[RESEND PATCH v2 2/6] ARM: dts: Mark SDIO as non-removable in exynos5420-peach-pit

Javier Martinez Canillas javier at osg.samsung.com
Wed Nov 18 05:23:50 PST 2015


The Exynos5420 Peach Pit Chromebook has a Marvell WiFi SDIO chip which
can't neither be removed nor be detected. But the node isn't marked
as non-removable and instead has the broken-cd DT property.

This causes the device to be removed when the system enters into a
suspend state and the following warnings is shown after a resume:

[  181.944636] mmc2: error -2 during resume (card was removed?)

Also remove the card-detect-delay property that is not needed with
non-removable.

Signed-off-by: Javier Martinez Canillas <javier at osg.samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar at samsung.com>
---

 arch/arm/boot/dts/exynos5420-peach-pit.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 72ba6f032ed7..02e99dbafcfb 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -709,10 +709,9 @@
 &mmc_1 {
 	status = "okay";
 	num-slots = <1>;
-	broken-cd;
+	non-removable;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
-- 
2.4.3




More information about the linux-arm-kernel mailing list