[PATCH v2 4/5] mfd: rn5t618: register power off callback optionally

[Lee Jones]

On Tue, 07 Jun 2016, Stefan Agner wrote:

> Only register power off if the PMIC is defined as system power
> controller (see Documentation/devicetree/bindings/power/
> power-controller.txt).
> 
> Reviewed-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> Signed-off-by: Stefan Agner <stefan at agner.ch>

These should be chronological.

> ---
>  drivers/mfd/rn5t618.c | 10 +++++++---
>  1 file changed, 7 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
> index 7607ced..d9b4d40 100644
> --- a/drivers/mfd/rn5t618.c
> +++ b/drivers/mfd/rn5t618.c
> @@ -103,9 +103,13 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
>  		return ret;
>  	}
>  
> -	if (!pm_power_off) {
> -		rn5t618_pm_power_off = priv;
> -		pm_power_off = rn5t618_power_off;
> +	if (of_device_is_system_power_controller(i2c->dev.of_node)) {
> +		if (!pm_power_off) {
> +			rn5t618_pm_power_off = priv;
> +			pm_power_off = rn5t618_power_off;
> +		} else {
> +			dev_err(&i2c->dev, "Failed to set poweroff capability, already defined\n");

This is not an error.  Please use dev_warn() instead.

Also, is this message actually accurate?  Your commit message would
indicate that it's not.

> +		}
>  	}
>  
>  	return 0;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog