[PATCH 07/13] ARM: dts: r8a7792: initial SoC device tree
Geert Uytterhoeven
geert at linux-m68k.org
Wed Jun 1 02:23:48 PDT 2016
On Wed, Jun 1, 2016 at 12:24 AM, Sergei Shtylyov
<sergei.shtylyov at cogentembedded.com> wrote:
> The initial R8A7792 SoC device tree including 2 CPU cores, GIC, timer, SYSC,
> and the required clock descriptions.
>
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
>
> ---
> arch/arm/boot/dts/r8a7792.dtsi | 423 +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 423 insertions(+)
>
> Index: renesas/arch/arm/boot/dts/r8a7792.dtsi
> ===================================================================
> --- /dev/null
> +++ renesas/arch/arm/boot/dts/r8a7792.dtsi
> @@ -0,0 +1,423 @@
> +/*
> + * Device Tree Source for the r8a7792 SoC
> + *
> + * Copyright (C) 2016 Cogent Embedded Inc.
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2. This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include <dt-bindings/clock/r8a7792-clock.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h> is included
implicitly by the above.
> +#include <dt-bindings/power/r8a7792-sysc.h>
> +
> +/ {
> + compatible = "renesas,r8a7792";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a15";
> + reg = <0>;
> + clock-frequency = <1000000000>;
> + clocks = <&cpg_clocks R8A7792_CLK_Z>;
> + power-domains = <&sysc R8A7792_PD_CA15_CPU0>;
> + next-level-cache = <&L2_CA15>;
> + };
> +
> + cpu1: cpu at 1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a15";
> + reg = <1>;
> + clock-frequency = <1000000000>;
> + power-domains = <&sysc R8A7792_PD_CA15_CPU1>;
> + next-level-cache = <&L2_CA15>;
> + };
> +
> + L2_CA15: cache-controller at 0 {
> + compatible = "cache";
> + reg = <0>;
> + cache-unified;
> + cache-level = <2>;
> + power-domains = <&sysc R8A7792_PD_CA15_SCU>;
> + };
> + };
> +
> + gic: interrupt-controller at f1001000 {
It would be good to group all on-SoC devices under an "soc" node, like we
started doing for r8a7795.
> + clocks {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* External root clock */
> + extal_clk: extal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board. */
> + clock-frequency = <0>;
> + };
The fixed clocks should be at the root level these days.
> + /* Special CPG clocks */
> + cpg_clocks: cpg_clocks at e6150000 {
> + compatible = "renesas,r8a7792-cpg-clocks",
> + "renesas,rcar-gen2-cpg-clocks";
> + reg = <0 0xe6150000 0 0x1000>;
> + clocks = <&extal_clk>;
> + #clock-cells = <1>;
> + clock-output-names = "main", "pll0", "pll1", "pll3",
> + "lb", "qspi", "sdh", "sd0", "sd1",
> + "z";
"sdh", "sd0", and "sd1" do not exist. Please remove them.
> + z2_clk: z2 {
> + compatible = "fixed-factor-clock";
> + clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
> + #clock-cells = <0>;
> + clock-div = <2>;
> + clock-mult = <1>;
> + };
V2H doesn't have Z2.
> + i_clk: i {
> + compatible = "fixed-factor-clock";
> + clocks = <&cpg_clocks R8A7792_CLK_PLL1>;
> + #clock-cells = <0>;
> + clock-div = <2>;
> + clock-mult = <1>;
> + };
clock-div = <3>;
> + cp_clk: cp {
> + compatible = "fixed-factor-clock";
> + clocks = <&extal_clk>;
> + #clock-cells = <0>;
> + clock-div = <2>;
> + clock-mult = <1>;
> + };
On V2H, CP is derived from PLL1, cfr. CL.
The clock derived from EXTAL is called CPEX.
> + mstp1_clks: mstp1_clks at e6150134 {
> + compatible = "renesas,r8a7792-mstp-clocks",
> + "renesas,cpg-mstp-clocks";
> + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
> + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
> + <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
> + #clock-cells = <1>;
> + clock-indices = <
> + R8A7792_CLK_TMU1 R8A7792_CLK_TMU3
> + R8A7792_CLK_TMU2 R8A7792_CLK_CMT0
> + R8A7792_CLK_TMU0 R8A7792_CLK_VSP1DU1
> + R8A7792_CLK_VSP1DU0 R8A7792_CLK_VSP1_SY
> + >;
> + clock-output-names = "tmu1", "tmu3", "tmu2", "cmt0",
> + "tmu0", "vsp1du1", "vsp1du0",
These are called "vsp1-du1", "vsp1-du0" in all other R-Car Gen2 dtsis.
> + "vsp1-sy";
> + };
> + mstp2_clks: mstp2_clks at e6150138 {
> + compatible = "renesas,r8a7792-mstp-clocks",
> + "renesas,cpg-mstp-clocks";
> + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
> + clocks = <&mp_clk>, <&zs_clk>, <&zs_clk>;
> + #clock-cells = <1>;
> + clock-indices = <
> + R8A7792_CLK_MSIOF1
> + R8A7792_CLK_SYS_DMAC0 R8A7792_CLK_SYS_DMAC1
Wrong order of the DMACs.
> + >;
> + clock-output-names = "msiof1", "sys-dmac0", "sys-dmac1";
Wrong order of the DMACs.
> + };
> + mstp3_clks: mstp3_clks at e615013c {
> + compatible = "renesas,r8a7792-mstp-clocks",
> + "renesas,cpg-mstp-clocks";
> + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
> + clocks = <&cp_clk>, <&cpg_clocks R8A7792_CLK_SD0>,
As there's no SD0, this can't be correct.
> + <&rclk_clk>;
> + #clock-cells = <1>;
> + clock-indices = <
> + R8A7792_CLK_TPU0 R8A7792_CLK_SDHI0
> + R8A7792_CLK_CMT1
> + >;
> + clock-output-names = "tpu0", "sdhi0", "cmt1";
> + };
> + mstp5_clks: mstp5_clks at e6150144 {
> + compatible = "renesas,r8a7792-mstp-clocks",
> + "renesas,cpg-mstp-clocks";
> + reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
> + clocks = <&hp_clk>, <&extal_clk>, <&p_clk>;
> + #clock-cells = <1>;
> + clock-indices = <
> + R8A7792_CLK_AUDIO_DMAC0
> + R8A7792_CLK_THERMAL R8A7792_CLK_PWM
> + >;
> + clock-output-names = "thermal", "pwm", "audmac0";
clock-output-names = "audmac0", "thermal", "pwm";
> + };
> + mstp9_clks: mstp9_clks at e6150994 {
> + compatible = "renesas,r8a7792-mstp-clocks",
> + "renesas,cpg-mstp-clocks";
> + reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
> + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
> + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>,
> + <&cp_clk>, <&cp_clk>, <&p_clk>, <&p_clk>,
> + <&cpg_clocks R8A7792_CLK_QSPI>, <&cp_clk>,
> + <&cp_clk>, <&hp_clk>, <&cp_clk>, <&hp_clk>,
> + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
> + #clock-cells = <1>;
> + clock-indices = <
> + R8A7792_CLK_GPIO7 R8A7792_CLK_GPIO6
> + R8A7792_CLK_GPIO5 R8A7792_CLK_GPIO4
> + R8A7792_CLK_GPIO3 R8A7792_CLK_GPIO2
> + R8A7792_CLK_GPIO1 R8A7792_CLK_GPIO0
> + R8A7792_CLK_GPIO11 R8A7792_CLK_GPIO10
> + R8A7792_CLK_CAN1 R8A7792_CLK_CAN0
> + R8A7792_CLK_QSPI_MOD R8A7792_CLK_GPIO9
> + R8A7792_CLK_GPIO8 R8A7792_CLK_I2C5
> + R8A7792_CLK_IICDVFS R8A7792_CLK_I2C4
> + R8A7792_CLK_I2C3 R8A7792_CLK_I2C2
> + R8A7792_CLK_I2C1 R8A7792_CLK_I2C0
> + >;
> + clock-output-names = "gpio7", "gpio6", "gpio5", "gpio4",
> + "gpio3", "gpio2", "gpio1", "gpio0",
> + "gpio11", "gpio10", "can1", "can0",
These are called "rcan1", "rcan0" in other dtsis.
> + "qspi_mod", "gpio9", "gpio8",
> + "i2c5", "iic3", "i2c4", "i2c3",
> + "i2c2", "i2c1", "i2c0";
> + };
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
More information about the linux-arm-kernel
mailing list