[PATCH v7 5/7] arm64: Add trampoline code for kretprobes
William Cohen
wcohen at redhat.com
Tue Jun 16 08:09:59 PDT 2015
On 06/15/2015 03:07 PM, David Long wrote:
> From: William Cohen <wcohen at redhat.com>
>
> The trampoline code is used by kretprobes to capture a return from a probed
> function. This is done by saving the registers, calling the handler, and
> restoring the registers. The code then returns to the roginal saved caller
s/roginal/original
> return address. It is necessary to do this directly instead of using a
> software breakpoint because the code used in processing that breakpoint
> could itself be kprobe'd and cause a problematic reentry into the debug
> exception handler.
>
> Signed-off-by: William Cohen <wcohen at redhat.com>
> Signed-off-by: David A. Long <dave.long at linaro.org>
> ---
> arch/arm64/include/asm/kprobes.h | 1 +
> arch/arm64/kernel/kprobes-arm64.h | 41 +++++++++++++++++++++++++++++++++++++++
> arch/arm64/kernel/kprobes.c | 26 +++++++++++++++++++++++++
> 3 files changed, 68 insertions(+)
>
> diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h
> index af31c4d..d081f49 100644
> --- a/arch/arm64/include/asm/kprobes.h
> +++ b/arch/arm64/include/asm/kprobes.h
> @@ -58,5 +58,6 @@ int kprobe_exceptions_notify(struct notifier_block *self,
> unsigned long val, void *data);
> int kprobe_breakpoint_handler(struct pt_regs *regs, unsigned int esr);
> int kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr);
> +void kretprobe_trampoline(void);
>
> #endif /* _ARM_KPROBES_H */
> diff --git a/arch/arm64/kernel/kprobes-arm64.h b/arch/arm64/kernel/kprobes-arm64.h
> index ff8a55f..bdcfa62 100644
> --- a/arch/arm64/kernel/kprobes-arm64.h
> +++ b/arch/arm64/kernel/kprobes-arm64.h
> @@ -27,4 +27,45 @@ extern kprobes_pstate_check_t * const kprobe_condition_checks[16];
> enum kprobe_insn __kprobes
> arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi);
>
> +#define SAVE_REGS_STRING\
> + " stp x0, x1, [sp, #16 * 0]\n" \
> + " stp x2, x3, [sp, #16 * 1]\n" \
> + " stp x4, x5, [sp, #16 * 2]\n" \
> + " stp x6, x7, [sp, #16 * 3]\n" \
> + " stp x8, x9, [sp, #16 * 4]\n" \
> + " stp x10, x11, [sp, #16 * 5]\n" \
> + " stp x12, x13, [sp, #16 * 6]\n" \
> + " stp x14, x15, [sp, #16 * 7]\n" \
> + " stp x16, x17, [sp, #16 * 8]\n" \
> + " stp x18, x19, [sp, #16 * 9]\n" \
> + " stp x20, x21, [sp, #16 * 10]\n" \
> + " stp x22, x23, [sp, #16 * 11]\n" \
> + " stp x24, x25, [sp, #16 * 12]\n" \
> + " stp x26, x27, [sp, #16 * 13]\n" \
> + " stp x28, x29, [sp, #16 * 14]\n" \
> + " str x30, [sp, #16 * 15]\n" \
> + " mrs x0, nzcv\n" \
> + " str x0, [sp, #8 * 33]\n"
> +
> +
> +#define RESTORE_REGS_STRING\
> + " ldr x0, [sp, #8 * 33]\n" \
> + " msr nzcv, x0\n" \
> + " ldp x0, x1, [sp, #16 * 0]\n" \
> + " ldp x2, x3, [sp, #16 * 1]\n" \
> + " ldp x4, x5, [sp, #16 * 2]\n" \
> + " ldp x6, x7, [sp, #16 * 3]\n" \
> + " ldp x8, x9, [sp, #16 * 4]\n" \
> + " ldp x10, x11, [sp, #16 * 5]\n" \
> + " ldp x12, x13, [sp, #16 * 6]\n" \
> + " ldp x14, x15, [sp, #16 * 7]\n" \
> + " ldp x16, x17, [sp, #16 * 8]\n" \
> + " ldp x18, x19, [sp, #16 * 9]\n" \
> + " ldp x20, x21, [sp, #16 * 10]\n" \
> + " ldp x22, x23, [sp, #16 * 11]\n" \
> + " ldp x24, x25, [sp, #16 * 12]\n" \
> + " ldp x26, x27, [sp, #16 * 13]\n" \
> + " ldp x28, x29, [sp, #16 * 14]\n" \
> + " ldr x30, [sp, #16 * 15]\n"
> +
> #endif /* _ARM_KERNEL_KPROBES_ARM64_H */
> diff --git a/arch/arm64/kernel/kprobes.c b/arch/arm64/kernel/kprobes.c
> index 6255814..570218c 100644
> --- a/arch/arm64/kernel/kprobes.c
> +++ b/arch/arm64/kernel/kprobes.c
> @@ -560,6 +560,32 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
> return 0;
> }
>
> +/*
> + * When a retprobed function returns, this code saves registers and
> + * calls trampoline_handler() runs, which calls the kretprobe's handler.
> + */
> +static void __used __kprobes kretprobe_trampoline_holder(void)
> +{
> + asm volatile (".global kretprobe_trampoline\n"
> + "kretprobe_trampoline:\n"
> + "sub sp, sp, %0\n"
> + SAVE_REGS_STRING
> + "mov x0, sp\n"
> + "bl trampoline_probe_handler\n"
> + /* Replace trampoline address in lr with actual
> + orig_ret_addr return address. */
> + "str x0, [sp, #16 * 15]\n"
> + RESTORE_REGS_STRING
> + "add sp, sp, %0\n"
> + "ret\n"
> + : : "I"(sizeof(struct pt_regs)) : "memory");
> +}
> +
> +static void __kprobes __used *trampoline_probe_handler(struct pt_regs *regs)
> +{
> + return (void *) 0;
> +}
> +
> int __init arch_init_kprobes(void)
> {
> return 0;
>
More information about the linux-arm-kernel
mailing list