <1335 1>, <1336 1>, <1337 1>, <1338 1>, <1339 1>,
>> + <1340 1>, <1341 1>, <1342 1>, <1343 1>;
>> +
>> + desc-num = <0x400>;
>> + buf-size = <0x1000>;
>> + dma-coherent;
>> +
>> + port at 0 {
>> + reg = <0>;
>> + serdes-syscon = <&serdes_ctrl>;
>> + port-rst-offset = <0>;
>> + port-mode-offset = <0>;
>> + media-type = "fiber";
>> + };
>> +
>> + port at 1 {
>> + reg = <1>;
>> + serdes-syscon= <&serdes_ctrl>;
>> + port-rst-offset = <1>;
>> + port-mode-offset = <1>;
>> + media-type = "fiber";
>> + };
>> +
>> + port at 4 {
>> + reg = <4>;
>> + phy-handle = <&phy0>;
>> + serdes-syscon= <&serdes_ctrl>;
>> + port-rst-offset = <4>;
>> + port-mode-offset = <2>;
>> + media-type = "copper";
>> + };
>> +
>> + port at 5 {
>> + reg = <5>;
>> + phy-handle = <&phy1>;
>> + serdes-syscon= <&serdes_ctrl>;
>> + port-rst-offset = <5>;
>> + port-mode-offset = <3>;
>> + media-type = "copper";
>> + };
>> + };
>> +
>> + eth0: ethernet at 4{
>> + compatible = "hisilicon,hns-nic-v2";
>> + ae-handle = <&dsaf0>;
>> + port-idx-in-ae = <4>;
>> + local-mac-address = [00 00 00 00 00 00];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> +
>> + eth1: ethernet at 5{
>> + compatible = "hisilicon,hns-nic-v2";
>> + ae-handle = <&dsaf0>;
>> + port-idx-in-ae = <5>;
>> + local-mac-address = [00 00 00 00 00 00];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> +
>> + eth2: ethernet at 0{
>> + compatible = "hisilicon,hns-nic-v2";
>> + ae-handle = <&dsaf0>;
>> + port-idx-in-ae = <0>;
>> + local-mac-address = [00 00 00 00 00 00];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> +
>> + eth3: ethernet at 1{
>> + compatible = "hisilicon,hns-nic-v2";
>> + ae-handle = <&dsaf0>;
>> + port-idx-in-ae = <1>;
>> + local-mac-address = [00 00 00 00 00 00];
>> + status = "disabled";
>> + dma-coherent;
>> + };
>> };
>>
>> };
>>
>
>
> .
>
More information about the linux-arm-kernel
mailing list