[PATCH v2 03/12] ARM: dts: rockchip: override the clocks in i2s for kylin board

[Caesar Wang]

Heiko,

在 2016年01月09日 10:31, Heiko Stuebner 写道:
> Hi Caesar,
>
> Am Donnerstag, 7. Januar 2016, 16:25:46 schrieb Caesar Wang:
>> The sysclk seems be incorrect since we use the simple card for kylin
>> board.
>>
>> The simple card call:
>>
>> asoc_simple_card_probe ->
>>   asoc_simple_card_dai_link_of ->
>>    asoc_simple_card_sub_parse_of ->
>> ...
>> clk = of_clk_get(args.np, 0);
>> if (!IS_ERR(clk))
>> dai->sysclk = clk_get_rate(clk);
>>
>> The sysclk come from the first clock, then first clock is hclk_i2s
>> in i2s for rk3036 dtsi.
>> So, we can override the clocks to fit the simple card in here.
> It's not that effective, doing that change on a per-board level - as it
> would possibly need to be repeated for future boards.
> The i2s driver doesn't care, as it uses named clocks, so I instead did
> the swap in the rk3036.dtsi for all boards. Can you check if that is ok
> for you or if I did overlook something?

That's okay for me.

>
> Thanks
> Heiko
>
> ------- 8< -------
> Subject: [PATCH] ARM: dts: rockchip: swap i2s clock ordering on rk3036
>
> For sound setups using the simple-card mechanism, the main clock
> (sysclk) is expected to be the first element. For the i2s-driver
> itself it doesn't matter, as it uses named clocks, so we can just
> swap them.
>
> Reported-by: Caesar Wang <wxt at rock-chips.com>
> Signed-off-by: Heiko Stuebner <heiko at sntech.de>
> ---
>   arch/arm/boot/dts/rk3036.dtsi | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
> index 8f1bb0f..ee457a2 100644
> --- a/arch/arm/boot/dts/rk3036.dtsi
> +++ b/arch/arm/boot/dts/rk3036.dtsi
> @@ -241,8 +241,8 @@
>   		interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
>   		#address-cells = <1>;
>   		#size-cells = <0>;
> -		clock-names = "i2s_hclk", "i2s_clk";
> -		clocks = <&cru HCLK_I2S>, <&cru SCLK_I2S>;
> +		clock-names = "i2s_clk", "i2s_hclk";
> +		clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>;
>   		dmas = <&pdma 0>, <&pdma 1>;
>   		dma-names = "tx", "rx";
>   		pinctrl-names = "default";


-- 
Thanks,
Caesar