[PATCH] [V3] mmc: mmci: add missing include of mmci_qcom_dml.h

[Ben Dooks]

On 16/06/16 19:47, Ben Dooks wrote:
> Fix the missing declarations of dml_start_xfer() and
> dml_hw_init() by including mmci_qcom_dml.h to fix the
> following warnings:
> 
> drivers/mmc/host/mmci_qcom_dml.c:57:6: warning: symbol 'dml_start_xfer' was not declared. Should it be static?
> drivers/mmc/host/mmci_qcom_dml.c:122:5: warning: symbol 'dml_hw_init' was not declared. Should it be static?
> 
> Since the module build doesn't export symbols, also
> export the symbols from the mmci_qcom_dml.c file as
> otherwise the module link process won't work.
> 
> It is possible this also fixes up module loading when
> both drivers are built as modules and not inserted in
> the correct order.
> 
> Note, since this is a very small addition to the mmci
> module, it would better to build it into the main mmci
> driver (either by direct copy, or multiple linked
> module)
> 
> Signed-off-by: Ben Dooks <ben.dooks at codethink.co.uk>
> ---
> V1..V2:
>   - deal with module build errors
> V2..V3:
>   - add original authour and update list of recipients
> ---

I'm now wondering if I should split it into fixup the
module issues and fix the include once those are fixed.
Anyone want to comment?

> Cc: Srinivas Kandagatla <srinivas.kandagatla at linaro.org>
> Cc: Ulf Hansson <ulf.hansson at linaro.org>
> Cc: linux-mmc at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> ---
>  drivers/mmc/host/mmci_qcom_dml.c | 3 +++
>  drivers/mmc/host/mmci_qcom_dml.h | 2 +-
>  2 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mmc/host/mmci_qcom_dml.c b/drivers/mmc/host/mmci_qcom_dml.c
> index 2b7fc37..06858bd 100644
> --- a/drivers/mmc/host/mmci_qcom_dml.c
> +++ b/drivers/mmc/host/mmci_qcom_dml.c
> @@ -18,6 +18,7 @@
>  #include <linux/mmc/host.h>
>  #include <linux/mmc/card.h>
>  #include "mmci.h"
> +#include "mmci_qcom_dml.h"
>  
>  /* Registers */
>  #define DML_CONFIG			0x00
> @@ -97,6 +98,7 @@ void dml_start_xfer(struct mmci_host *host, struct mmc_data *data)
>  	/* make sure the dml is configured before dma is triggered */
>  	wmb();
>  }
> +EXPORT_SYMBOL_GPL(dml_start_xfer);
>  
>  static int of_get_dml_pipe_index(struct device_node *np, const char *name)
>  {
> @@ -175,3 +177,4 @@ int dml_hw_init(struct mmci_host *host, struct device_node *np)
>  
>  	return 0;
>  }
> +EXPORT_SYMBOL_GPL(dml_hw_init);
> diff --git a/drivers/mmc/host/mmci_qcom_dml.h b/drivers/mmc/host/mmci_qcom_dml.h
> index 6e405d0..d77873d 100644
> --- a/drivers/mmc/host/mmci_qcom_dml.h
> +++ b/drivers/mmc/host/mmci_qcom_dml.h
> @@ -15,7 +15,7 @@
>  #ifndef __MMC_QCOM_DML_H__
>  #define __MMC_QCOM_DML_H__
>  
> -#ifdef CONFIG_MMC_QCOM_DML
> +#if defined(CONFIG_MMC_QCOM_DML) || defined(CONFIG_MMC_QCOM_DML_MODULE)
>  int dml_hw_init(struct mmci_host *host, struct device_node *np);
>  void dml_start_xfer(struct mmci_host *host, struct mmc_data *data);
>  #else
> 


-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius