mx6 hdmi resolution behaviour

[Fabio Estevam]

Hi,

On a imx6q-cubox-i running 4.1 kernel I am getting 1920x1080 HDMI
resolution if I boot the board with the HDMI cable connected.

If I boot it without the HDMI cable and then connect it afterwards,
the resolution goes to only 1024 x 768 and the following IPU message
is seen:

[   16.310548] imx-ipuv3 2400000.ipu: videomode adapted for IPU restrictions

Shouldn't we get 1920x1080 in this case as well?

Regards,

Fabio Estevam