[PATCH 06/13] scpi: add priv_scpi_ops and fill legacy structure
Neil Armstrong
narmstrong at baylibre.com
Tue Aug 23 01:22:25 PDT 2016
On 08/19/2016 06:39 PM, Sudeep Holla wrote:
>
>
> On 18/08/16 11:10, Neil Armstrong wrote:
>> In order to use the legacy functions variants, add a new priv_scpi_ops
>> structure that will contain the internal alterne functions and then use these
>> alternate call in the probe function.
>>
>> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
>> ---
>> drivers/firmware/arm_scpi.c | 68 ++++++++++++++++++++++++++++++++++++++++++---
>> 1 file changed, 64 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
>> index b0d911b..3fe39fe 100644
>> --- a/drivers/firmware/arm_scpi.c
>> +++ b/drivers/firmware/arm_scpi.c
>> @@ -213,6 +213,7 @@ struct scpi_drvinfo {
>> struct scpi_ops *scpi_ops;
>> struct scpi_chan *channels;
>> struct scpi_dvfs_info *dvfs[MAX_DVFS_DOMAINS];
>> + const struct priv_scpi_ops *ops;
>> };
>>
>> /*
>> @@ -299,6 +300,17 @@ struct dev_pstate_set {
>> u8 pstate;
>> } __packed;
>>
>> +struct priv_scpi_ops {
>> + /* Internal Specific Ops */
>> + void (*handle_remote_msg)(struct mbox_client *c, void *msg);
>> + void (*tx_prepare)(struct mbox_client *c, void *msg);
>> + /* Message Specific Ops */
>> + int (*init_versions)(struct scpi_drvinfo *info);
>> + int (*dvfs_get_info)(u8 domain, struct dvfs_info *buf);
>> + /* System wide Ops */
>> + struct scpi_ops *scpi_ops;
>> +};
>> +
>
>
> I fail to understand the need for this. Can you please explain the issue
> you would face without this ?
>
>> static struct scpi_drvinfo *scpi_info;
>>
>> static int scpi_linux_errmap[SCPI_ERR_MAX] = {
>> @@ -695,9 +707,12 @@ static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain)
>> if (scpi_info->dvfs[domain]) /* data already populated */
>> return scpi_info->dvfs[domain];
>>
>> - ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO, &domain, sizeof(domain),
>> + if (scpi_info->ops && scpi_info->ops->dvfs_get_info)
>> + ret = scpi_info->ops->dvfs_get_info(domain, &buf);
>> + else
>> + ret = scpi_send_message(SCPI_CMD_GET_DVFS_INFO,
>> + &domain, sizeof(domain),
>> &buf, sizeof(buf));
>> -
>> if (ret)
>> return ERR_PTR(ret);
>>
>> @@ -855,6 +870,22 @@ static struct scpi_ops scpi_ops = {
>> .vendor_send_message = scpi_ext_send_message,
>> };
>>
>> +static struct scpi_ops legacy_scpi_ops = {
>> + .get_version = scpi_get_version,
>> + .clk_get_range = NULL,
>> + .clk_get_val = legacy_scpi_clk_get_val,
>> + .clk_set_val = legacy_scpi_clk_set_val,
>> + .dvfs_get_idx = legacy_scpi_dvfs_get_idx,
>> + .dvfs_set_idx = legacy_scpi_dvfs_set_idx,
>> + .dvfs_get_info = scpi_dvfs_get_info,
>> + .sensor_get_capability = legacy_scpi_sensor_get_capability,
>> + .sensor_get_info = legacy_scpi_sensor_get_info,
>> + .sensor_get_value = legacy_scpi_sensor_get_value,
>> + .device_get_power_state = NULL,
>> + .device_set_power_state = NULL,
>> + .vendor_send_message = legacy_scpi_send_message,
>
> I think we need not have this at all if you follow the suggestion I had
> in the previous patch. Try and let's see how it would look.
If you confirm you want the if/else as said in patch 4.
But clk_get_range, device_get/set_power_state are not available in legacy,
I think we should still have this alternate structure.
>> +};
>> +
>> struct scpi_ops *get_scpi_ops(void)
>> {
>> return scpi_info ? scpi_info->scpi_ops : NULL;
>> @@ -972,8 +1003,17 @@ static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch)
>> return 0;
>> }
>>
>> +static const struct priv_scpi_ops scpi_legacy_ops = {
>> + .handle_remote_msg = legacy_scpi_handle_remote_msg,
>> + .tx_prepare = legacy_scpi_tx_prepare,
>> + .init_versions = legacy_scpi_init_versions,
>> + .dvfs_get_info = legacy_scpi_dvfs_get_info,
>> + .scpi_ops = &legacy_scpi_ops,
>> +};
>> +
>
> Ditto, can go away.
>
Yes, in the if/else is_legacy variant this should go away.
Thanks,
Neil
More information about the linux-arm-kernel
mailing list