[PATCH v2 4/5] mfd: rn5t618: register power off callback optionally
Stefan Agner
stefan at agner.ch
Sat Jun 18 18:08:54 PDT 2016
On 2016-06-16 07:59, Lee Jones wrote:
> On Tue, 07 Jun 2016, Stefan Agner wrote:
>
>> Only register power off if the PMIC is defined as system power
>> controller (see Documentation/devicetree/bindings/power/
>> power-controller.txt).
>>
>> Reviewed-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>> Signed-off-by: Stefan Agner <stefan at agner.ch>
>
> These should be chronological.
>
Has been discussed already here:
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-May/345835.html
It's an artifact of my development process, I keep the commits in my
local branches without signed off lines and add them before sending out
patches. So whenever I prepare a new revision, collected acks, sobs are
chronological, but end up before my sob.
But since you are the second maintainer which has objection to that
style I probably should change that...
>> ---
>> drivers/mfd/rn5t618.c | 10 +++++++---
>> 1 file changed, 7 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
>> index 7607ced..d9b4d40 100644
>> --- a/drivers/mfd/rn5t618.c
>> +++ b/drivers/mfd/rn5t618.c
>> @@ -103,9 +103,13 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
>> return ret;
>> }
>>
>> - if (!pm_power_off) {
>> - rn5t618_pm_power_off = priv;
>> - pm_power_off = rn5t618_power_off;
>> + if (of_device_is_system_power_controller(i2c->dev.of_node)) {
>> + if (!pm_power_off) {
>> + rn5t618_pm_power_off = priv;
>> + pm_power_off = rn5t618_power_off;
>> + } else {
>> + dev_err(&i2c->dev, "Failed to set poweroff capability, already defined\n");
>
> This is not an error. Please use dev_warn() instead.
>
Hm, I agree... FWIW, I copied the code (and that message) from here,
where dev_err is probably also not appropriate:
drivers/regulator/act8865-regulator.c
> Also, is this message actually accurate? Your commit message would
> indicate that it's not.
Hm, maybe we should bail out with an error in that case since DT
explicitly asks to be power controller... Is that what you mean?
--
Stefan
>
>> + }
>> }
>>
>> return 0;
More information about the linux-arm-kernel
mailing list