[PATCH 0/5] Fix regression introduced by set_irq_flags() removal
Thomas Petazzoni
thomas.petazzoni at free-electrons.com
Tue Oct 20 07:23:33 PDT 2015
Russell,
On Tue, 20 Oct 2015 15:17:36 +0100, Russell King - ARM Linux wrote:
> However, this is rather worrying. NOAUTOEN is supposed to avoid enabling
> the interrupt when the interrupt is claimed.
>
> If, as a result of Rob's patch, we now have a load of IRQs which are
> marked with NOAUTOEN which weren't, that's quite a large regression -
> possibly one which hasn't been properly found (not everyone tests -rc
> kernels) and we may be better to revert Rob's patch to avoid lots of
> breakge being reported when 4.3 is released.
I believe the problem is only for per-CPU interrupts. We have
IRQ_NOAUTOEN set for per-CPU interrupts because:
static inline void irq_set_percpu_devid_flags(unsigned int irq)
{
irq_set_status_flags(irq,
IRQ_NOAUTOEN | IRQ_PER_CPU | IRQ_NOTHREAD |
IRQ_NOPROBE | IRQ_PER_CPU_DEVID);
}
Calling set_irq_flags() used to have the effect of *clearing* the
IRQ_NOAUTOEN flag:
-void set_irq_flags(unsigned int irq, unsigned int iflags)
-{
- unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
-
- if (irq >= nr_irqs) {
- pr_err("Trying to set irq flags for IRQ%d\n", irq);
- return;
- }
-
- if (iflags & IRQF_VALID)
- clr |= IRQ_NOREQUEST;
- if (iflags & IRQF_PROBE)
- clr |= IRQ_NOPROBE;
- if (!(iflags & IRQF_NOAUTOEN))
- clr |= IRQ_NOAUTOEN;
- /* Order is clear bits in "clr" then set bits in "set" */
- irq_modify_status(irq, clr, set & ~clr);
-}
I.e, unless you were passing IRQF_NOAUTOEN in your set_irq_flags()
invocation, set_irq_flags() was automatically clearing the IRQ_NOAUTOEN
bit.
But this is really only a per-CPU interrupt problem, which probably
limits the potential regressions caused by Rob's change.
Thomas
--
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
More information about the linux-arm-kernel
mailing list