[PATCH 09/11] tty: amba-pl011: remove ST micro registers from standard table

[Russell King]

Remove the ST micro registers from the standard table.  These registers
should never be accessed in non-ST micro variants.

Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
 drivers/tty/serial/amba-pl011.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 85c455c60e12..4cb282a377c0 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -75,8 +75,6 @@
 
 static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
 	[REG_DR] = UART01x_DR,
-	[REG_ST_DMAWM] = ST_UART011_DMAWM,
-	[REG_ST_TIMEOUT] = ST_UART011_TIMEOUT,
 	[REG_FR] = UART01x_FR,
 	[REG_LCRH_RX] = UART011_LCRH,
 	[REG_LCRH_TX] = UART011_LCRH,
@@ -89,15 +87,6 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
 	[REG_MIS] = UART011_MIS,
 	[REG_ICR] = UART011_ICR,
 	[REG_DMACR] = UART011_DMACR,
-	[REG_ST_XFCR] = ST_UART011_XFCR,
-	[REG_ST_XON1] = ST_UART011_XON1,
-	[REG_ST_XON2] = ST_UART011_XON2,
-	[REG_ST_XOFF1] = ST_UART011_XOFF1,
-	[REG_ST_XOFF2] = ST_UART011_XOFF2,
-	[REG_ST_ITCR] = ST_UART011_ITCR,
-	[REG_ST_ITIP] = ST_UART011_ITIP,
-	[REG_ST_ABCR] = ST_UART011_ABCR,
-	[REG_ST_ABIMSC] = ST_UART011_ABIMSC,
 };
 
 /* There is by now at least one vendor with differing details, so handle it */
-- 
2.1.0