[PATCH v2 03/10] mfd: ac100: Add driver for X-Powers AC100 audio codec / RTC combo IC

[Lee Jones]

On Wed, 15 Jun 2016, Chen-Yu Tsai wrote:

> On Wed, Jun 15, 2016 at 8:36 PM, Lee Jones <lee.jones at linaro.org> wrote:
> > On Wed, 15 Jun 2016, Chen-Yu Tsai wrote:
> >
> >> The AC100 is a multifunction device with an audio codec subsystem and
> >> an RTC subsystem. These two subsystems share a common register space
> >> and host interface.
> >>
> >> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> >> ---
> >
> > Change log?
> 
> Change log was in the cover letter. Changes were the addition of the
> codec related register macros and regmap ranges.

Patch specific change logs are more helpful.

> >>  drivers/mfd/Kconfig       |  10 +++
> >>  drivers/mfd/Makefile      |   2 +
> >>  drivers/mfd/ac100.c       | 135 +++++++++++++++++++++++++++++++++++
> >>  include/linux/mfd/ac100.h | 176 ++++++++++++++++++++++++++++++++++++++++++++++
> >>  4 files changed, 323 insertions(+)
> >>  create mode 100644 drivers/mfd/ac100.c
> >>  create mode 100644 include/linux/mfd/ac100.h
> >>
> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> >> index 1bcf601de5bc..bd83849a0c8d 100644
> >> --- a/drivers/mfd/Kconfig
> >> +++ b/drivers/mfd/Kconfig
> >> @@ -101,6 +101,16 @@ config MFD_BCM590XX
> >>       help
> >>         Support for the BCM590xx PMUs from Broadcom
> >>
> >> +config MFD_AC100
> >> +     tristate "X-Powers AC100"
> >> +     select MFD_CORE
> >> +     depends on SUNXI_RSB
> >> +     help
> >> +       If you say Y here you get support for the X-Powers AC100 audio codec
> >> +       IC.
> >> +       This driver include only the core APIs. You have to select individual
> >> +       components like codecs or RTC under the corresponding menus.
> >> +
> >>  config MFD_AXP20X
> >>       tristate
> >>       select MFD_CORE
> >> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> >> index 42a66e19e191..60f9a6b0557c 100644
> >> --- a/drivers/mfd/Makefile
> >> +++ b/drivers/mfd/Makefile
> >> @@ -113,6 +113,8 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
> >>  obj-$(CONFIG_PMIC_DA9052)    += da9052-core.o
> >>  obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
> >>  obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
> >> +
> >> +obj-$(CONFIG_MFD_AC100)              += ac100.o
> >>  obj-$(CONFIG_MFD_AXP20X)     += axp20x.o
> >>  obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
> >>  obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
> >> diff --git a/drivers/mfd/ac100.c b/drivers/mfd/ac100.c
> >> new file mode 100644
> >> index 000000000000..15d24fa77771
> >> --- /dev/null
> >> +++ b/drivers/mfd/ac100.c
> >> @@ -0,0 +1,135 @@
> >> +/*
> >> + * ac100.c - MFD core driver for X-Powers' AC100 Audio Codec IC
> >
> > Nit: Drop the filename here.
> >
> > Apart from that:
> >   Acked-by: Lee Jones <lee.jones at linaro.org>
> 
> Thanks.
> ChenYu

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog