[PATCH] ARM: dts: silk: add sound support

Sergei Shtylyov sergei.shtylyov at cogentembedded.com
Thu Feb 11 12:26:38 PST 2016


Define the SILK board dependent part of the R8A7794 sound  device node.
Add device node for Asahi Kasei AK4643 stereo codec to the I2C1 bus.
Add the "simple-audio-card" device node to interconnect the SoC sound
device  and the codec.

This patch is based on the commit 493b4da7c10c ("ARM: dts: porter: add
sound support").

Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

---
This patch is against the 'renesas-devel-20160209-v4.5-rc3' tag of Simon
Horman's 'renesas.git' repo. It depends on the 5 R8A7794 sound support patches
in posted earlier this week  in order to build and the R8A7794 PFC driver
patches posted yesterday in  order  for  the pins to be properly configured
(but works without the pins  configured  too)...

 arch/arm/boot/dts/r8a7794-silk.dts |   71 +++++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7794-silk.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7794-silk.dts
+++ renesas/arch/arm/boot/dts/r8a7794-silk.dts
@@ -10,6 +10,17 @@
  * kind, whether express or implied.
  */
 
+/*
+ * SSI-AK4643
+ *
+ * SW1: 2-1: AK4643
+ *      2-3: ADV7511
+ *
+ * This command is required before playback/capture:
+ *
+ *	amixer set "LINEOUT Mixer DACL" on
+ */
+
 /dts-v1/;
 #include "r8a7794.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -119,6 +130,30 @@
 		#clock-cells = <0>;
 		clock-frequency = <74250000>;
 	};
+
+	x9_clk: x9-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+		clock-output-names = "audio_clock";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,format = "left_j";
+		simple-audio-card,bitclock-master = <&soundcodec>;
+		simple-audio-card,frame-master = <&soundcodec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		soundcodec: simple-audio-card,codec {
+			sound-dai = <&ak4643>;
+			clocks = <&x9_clk>;
+		};
+	};
 };
 
 &extal_clk {
@@ -183,6 +218,16 @@
 		renesas,groups = "usb1";
 		renesas,function = "usb1";
 	};
+
+	ssi_pins: sound {
+		renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+		renesas,function = "ssi";
+	};
+
+	audio_clk_pins: audio_clk {
+		renesas,groups = "audio_clkc";
+		renesas,function = "audio_clk";
+	};
 };
 
 &scif2 {
@@ -220,6 +265,12 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
+	ak4643: codec at 12 {
+		compatible = "asahi-kasei,ak4643";
+		#sound-dai-cells = <0>;
+		reg = <0x12>;
+	};
+
 	composite-in at 20 {
 		compatible = "adi,adv7180";
 		reg = <0x20>;
@@ -380,3 +431,23 @@
 		};
 	};
 };
+
+&rcar_sound {
+	pinctrl-0 = <&ssi_pins &audio_clk_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0>;
+			capture  = <&ssi1>;
+		};
+	};
+};
+
+&ssi1 {
+	shared-pin;
+};




More information about the linux-arm-kernel mailing list