[PATCH v2 04/12] clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for sclk_i2s_out

[Caesar Wang]

SCLk_I2S_OUT is the noc bus clock for i2s module, this clock is used by
extra codecs.

Due to it shouldn't belong to any driver, but we need it enabled,
so just mark it as the CLK_IGNORE_UNUSED flag.

Signed-off-by: Caesar Wang <wxt at rock-chips.com>
---

Changes in v2: None

 drivers/clk/rockchip/clk-rk3036.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index 34c78f4..c33ed3c 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -310,7 +310,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(7), 0,
 			RK2928_CLKGATE_CON(0), 10, GFLAGS,
 			&rk3036_i2s_fracmux),
-	COMPOSITE_NODIV(SCLK_I2S_OUT, "i2s_clkout", mux_i2s_clkout_p, 0,
+	COMPOSITE_NODIV(SCLK_I2S_OUT, "i2s_clkout", mux_i2s_clkout_p, CLK_IGNORE_UNUSED,
 			RK2928_CLKSEL_CON(3), 12, 1, MFLAGS,
 			RK2928_CLKGATE_CON(0), 13, GFLAGS),
 	GATE(SCLK_I2S, "sclk_i2s", "i2s_pre", CLK_SET_RATE_PARENT,
-- 
1.9.1