[PATCH 10/10] dt-bindings: sec: Update bindings for LS1012A

[Bhaskar Upadhaya]

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya at nxp.com>
---
 .../devicetree/bindings/crypto/fsl-sec5.txt        | 153 +++++++++++++++++++++
 1 file changed, 153 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/crypto/fsl-sec5.txt

diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec5.txt b/Documentation/devicetree/bindings/crypto/fsl-sec5.txt
new file mode 100644
index 0000000..7bcaa6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec5.txt
@@ -0,0 +1,153 @@
+SEC 5 is Freescale's Cryptographic Accelerator and Assurance Module (CAAM).
+Currently Freescale arm chip LS1012A is embedded with SEC 5.
+SEC 5 device tree binding include:
+   -SEC 5 Node
+   -Job Ring Node
+   -Full Example
+
+=====================================================================
+SEC 5 Node
+
+Description
+
+    Node defines the base address of the SEC 5 block.
+    This block specifies the address range of all global
+    configuration registers for the SEC 5 block.
+    For example, In LS1012A, we could see three SEC 5 node.
+
+PROPERTIES
+
+   - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v5.4".
+
+   - fsl,sec-era
+      Usage: optional
+      Value type: <u32>
+      Definition: A standard property. Define the 'ERA' of the SEC
+          device.
+
+   - #address-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing physical addresses in child nodes.
+
+   - #size-cells
+       Usage: required
+       Value type: <u32>
+       Definition: A standard property.  Defines the number of cells
+           for representing the size of physical addresses in
+           child nodes.
+
+   - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: A standard property.  Specifies the physical
+          address and length of the SEC 5 configuration registers.
+
+   - ranges
+       Usage: required
+       Value type: <prop-encoded-array>
+       Definition: A standard property.  Specifies the physical address
+           range of the SEC 5.0 register space (-SNVS not included).  A
+           triplet that includes the child address, parent address, &
+           length.
+
+   Note: All other standard properties (see the ePAPR) are allowed
+   but are optional.
+
+EXAMPLE
+	crypto: crypto at 1700000 {
+                        compatible = "fsl,sec-v5.4", "fsl,sec-v5.0",
+                                     "fsl,sec-v4.0";
+                        fsl,sec-era = <8>;
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges = <0x0 0x00 0x1700000 0x100000>;
+                        reg = <0x00 0x1700000 0x0 0x100000>;
+                        interrupts = <0 75 0x4>;
+	}
+
+=====================================================================
+Job Ring (JR) Node
+
+    Child of the crypto node defines data processing interface to SEC 5
+    across the peripheral bus for purposes of processing
+    cryptographic descriptors. The specified address
+    range can be made visible to one (or more) cores.
+    The interrupt defined for this node is controlled within
+    the address range of this node.
+
+  - compatible
+      Usage: required
+      Value type: <string>
+      Definition: Must include "fsl,sec-v5.4-job-ring".
+
+  - reg
+      Usage: required
+      Value type: <prop-encoded-array>
+      Definition: Specifies a two JR parameters:  an offset from
+           the parent physical address and the length the JR registers.
+
+   - interrupts
+      Usage: required
+      Value type: <prop_encoded-array>
+      Definition:  Specifies the interrupts generated by this
+           device.  The value of the interrupts property
+           consists of one interrupt specifier. The format
+           of the specifier is defined by the binding document
+           describing the node's interrupt parent.
+
+EXAMPLE
+	sec_jr0: jr at 10000 {
+		compatible = "fsl,sec-v5.4-job-ring",
+			"fsl,sec-v5.0-job-ring",
+			"fsl,sec-v4.0-job-ring";
+			reg = <0x10000 0x10000>;
+			interrupts = <0 71 0x4>;
+	};
+
+===================================================================
+Full Example
+
+Since some chips may contain more than one SEC, the dtsi contains
+only the node contents, not the node itself.  A chip using the SEC
+should include the dtsi inside each SEC node.  Example:
+
+In fsl-ls1012a.dtsi:
+
+	compatible = "fsl,sec-v5.4";
+	fsl,sec-era = <8>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	sec_jr0: jr at 10000 {
+		compatible = "fsl,sec-v5.4-job-ring",
+			"fsl,sec-v5.0-job-ring",
+			"fsl,sec-v4.0-job-ring";
+			reg = <0x10000 0x10000>;
+			interrupts = <0 71 0x4>;
+	};
+	sec_jr1: jr at 20000 {
+		compatible = "fsl,sec-v5.4-job-ring",
+			"fsl,sec-v5.0-job-ring",
+			"fsl,sec-v4.0-job-ring";
+			reg = <0x20000 0x10000>;
+			interrupts = <0 72 0x4>;
+	};
+	sec_jr2: jr at 30000 {
+		compatible = "fsl,sec-v5.4-job-ring",
+			"fsl,sec-v5.0-job-ring",
+			"fsl,sec-v4.0-job-ring";
+			reg = <0x30000 0x10000>;
+			interrupts = <0 73 0x4>;
+	};
+	sec_jr3: jr at 40000 {
+		compatible = "fsl,sec-v5.4-job-ring",
+			"fsl,sec-v5.0-job-ring",
+			"fsl,sec-v4.0-job-ring";
+			reg = <0x40000 0x10000>;
+			interrupts = <0 74 0x4>;
+	};
-- 
1.9.1