[PATCH v5 3/3] ARM: dts: igep00x0: add wl18xx bindings

[Eliad Peller]

hi Javier,

On Wed, Mar 11, 2015 at 3:19 AM, Javier Martinez Canillas
<javier at dowhile0.org> wrote:
> Hello Eliad,
>
> On Wed, Mar 11, 2015 at 1:28 AM, Javier Martinez Canillas
> <javier at dowhile0.org> wrote:
>> On Mon, Mar 9, 2015 at 4:36 PM, Eliad Peller <eliad at wizery.com> wrote:
>>> --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
>>> +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts
>>> @@ -42,4 +42,13 @@
>>>         vmmc-supply = <&lbep5clwmc_wlen>;
>
> Something I forgot to mention is that this vmmc-supply is a DT hack
> since the WLAN SDIO chip needs a WL_EN signal to be asserted as a part
> of the chip power sequencing.
>
> But there wasn't a DT binding to describe that so most boards use the
> same hack which is to define a fake fixed-regulator with an enable
> GPIO just to toggle that pin.
>
> But now the MMC subsystem has support for power sequence providers and
> the pwrseq-simple driver
> (Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt) has
> support for reset GPIOs so you may want to change that as well.
>
interesting. i wasn't aware of it.
but that's for a different time i guess :)

thanks,
Eliad.