[PATCH] ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline

[Hans de Goede]

Hi,

On 19-01-15 22:32, Maxime Ripard wrote:
> On Mon, Jan 19, 2015 at 02:46:00PM +0100, Hans de Goede wrote:
>> Hi,
>>
>> On 19-01-15 14:35, Hans de Goede wrote:
>>> Hi,
>>>
>>> On 19-01-15 14:20, Maxime Ripard wrote:
>>>> Hi Hans,
>>>>
>>>> On Mon, Jan 19, 2015 at 02:01:17PM +0100, Hans de Goede wrote:
>>>>> Testing has shown that on sun4i the display backend engine does not have
>>>>> deep enough fifo-s causing flickering / tearing in full-hd mode due to
>>>>> fifo underruns. This can be avoided by letting the display frontend engine
>>>>> do the dma from memory, and then letting it feed the data directly into
>>>>> the backend unmodified, as the frontend does have deep enough fifo-s.
>>>>>
>>>>> Note since u-boot-v2015.01 has been released using the de_be0-lcd0-hdmi
>>>>> pipeline on sun4i, we need to keep that one around too (unfortunately).
>>>>>
>>>>> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
>>>>> ---
>>>>>   arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
>>>>>   1 file changed, 8 insertions(+)
>>>>>
>>>>> diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
>>>>> index f5e35b5..ccd60e3 100644
>>>>> --- a/arch/arm/boot/dts/sun4i-a10.dtsi
>>>>> +++ b/arch/arm/boot/dts/sun4i-a10.dtsi
>>>>> @@ -44,6 +44,14 @@
>>>>>                    <&ahb_gates 44>;
>>>>>               status = "disabled";
>>>>>           };
>>>>> +
>>>>> +        framebuffer at 1 {
>>>>> +            compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
>>>>> +            allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
>>>>> +            clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
>>>>> +                 <&ahb_gates 44>, <&ahb_gates 46>;
>>>>> +            status = "disabled";
>>>>> +        };
>>>>
>>>> Thanks for this.
>>>>
>>>> I do have a question though, maybe I'm missing something, but what
>>>> would prevent us from using the existing node already? The output
>>>> pipeline seems to be the same, at least for which output we
>>>> use. Wether we use or not the display frontend looks like an
>>>> implementation detail.
>>>
>>> The purpose of having a node per pipeline is to have the rights clocks
>>> listed for the pipeline chosen. So the "de_fe0-de_be0-lcd0-hdmi" node
>>> has one ahb_gates entry more so as to make sure the kernel does not gate
>>> off the frontend.
>>>
>>> The idea of having different nodes per pipeline is that when we get
>>> support for more module clocks in place, as a preparation for kms
>>> support, we can add the module clocks to the relevant nodes, to also
>>> ensure the module clocks will not get turned off.
>>>
>>> By having this info in the dtb, rather then in u-boot we can update
>>> the clocks list as we add new clock nodes in the dtb, ensuring that
>>> an older u-boot will keep working as we add support for module
>>> clocks, etc.
>>
>> Hmm, thinking more about this, and about how u-boot searches for
>> the simplefb node, I think that having a single node like this:
>>
>>          framebuffer at 0 {
>>              compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
>>              /* This node is for de_fe0-de_be0-lcd0-hdmi, but we also declare de_be0-lcd0-hdmi
>>                 for compatibility with u-boot-v2015.01 which does not use the frontend */
>>              allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi", "de_be0-lcd0-hdmi";
>>              clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
>>                   <&ahb_gates 44>, <&ahb_gates 46>;
>>              status = "disabled";
>>          };
>>
>> Should work, but this will cause simplefb to enable the frontend ahb gate
>> even if it is not used (this will only impact u-boot-v2015.01 users), and as
>> such feels wrong, so I would prefer to go with my patch as is.
>
> That's actually what I had in mind. It didn't feel that wrong, since
> it pretty much mimics the compatible behaviour, but it's your call.

If it is my call then I would prefer to go with the 2 separate nodes + v2
of my lcd / vga nodes addition patch. If things indeed do become the combinatorial
explosion you fear in the future, then we can always move to listing multiple
pipelines in one node then.

Thanks & Regards,

Hans