[PATCH] ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline

[Maxime Ripard]

On Mon, Jan 19, 2015 at 02:35:41PM +0100, Hans de Goede wrote:
> Hi,
> 
> On 19-01-15 14:20, Maxime Ripard wrote:
> >Hi Hans,
> >
> >On Mon, Jan 19, 2015 at 02:01:17PM +0100, Hans de Goede wrote:
> >>Testing has shown that on sun4i the display backend engine does not have
> >>deep enough fifo-s causing flickering / tearing in full-hd mode due to
> >>fifo underruns. This can be avoided by letting the display frontend engine
> >>do the dma from memory, and then letting it feed the data directly into
> >>the backend unmodified, as the frontend does have deep enough fifo-s.
> >>
> >>Note since u-boot-v2015.01 has been released using the de_be0-lcd0-hdmi
> >>pipeline on sun4i, we need to keep that one around too (unfortunately).
> >>
> >>Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> >>---
> >>  arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
> >>  1 file changed, 8 insertions(+)
> >>
> >>diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
> >>index f5e35b5..ccd60e3 100644
> >>--- a/arch/arm/boot/dts/sun4i-a10.dtsi
> >>+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
> >>@@ -44,6 +44,14 @@
> >>  				 <&ahb_gates 44>;
> >>  			status = "disabled";
> >>  		};
> >>+
> >>+		framebuffer at 1 {
> >>+			compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
> >>+			allwinner,pipeline = "de_fe0-de_be0-lcd0-hdmi";
> >>+			clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
> >>+				 <&ahb_gates 44>, <&ahb_gates 46>;
> >>+			status = "disabled";
> >>+		};
> >
> >Thanks for this.
> >
> >I do have a question though, maybe I'm missing something, but what
> >would prevent us from using the existing node already? The output
> >pipeline seems to be the same, at least for which output we
> >use. Wether we use or not the display frontend looks like an
> >implementation detail.
> 
> The purpose of having a node per pipeline is to have the rights clocks
> listed for the pipeline chosen. So the "de_fe0-de_be0-lcd0-hdmi" node
> has one ahb_gates entry more so as to make sure the kernel does not gate
> off the frontend.
> 
> The idea of having different nodes per pipeline is that when we get
> support for more module clocks in place, as a preparation for kms
> support, we can add the module clocks to the relevant nodes, to also
> ensure the module clocks will not get turned off.
> 
> By having this info in the dtb, rather then in u-boot we can update
> the clocks list as we add new clock nodes in the dtb, ensuring that
> an older u-boot will keep working as we add support for module
> clocks, etc.

Yeah, I know that, and it's exactly why we have these nodes
pre-populated it. But my point was exactly that: Why not leverage the
fact that we have that possibility to add the missing clock for the
frontend, and just use that.

> >That or just having several strings in allwinner,pipeline.
> >
> >If this simplefb binding is just going to be a collection of all the
> >various combinations we have, plus the legacy options, I'm a bit
> >worried that this is just going to be a hell to maintain, without any
> >way to remove it at compile time (if such feature is ever merged in
> >DTC).
> 
> I can understand where you're coming from, I wish I could say there
> will be no more surprises / additions, but I don't want to make
> promises I cannot keep. I do not see u-boot adding support for multiple
> displays anytime soon, so things should stay limited to 3 nodes (one for
> hdmi, lcd and vga each) or 2 nodes on socs without hdmi.
> 
> Except on sun4i where we need 2 for hdmi for compat reasons for a total
> of 4.
> 
> But my crystal ball is defunct, so I cannot promise things will stay
> limited to this.

Heh :)

I'm not really asking for a crystal ball. I even expect that list to
grow, as some board will probably need the second display engine on
SoCs that have one, and that's ok. But my concern is more that we will
end up with multiple similar options, including ones that we know are
not in use, but can't really remove either.

But yeah, ok.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150119/90306fb9/attachment.sig>