[PATCH v2 03/10] mfd: ac100: Add driver for X-Powers AC100 audio codec / RTC combo IC

Chen-Yu Tsai wens at csie.org
Wed Jun 15 05:41:35 PDT 2016


On Wed, Jun 15, 2016 at 8:36 PM, Lee Jones <lee.jones at linaro.org> wrote:
> On Wed, 15 Jun 2016, Chen-Yu Tsai wrote:
>
>> The AC100 is a multifunction device with an audio codec subsystem and
>> an RTC subsystem. These two subsystems share a common register space
>> and host interface.
>>
>> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
>> ---
>
> Change log?

Change log was in the cover letter. Changes were the addition of the
codec related register macros and regmap ranges.

>>  drivers/mfd/Kconfig       |  10 +++
>>  drivers/mfd/Makefile      |   2 +
>>  drivers/mfd/ac100.c       | 135 +++++++++++++++++++++++++++++++++++
>>  include/linux/mfd/ac100.h | 176 ++++++++++++++++++++++++++++++++++++++++++++++
>>  4 files changed, 323 insertions(+)
>>  create mode 100644 drivers/mfd/ac100.c
>>  create mode 100644 include/linux/mfd/ac100.h
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 1bcf601de5bc..bd83849a0c8d 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -101,6 +101,16 @@ config MFD_BCM590XX
>>       help
>>         Support for the BCM590xx PMUs from Broadcom
>>
>> +config MFD_AC100
>> +     tristate "X-Powers AC100"
>> +     select MFD_CORE
>> +     depends on SUNXI_RSB
>> +     help
>> +       If you say Y here you get support for the X-Powers AC100 audio codec
>> +       IC.
>> +       This driver include only the core APIs. You have to select individual
>> +       components like codecs or RTC under the corresponding menus.
>> +
>>  config MFD_AXP20X
>>       tristate
>>       select MFD_CORE
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 42a66e19e191..60f9a6b0557c 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -113,6 +113,8 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
>>  obj-$(CONFIG_PMIC_DA9052)    += da9052-core.o
>>  obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
>>  obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
>> +
>> +obj-$(CONFIG_MFD_AC100)              += ac100.o
>>  obj-$(CONFIG_MFD_AXP20X)     += axp20x.o
>>  obj-$(CONFIG_MFD_AXP20X_I2C) += axp20x-i2c.o
>>  obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o
>> diff --git a/drivers/mfd/ac100.c b/drivers/mfd/ac100.c
>> new file mode 100644
>> index 000000000000..15d24fa77771
>> --- /dev/null
>> +++ b/drivers/mfd/ac100.c
>> @@ -0,0 +1,135 @@
>> +/*
>> + * ac100.c - MFD core driver for X-Powers' AC100 Audio Codec IC
>
> Nit: Drop the filename here.
>
> Apart from that:
>   Acked-by: Lee Jones <lee.jones at linaro.org>

Thanks.
ChenYu



More information about the linux-arm-kernel mailing list