[PATCH v2 1/9] Input: sun4i-ts: Add thermal zone sensor support

Dmitry Torokhov dmitry.torokhov at gmail.com
Fri Jan 9 10:42:57 PST 2015


On Fri, Jan 09, 2015 at 02:33:15PM -0400, Eduardo Valentin wrote:
> Dmitry,
> 
> On Fri, Jan 09, 2015 at 09:23:18AM -0800, Dmitry Torokhov wrote:
> > On Fri, Jan 09, 2015 at 06:17:48PM +0800, Chen-Yu Tsai wrote:
> > > The touchscreen controller has a temperature sensor embedded in the SoC,
> > > which already has hwmon support in the driver.
> > > 
> > > Add DT thermal zone support so we can use it with cpufreq for thermal
> > > throttling.
> > > 
> > > This also adds a comment stating that we do not know the actual formula
> > > for calculating the temperature.
> > > 
> > > Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> > > ---
> > 
> > 
> >   CC [M]  drivers/input/touchscreen/sun4i-ts.o
> > drivers/input/touchscreen/sun4i-ts.c:208:15: error: variable
> > ‘sun4i_ts_tz_ops’ has initializer but incomplete type
> >  static struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
> >                ^
> > drivers/input/touchscreen/sun4i-ts.c:209:2: error: unknown field
> > ‘get_temp’ specified in initializer
> >   .get_temp = get_temp,
> >   ^
> > drivers/input/touchscreen/sun4i-ts.c:209:2: warning: excess elements in
> > struct initializer [enabled by default]
> > drivers/input/touchscreen/sun4i-ts.c:209:2: warning: (near
> > initialization for ‘sun4i_ts_tz_ops’) [enabled by default]
> > drivers/input/touchscreen/sun4i-ts.c: In function ‘sun4i_ts_probe’:
> > drivers/input/touchscreen/sun4i-ts.c:331:8: warning: passing argument 4
> > of ‘thermal_zone_of_sensor_register’ from incompatible pointer type
> > [enabled by default]
> >         &sun4i_ts_tz_ops);
> >         ^
> > In file included from drivers/input/touchscreen/sun4i-ts.c:37:0:
> > include/linux/thermal.h:302:1: note: expected ‘int (*)(void *, long int
> > *)’ but argument is of type ‘struct thermal_zone_of_device_ops *’
> >  thermal_zone_of_sensor_register(struct device *dev, int id,
> >  ^
> > drivers/input/touchscreen/sun4i-ts.c:331:8: error: too few arguments to
> > function ‘thermal_zone_of_sensor_register’
> >         &sun4i_ts_tz_ops);
> >         ^
> > In file included from drivers/input/touchscreen/sun4i-ts.c:37:0:
> > include/linux/thermal.h:302:1: note: declared here
> >  thermal_zone_of_sensor_register(struct device *dev, int id,
> >  ^
> > make[1]: *** [drivers/input/touchscreen/sun4i-ts.o] Error 1
> > make: *** [drivers/input/touchscreen/sun4i-ts.o] Error 2
> > 
> 
> What kernel version are you using?
> 
> It looks like you are missing the of thermal ops commit.

Ah, OK, I have not uprevved my branches with 3.19 stuff yet.

-- 
Dmitry



More information about the linux-arm-kernel mailing list