[PATCH 11/37] ARM: dts: dove-cm-a510: Fix regulator enable GPIO polarity

[Laurent Pinchart]

The enable GPIO is active low, but is flagged as active high in the gpio
property. As the gpio property flags are currently unused by the driver
this doesn't cause any issue for now, but will break later if the driver
starts making use of the flags. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 arch/arm/boot/dts/dove-cm-a510.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>

diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
index 59b4056b478f..d5d84a61437f 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dtsi
+++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
@@ -118,7 +118,7 @@
 			regulator-name = "WiFi Power";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+			gpio = <&gpio2 7 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
-- 
2.4.9