[RFC PATCH v1 1/3] PCI: designware: Add ARM64 support
Jingoo Han
jingoohan1 at gmail.com
Mon May 25 06:48:58 PDT 2015
On Monday, May 25, 2015 6:52 PM, Zhou Wang wrote:
> On 2015/5/25 13:10, Jingoo Han wrote:
> > On Wed, 20 May 2015 14:21:39 +0800, Zhou Wang wrote:
> >>
> >> This patch tries to unify ARM32 and ARM64 PCIe in designware driver. Delete
> >> function dw_pcie_setup, dw_pcie_scan_bus, dw_pcie_map_irq and struct hw_pci,
> >> move related operations to dw_pcie_host_init.
> >>
> >> I am not very clear about I/O resource management:
> >>> if (global_io_offset < SZ_1M && pp->io_size > 0) {
> >>> pci_ioremap_io(global_io_offset, pp->io_base);
> >>> global_io_offset += SZ_64K;
> >>> pci_add_resource_offset(&res, &pp->io,
> >>> global_io_offset - pp->io_bus_addr);
> >>> }
> >> so just move steps in dw_pcie_setup to dw_pcie_host_init.
> >>
> >> I have compiled the driver with multi_v7_defconfig. However, I don't have
> >> ARM32 PCIe related board to do test. It will be appreciated if someone could
> >> help to test it.
> >>
> >> Signed-off-by: Zhou Wang <wangzhou1 at hisilicon.com>
> >> ---
> >> drivers/pci/host/pcie-designware.c | 128 +++++++++++++++----------------------
> >> 1 file changed, 50 insertions(+), 78 deletions(-)
> >>
> >> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> >> index 2e9f84f..7bad9e5 100644
> >> --- a/drivers/pci/host/pcie-designware.c
> >> +++ b/drivers/pci/host/pcie-designware.c
> >> @@ -22,6 +22,7 @@
> >> #include <linux/pci_regs.h>
> >> #include <linux/platform_device.h>
> >> #include <linux/types.h>
> >> +#include <asm/hardirq.h>
> >
> > +cc Kishon Vijay Abraham I, Richard Zhu, Lucas Stach
> >
>
> Thanks to involve more related guys to this discussion :)
>
> > Please use <linux/hardirq.h> and insert it alphabetically.
> >
> > +#include <linux/hardirq.h>
> > #include <linux/irq.h>
> > #include <linux/irqdomain.h>
> > #include <linux/kernel.h>
> >
>
> OK, will do in next version patch.
>
> >>
> >> #include "pcie-designware.h"
> >>
> >> @@ -67,17 +68,10 @@
> >> #define PCIE_ATU_FUNC(x) (((x) & 0x7) << 16)
> >> #define PCIE_ATU_UPPER_TARGET 0x91C
> >>
> >> -static struct hw_pci dw_pci;
> >> +static struct pci_ops dw_pcie_ops;
> >>
> >> static unsigned long global_io_offset;
> >>
> >> -static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys)
> >> -{
> >> - BUG_ON(!sys->private_data);
> >> -
> >> - return sys->private_data;
> >> -}
> >> -
> >> int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val)
> >> {
> >> *val = readl(addr);
> >> @@ -238,7 +232,7 @@ static void dw_pcie_msi_set_irq(struct pcie_port *pp, int irq)
> >> static int assign_irq(int no_irqs, struct msi_desc *desc, int *pos)
> >> {
> >> int irq, pos0, i;
> >> - struct pcie_port *pp = sys_to_pcie(desc->dev->bus->sysdata);
> >> + struct pcie_port *pp = desc->dev->bus->sysdata;
> >>
> >> pos0 = bitmap_find_free_region(pp->msi_irq_in_use, MAX_MSI_IRQS,
> >> order_base_2(no_irqs));
> >> @@ -281,7 +275,7 @@ static int dw_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev,
> >> {
> >> int irq, pos;
> >> struct msi_msg msg;
> >> - struct pcie_port *pp = sys_to_pcie(pdev->bus->sysdata);
> >> + struct pcie_port *pp = pdev->bus->sysdata;
> >>
> >> if (desc->msi_attrib.is_msix)
> >> return -EINVAL;
> >> @@ -310,7 +304,7 @@ static void dw_msi_teardown_irq(struct msi_controller *chip, unsigned int irq)
> >> {
> >> struct irq_data *data = irq_get_irq_data(irq);
> >> struct msi_desc *msi = irq_data_get_msi(data);
> >> - struct pcie_port *pp = sys_to_pcie(msi->dev->bus->sysdata);
> >> + struct pcie_port *pp = msi->dev->bus->sysdata;
> >>
> >> clear_irq_range(pp, irq, 1, data->hwirq);
> >> }
> >> @@ -342,13 +336,15 @@ static const struct irq_domain_ops msi_domain_ops = {
> >> .map = dw_pcie_msi_map,
> >> };
> >>
> >> -int dw_pcie_host_init(struct pcie_port *pp)
> >> +int __init dw_pcie_host_init(struct pcie_port *pp)
> >> {
> >> struct device_node *np = pp->dev->of_node;
> >> struct platform_device *pdev = to_platform_device(pp->dev);
> >> struct of_pci_range range;
> >> struct of_pci_range_parser parser;
> >> + struct pci_bus *bus;
> >> struct resource *cfg_res;
> >> + LIST_HEAD(res);
> >> u32 val, na, ns;
> >> const __be32 *addrp;
> >> int i, index, ret;
> >> @@ -502,15 +498,49 @@ int dw_pcie_host_init(struct pcie_port *pp)
> >> val |= PORT_LOGIC_SPEED_CHANGE;
> >> dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val);
> >>
> >> -#ifdef CONFIG_PCI_MSI
> >> - dw_pcie_msi_chip.dev = pp->dev;
> >> - dw_pci.msi_ctrl = &dw_pcie_msi_chip;
> >> +#ifdef CONFIG_ARM
> >> + /*
> >> + * FIXME: we should really be able to use
> >> + * of_pci_get_host_bridge_resources on arm32 as well,
> >> + * but the conversion needs some more testing
> >> + */
> >> + if (global_io_offset < SZ_1M && pp->io_size > 0) {
> >> + pci_ioremap_io(global_io_offset, pp->io_base);
> >> + global_io_offset += SZ_64K;
> >> + pci_add_resource_offset(&res, &pp->io,
> >> + global_io_offset - pp->io_bus_addr);
> >> + }
> >> + pci_add_resource_offset(&res, &pp->mem,
> >> + pp->mem.start - pp->mem_bus_addr);
> >> + pci_add_resource(&res, &pp->busn);
> >> +#else
> >> + ret = of_pci_get_host_bridge_resources(np, 0, 0xff, &res, &pp->io_base);
> >> + if (ret)
> >> + return ret;
> >> +#endif
> >> +
> >> + bus = pci_create_root_bus(pp->dev, pp->root_bus_nr, &dw_pcie_ops,
> >> + pp, &res);
> >> + if (!bus)
> >> + return -ENOMEM;
> >> +
> >> +#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
> >> + bus->msi = container_of(&pp->irq_domain, struct msi_controller, domain);
> >> +#else
> >> + bus->msi = &dw_pcie_msi_chip;
> >> #endif
> >>
> >> - dw_pci.nr_controllers = 1;
> >> - dw_pci.private_data = (void **)&pp;
> >> + pci_scan_child_bus(bus);
> >> + if (pp->ops->scan_bus)
> >> + pp->ops->scan_bus(pp);
> >>
> >> - pci_common_init_dev(pp->dev, &dw_pci);
> >> +#ifdef CONFIG_ARM
> >> + /* support old dtbs that incorrectly describe IRQs */
> >> + pci_fixup_irqs(pci_common_swizzle, of_irq_parse_and_map_pci);
> >> +#endif
> >> +
> >> + pci_assign_unassigned_bus_resources(bus);
> >> + pci_bus_add_devices(bus);
> >>
> >> return 0;
> >> }
> >> @@ -653,7 +683,7 @@ static int dw_pcie_valid_config(struct pcie_port *pp,
> >> static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
> >> int size, u32 *val)
> >> {
> >> - struct pcie_port *pp = sys_to_pcie(bus->sysdata);
> >> + struct pcie_port *pp = bus->sysdata;
> >> int ret;
> >>
> >> if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0) {
> >> @@ -677,7 +707,7 @@ static int dw_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
> >> static int dw_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
> >> int where, int size, u32 val)
> >> {
> >> - struct pcie_port *pp = sys_to_pcie(bus->sysdata);
> >> + struct pcie_port *pp = bus->sysdata;
> >> int ret;
> >>
> >> if (dw_pcie_valid_config(pp, bus, PCI_SLOT(devfn)) == 0)
> >> @@ -701,64 +731,6 @@ static struct pci_ops dw_pcie_ops = {
> >> .write = dw_pcie_wr_conf,
> >> };
> >>
> >> -static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
> >> -{
> >> - struct pcie_port *pp;
> >> -
> >> - pp = sys_to_pcie(sys);
> >> -
> >> - if (global_io_offset < SZ_1M && pp->io_size > 0) {
> >> - sys->io_offset = global_io_offset - pp->io_bus_addr;
> >> - pci_ioremap_io(global_io_offset, pp->io_base);
> >> - global_io_offset += SZ_64K;
> >> - pci_add_resource_offset(&sys->resources, &pp->io,
> >> - sys->io_offset);
> >> - }
> >> -
> >> - sys->mem_offset = pp->mem.start - pp->mem_bus_addr;
> >> - pci_add_resource_offset(&sys->resources, &pp->mem, sys->mem_offset);
> >> - pci_add_resource(&sys->resources, &pp->busn);
> >> -
> >> - return 1;
> >> -}
> >> -
> >> -static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
> >> -{
> >> - struct pci_bus *bus;
> >> - struct pcie_port *pp = sys_to_pcie(sys);
> >> -
> >> - pp->root_bus_nr = sys->busnr;
> >
> > 'pp->root_bus_nr' is initialized as '-1' at some soc-specific drivers
> > However, 'sys->busnr' is set as '0, 1, 2 ...' by pcibios_init_hw()
> > in arch/arm/kernel/bios32.c. '0, 1, 2 ...' means the number of
> > each host controller.
> >
> > So, without setting 'pp->root_bus_nr' as '0, 1, 2, ...',
> > it makes the problem.
> >
>
> 'sys->busnr' is set as "0, busn_res.end + 1 ..." in pcibios_init_hw() I think:
>
> pcibios_init_hw()
> for (nr = busnr = 0; nr < hw->nr_controllers; nr++)
> sys->busnr = busnr;
> ...
> busnr = sys->bus->busn_res.end + 1;
>
> and it indicates root bus number of one pcie controller.
> so in dw_pcie_scan_bus:
> pp->root_bus_nr = sys->busnr;
> bus = pci_create_root_bus(..., sys->busnr, ...);
Oh, you're right. Sorry for my mistake.
> we set root bus number as "0, busn_res.end + 1". But in pcie-designware,
> nr_controllers is set as 1, so it only comes into the loop in
> pcibios_init_hw() one time.
Right, 'nr_controllers' is set as just '1', even though more than
2 controllers are used.
>
> so how about we set 0 as default value of pp->root_bus_nr, then use
> pci_create_root_bus(pp->dev, pp->root_bus_nr, &dw_pcie_ops, pp, &res);
> to create root bus?
I agree with your opinion. However, I still want to wait for other
people's opinions. They will give good comments.
Thank you.
Best regards,
Jingoo Han
>
> > Thus, we need to come up with the way to resolve this.
> >
> > 1. Setting 'pp->root_bus_nr' as '0, 1, 2 ..' by each soc-specific driver.
> >
> > e.g)
> >
> > ./drivers/pci/host/pci-exynos.c
> > @@ -534,7 +534,7 @@ static int __init exynos_add_pcie_port(struct pcie_port *pp,
> > }
> > }
> >
> > - pp->root_bus_nr = -1;
> > + pp->root_bus_nr++;
> > pp->ops = &exynos_pcie_host_ops;
> >
> > ./drivers/pci/host/pci-imx6.c
> > @@ -541,7 +541,7 @@ static int __init imx6_add_pcie_port(struct pcie_port *pp,
> > }
> > }
> >
> > - pp->root_bus_nr = -1;
> > + pp->root_bus_nr++;
> > pp->ops = &imx6_pcie_host_ops;
> >
> > ./drivers/pci/host/pci-keystone.c
> > @@ -312,7 +312,7 @@ static int __init ks_add_pcie_port(struct keystone_pcie *ks_pcie,
> > return ret;
> > }
> >
> > - pp->root_bus_nr = -1;
> > + pp->root_bus_nr++;
> > pp->ops = &keystone_pcie_host_ops;
> >
> > ./drivers/pci/host/pci-layerscape.c
> > @@ -101,7 +101,7 @@ static int ls_add_pcie_port(struct ls_pcie *pcie)
> > pp = &pcie->pp;
> > pp->dev = pcie->dev;
> > pp->dbi_base = pcie->dbi;
> > - pp->root_bus_nr = -1;
> > + pp->root_bus_nr++;
> > pp->ops = &ls_pcie_host_ops;
> >
> > ./drivers/pci/host/pcie-spear13xx.c
> > @@ -287,7 +287,7 @@ static int spear13xx_add_pcie_port(struct pcie_port *pp,
> > return ret;
> > }
> >
> > - pp->root_bus_nr = -1;
> > + pp->root_bus_nr++;
> > pp->ops = &spear13xx_pcie_host_ops;
> >
> >
> > 2. Setting 'pp->root_bus_nr' as '0, 1, 2 ..' by pcie-designware.c
> >
> > I believe that someone will give better idea. :-)
> >
> >> - bus = pci_create_root_bus(pp->dev, sys->busnr,
> >> - &dw_pcie_ops, sys, &sys->resources);
> >> - if (!bus)
> >> - return NULL;
> >> -
> >> - pci_scan_child_bus(bus);
> >> -
> >> - if (bus && pp->ops->scan_bus)
> >> - pp->ops->scan_bus(pp);
> >> -
> >> - return bus;
> >> -}
> >> -
> >> -static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
> >> -{
> >> - struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
> >> - int irq;
> >> -
> >> - irq = of_irq_parse_and_map_pci(dev, slot, pin);
> >> - if (!irq)
> >> - irq = pp->irq;
> >> -
> >> - return irq;
> >> -}
> >> -
> >> -static struct hw_pci dw_pci = {
> >> - .setup = dw_pcie_setup,
> >> - .scan = dw_pcie_scan_bus,
> >> - .map_irq = dw_pcie_map_irq,
> >> -};
> >
> > Right, 'struct hw_pci' should not be used in order to unify ARM32 and
> > ARM64. I have no objection to remove 'struct hw_pci' from 'pcie-designware.c'.
> > Thank you for your patch.
> >
> > Best regards,
> > Jingoo Han
> >
>
> Many thanks for your reviewing!
> Zhou Wang
>
> >> -
> >> void dw_pcie_setup_rc(struct pcie_port *pp)
> >> {
> >> u32 val;
> >> --
> >> 1.9.1
More information about the linux-arm-kernel
mailing list