[PATCH v3 1/2] ARM64: zynqmp: Use 64bit size cell format
Michal Simek
michal.simek at xilinx.com
Tue Aug 9 06:40:23 PDT 2016
Use 64bit size cell format instead of 32bit for memory
description. Change 64bit sizes also for all others IPs.
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
Changes in v3:
- Get back to origin solution used in v1.
(https://lkml.org/lkml/2016/2/11/220)
PCIe has a need to describe 8GB and 256GB and this node is placed on
amba bus and IP itself is placed there. Getting pcie node out of amba
bus is wrong solution because it is not there in HW.
Space will be used for configuration and prefetchanble memory
Changes in v2:
- Use ranges for PS amba busses instead of changing them to
64 size cell
arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 2 +-
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 54 ++++++++++++++---------------
2 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index acb0527fdc4a..358089687a69 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -29,7 +29,7 @@
memory {
device_type = "memory";
- reg = <0x0 0x0 0x40000000>;
+ reg = <0x0 0x0 0x0 0x40000000>;
};
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 38c43103d610..d24014765111 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -14,7 +14,7 @@
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
- #size-cells = <1>;
+ #size-cells = <2>;
cpus {
#address-cells = <1>;
@@ -75,7 +75,7 @@
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
- ranges;
+ ranges = <0 0 0 0 0xffffffff>;
gic: interrupt-controller at f9010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
@@ -93,14 +93,14 @@
amba: amba {
compatible = "simple-bus";
#address-cells = <2>;
- #size-cells = <1>;
+ #size-cells = <2>;
ranges;
can0: can at ff060000 {
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clock-names = "can_clk", "pclk";
- reg = <0x0 0xff060000 0x1000>;
+ reg = <0x0 0xff060000 0x0 0x1000>;
interrupts = <0 23 4>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
@@ -111,7 +111,7 @@
compatible = "xlnx,zynq-can-1.0";
status = "disabled";
clock-names = "can_clk", "pclk";
- reg = <0x0 0xff070000 0x1000>;
+ reg = <0x0 0xff070000 0x0 0x1000>;
interrupts = <0 24 4>;
interrupt-parent = <&gic>;
tx-fifo-depth = <0x40>;
@@ -123,7 +123,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 57 4>, <0 57 4>;
- reg = <0x0 0xff0b0000 0x1000>;
+ reg = <0x0 0xff0b0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -134,7 +134,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
- reg = <0x0 0xff0c0000 0x1000>;
+ reg = <0x0 0xff0c0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -145,7 +145,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 61 4>, <0 61 4>;
- reg = <0x0 0xff0d0000 0x1000>;
+ reg = <0x0 0xff0d0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -156,7 +156,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 63 4>, <0 63 4>;
- reg = <0x0 0xff0e0000 0x1000>;
+ reg = <0x0 0xff0e0000 0x0 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -170,7 +170,7 @@
interrupts = <0 16 4>;
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0x0 0xff0a0000 0x1000>;
+ reg = <0x0 0xff0a0000 0x0 0x1000>;
};
i2c0: i2c at ff020000 {
@@ -178,7 +178,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
- reg = <0x0 0xff020000 0x1000>;
+ reg = <0x0 0xff020000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -188,7 +188,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
- reg = <0x0 0xff030000 0x1000>;
+ reg = <0x0 0xff030000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
};
@@ -196,7 +196,7 @@
sata: ahci at fd0c0000 {
compatible = "ceva,ahci-1v84";
status = "disabled";
- reg = <0x0 0xfd0c0000 0x2000>;
+ reg = <0x0 0xfd0c0000 0x0 0x2000>;
interrupt-parent = <&gic>;
interrupts = <0 133 4>;
};
@@ -206,7 +206,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
- reg = <0x0 0xff160000 0x1000>;
+ reg = <0x0 0xff160000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
};
@@ -215,13 +215,13 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 49 4>;
- reg = <0x0 0xff170000 0x1000>;
+ reg = <0x0 0xff170000 0x0 0x1000>;
clock-names = "clk_xin", "clk_ahb";
};
smmu: smmu at fd800000 {
compatible = "arm,mmu-500";
- reg = <0x0 0xfd800000 0x20000>;
+ reg = <0x0 0xfd800000 0x0 0x20000>;
#global-interrupts = <1>;
interrupt-parent = <&gic>;
interrupts = <0 157 4>,
@@ -236,7 +236,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 19 4>;
- reg = <0x0 0xff040000 0x1000>;
+ reg = <0x0 0xff040000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
@@ -247,7 +247,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 20 4>;
- reg = <0x0 0xff050000 0x1000>;
+ reg = <0x0 0xff050000 0x0 0x1000>;
clock-names = "ref_clk", "pclk";
#address-cells = <1>;
#size-cells = <0>;
@@ -258,7 +258,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
- reg = <0x0 0xff110000 0x1000>;
+ reg = <0x0 0xff110000 0x0 0x1000>;
timer-width = <32>;
};
@@ -267,7 +267,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
- reg = <0x0 0xff120000 0x1000>;
+ reg = <0x0 0xff120000 0x0 0x1000>;
timer-width = <32>;
};
@@ -276,7 +276,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
- reg = <0x0 0xff130000 0x1000>;
+ reg = <0x0 0xff130000 0x0 0x1000>;
timer-width = <32>;
};
@@ -285,7 +285,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
- reg = <0x0 0xff140000 0x1000>;
+ reg = <0x0 0xff140000 0x0 0x1000>;
timer-width = <32>;
};
@@ -294,7 +294,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
- reg = <0x0 0xff000000 0x1000>;
+ reg = <0x0 0xff000000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
};
@@ -303,7 +303,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
- reg = <0x0 0xff010000 0x1000>;
+ reg = <0x0 0xff010000 0x0 0x1000>;
clock-names = "uart_clk", "pclk";
};
@@ -312,7 +312,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 65 4>;
- reg = <0x0 0xfe200000 0x40000>;
+ reg = <0x0 0xfe200000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
};
@@ -321,7 +321,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 70 4>;
- reg = <0x0 0xfe300000 0x40000>;
+ reg = <0x0 0xfe300000 0x0 0x40000>;
clock-names = "clk_xin", "clk_ahb";
};
@@ -330,7 +330,7 @@
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 52 1>;
- reg = <0x0 0xfd4d0000 0x1000>;
+ reg = <0x0 0xfd4d0000 0x0 0x1000>;
timeout-sec = <10>;
};
};
--
1.9.1
More information about the linux-arm-kernel
mailing list