[PATCH 08/11] tty: amba-pl011: clean up LCR register offsets
Russell King
rmk+kernel at arm.linux.org.uk
Tue Nov 3 06:51:34 PST 2015
As we can detect when the LCR register is split between TX and RX,
we don't need three entries in the table to deal with this. Reduce
this down to two entries by converting the REG_ST_LCRH_* entries to
standard REG_LCRH_* and remove REG_LCRH.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
drivers/tty/serial/amba-pl011.c | 40 ++++++++++++++--------------------------
drivers/tty/serial/amba-pl011.h | 5 ++---
2 files changed, 16 insertions(+), 29 deletions(-)
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index a13551a5e767..85c455c60e12 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -78,11 +78,10 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
[REG_ST_DMAWM] = ST_UART011_DMAWM,
[REG_ST_TIMEOUT] = ST_UART011_TIMEOUT,
[REG_FR] = UART01x_FR,
- [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX,
+ [REG_LCRH_RX] = UART011_LCRH,
+ [REG_LCRH_TX] = UART011_LCRH,
[REG_IBRD] = UART011_IBRD,
[REG_FBRD] = UART011_FBRD,
- [REG_LCRH] = UART011_LCRH,
- [REG_ST_LCRH_TX] = ST_UART011_LCRH_TX,
[REG_CR] = UART011_CR,
[REG_IFLS] = UART011_IFLS,
[REG_IMSC] = UART011_IMSC,
@@ -105,8 +104,6 @@ static u16 pl011_std_offsets[REG_ARRAY_SIZE] = {
struct vendor_data {
const u16 *reg_offset;
unsigned int ifls;
- unsigned int lcrh_tx;
- unsigned int lcrh_rx;
bool oversampling;
bool dma_threshold;
bool cts_event_workaround;
@@ -124,8 +121,6 @@ static unsigned int get_fifosize_arm(struct amba_device *dev)
static struct vendor_data vendor_arm = {
.reg_offset = pl011_std_offsets,
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- .lcrh_tx = REG_LCRH,
- .lcrh_rx = REG_LCRH,
.oversampling = false,
.dma_threshold = false,
.cts_event_workaround = false,
@@ -148,11 +143,10 @@ static u16 pl011_st_offsets[REG_ARRAY_SIZE] = {
[REG_ST_DMAWM] = ST_UART011_DMAWM,
[REG_ST_TIMEOUT] = ST_UART011_TIMEOUT,
[REG_FR] = UART01x_FR,
- [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX,
+ [REG_LCRH_RX] = ST_UART011_LCRH_RX,
+ [REG_LCRH_TX] = ST_UART011_LCRH_TX,
[REG_IBRD] = UART011_IBRD,
[REG_FBRD] = UART011_FBRD,
- [REG_LCRH] = UART011_LCRH,
- [REG_ST_LCRH_TX] = ST_UART011_LCRH_TX,
[REG_CR] = UART011_CR,
[REG_IFLS] = UART011_IFLS,
[REG_IMSC] = UART011_IMSC,
@@ -179,8 +173,6 @@ static unsigned int get_fifosize_st(struct amba_device *dev)
static struct vendor_data vendor_st = {
.reg_offset = pl011_st_offsets,
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
- .lcrh_tx = REG_ST_LCRH_TX,
- .lcrh_rx = REG_ST_LCRH_RX,
.oversampling = true,
.dma_threshold = true,
.cts_event_workaround = true,
@@ -231,8 +223,6 @@ struct uart_amba_port {
unsigned int im; /* interrupt mask */
unsigned int old_status;
unsigned int fifosize; /* vendor-specific */
- unsigned int lcrh_tx; /* vendor-specific */
- unsigned int lcrh_rx; /* vendor-specific */
unsigned int old_cr; /* state during shutdown */
bool autorts;
unsigned int fixed_baud; /* vendor-set fixed baud rate */
@@ -1540,12 +1530,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = pl011_read(uap, uap->lcrh_tx);
+ lcr_h = pl011_read(uap, REG_LCRH_TX);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
- pl011_write(lcr_h, uap, uap->lcrh_tx);
+ pl011_write(lcr_h, uap, REG_LCRH_TX);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -1649,13 +1639,13 @@ static int pl011_hwinit(struct uart_port *port)
static bool pl011_split_lcrh(const struct uart_amba_port *uap)
{
- return pl011_reg_to_offset(uap, uap->lcrh_rx) !=
- pl011_reg_to_offset(uap, uap->lcrh_tx);
+ return pl011_reg_to_offset(uap, REG_LCRH_RX) !=
+ pl011_reg_to_offset(uap, REG_LCRH_TX);
}
static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
{
- pl011_write(lcr_h, uap, uap->lcrh_rx);
+ pl011_write(lcr_h, uap, REG_LCRH_RX);
if (pl011_split_lcrh(uap)) {
int i;
/*
@@ -1664,7 +1654,7 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h)
*/
for (i = 0; i < 10; ++i)
pl011_write(0xff, uap, REG_MIS);
- pl011_write(lcr_h, uap, uap->lcrh_tx);
+ pl011_write(lcr_h, uap, REG_LCRH_TX);
}
}
@@ -1789,9 +1779,9 @@ static void pl011_disable_uart(struct uart_amba_port *uap)
/*
* disable break condition and fifos
*/
- pl011_shutdown_channel(uap, uap->lcrh_rx);
+ pl011_shutdown_channel(uap, REG_LCRH_RX);
if (pl011_split_lcrh(uap))
- pl011_shutdown_channel(uap, uap->lcrh_tx);
+ pl011_shutdown_channel(uap, REG_LCRH_TX);
}
static void pl011_disable_interrupts(struct uart_amba_port *uap)
@@ -1992,7 +1982,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* ----------v----------v----------v----------v-----
- * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER
+ * NOTE: REG_LCRH_TX and REG_LCRH_RX MUST BE WRITTEN AFTER
* REG_FBRD & REG_IBRD.
* ----------^----------^----------^----------^-----
*/
@@ -2197,7 +2187,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
- lcr_h = pl011_read(uap, uap->lcrh_tx);
+ lcr_h = pl011_read(uap, REG_LCRH_TX);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -2460,8 +2450,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->reg_offset = vendor->reg_offset;
uap->vendor = vendor;
- uap->lcrh_rx = vendor->lcrh_rx;
- uap->lcrh_tx = vendor->lcrh_tx;
uap->fifosize = vendor->get_fifosize(dev);
uap->port.irq = dev->irq[0];
uap->port.ops = &amba_pl011_pops;
diff --git a/drivers/tty/serial/amba-pl011.h b/drivers/tty/serial/amba-pl011.h
index 0c6756dba2fe..411c60e1f9a4 100644
--- a/drivers/tty/serial/amba-pl011.h
+++ b/drivers/tty/serial/amba-pl011.h
@@ -6,11 +6,10 @@ enum {
REG_ST_DMAWM,
REG_ST_TIMEOUT,
REG_FR,
- REG_ST_LCRH_RX,
+ REG_LCRH_RX,
+ REG_LCRH_TX,
REG_IBRD,
REG_FBRD,
- REG_LCRH,
- REG_ST_LCRH_TX,
REG_CR,
REG_IFLS,
REG_IMSC,
--
2.1.0
More information about the linux-arm-kernel
mailing list