[PATCH v2 1/9] Input: sun4i-ts: Add thermal zone sensor support
Eduardo Valentin
edubezval at gmail.com
Fri Jan 9 10:33:15 PST 2015
Dmitry,
On Fri, Jan 09, 2015 at 09:23:18AM -0800, Dmitry Torokhov wrote:
> On Fri, Jan 09, 2015 at 06:17:48PM +0800, Chen-Yu Tsai wrote:
> > The touchscreen controller has a temperature sensor embedded in the SoC,
> > which already has hwmon support in the driver.
> >
> > Add DT thermal zone support so we can use it with cpufreq for thermal
> > throttling.
> >
> > This also adds a comment stating that we do not know the actual formula
> > for calculating the temperature.
> >
> > Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> > ---
>
>
> CC [M] drivers/input/touchscreen/sun4i-ts.o
> drivers/input/touchscreen/sun4i-ts.c:208:15: error: variable
> ‘sun4i_ts_tz_ops’ has initializer but incomplete type
> static struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
> ^
> drivers/input/touchscreen/sun4i-ts.c:209:2: error: unknown field
> ‘get_temp’ specified in initializer
> .get_temp = get_temp,
> ^
> drivers/input/touchscreen/sun4i-ts.c:209:2: warning: excess elements in
> struct initializer [enabled by default]
> drivers/input/touchscreen/sun4i-ts.c:209:2: warning: (near
> initialization for ‘sun4i_ts_tz_ops’) [enabled by default]
> drivers/input/touchscreen/sun4i-ts.c: In function ‘sun4i_ts_probe’:
> drivers/input/touchscreen/sun4i-ts.c:331:8: warning: passing argument 4
> of ‘thermal_zone_of_sensor_register’ from incompatible pointer type
> [enabled by default]
> &sun4i_ts_tz_ops);
> ^
> In file included from drivers/input/touchscreen/sun4i-ts.c:37:0:
> include/linux/thermal.h:302:1: note: expected ‘int (*)(void *, long int
> *)’ but argument is of type ‘struct thermal_zone_of_device_ops *’
> thermal_zone_of_sensor_register(struct device *dev, int id,
> ^
> drivers/input/touchscreen/sun4i-ts.c:331:8: error: too few arguments to
> function ‘thermal_zone_of_sensor_register’
> &sun4i_ts_tz_ops);
> ^
> In file included from drivers/input/touchscreen/sun4i-ts.c:37:0:
> include/linux/thermal.h:302:1: note: declared here
> thermal_zone_of_sensor_register(struct device *dev, int id,
> ^
> make[1]: *** [drivers/input/touchscreen/sun4i-ts.o] Error 1
> make: *** [drivers/input/touchscreen/sun4i-ts.o] Error 2
>
What kernel version are you using?
It looks like you are missing the of thermal ops commit.
> >
> > changes since v1:
> >
> > - clean up thermal zone sensor when input device register fails
> > - unconditionally unregister thermal zone sensor on removal.
> > the unregister function checks the pointers passed in.
> > - add comment explaining the lack of documents for the temperature
> > calculation formula
> >
> > ---
> > .../bindings/input/touchscreen/sun4i.txt | 2 +
> > drivers/input/touchscreen/sun4i-ts.c | 47 ++++++++++++++++++++++
> > 2 files changed, 49 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
> > index aef57791f40b..a8405bab6c00 100644
> > --- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
> > +++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
> > @@ -5,6 +5,7 @@ Required properties:
> > - compatible: "allwinner,sun4i-a10-ts"
> > - reg: mmio address range of the chip
> > - interrupts: interrupt to which the chip is connected
> > + - #thermal-sensor-cells: shall be 0
> >
> > Optional properties:
> > - allwinner,ts-attached: boolean indicating that an actual touchscreen is
> > @@ -17,4 +18,5 @@ Example:
> > reg = <0x01c25000 0x100>;
> > interrupts = <29>;
> > allwinner,ts-attached;
> > + #thermal-sensor-cells = <0>;
> > };
> > diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
> > index 28a06749ae42..aac49db0b09d 100644
> > --- a/drivers/input/touchscreen/sun4i-ts.c
> > +++ b/drivers/input/touchscreen/sun4i-ts.c
> > @@ -34,6 +34,7 @@
> >
> > #include <linux/err.h>
> > #include <linux/hwmon.h>
> > +#include <linux/thermal.h>
> > #include <linux/init.h>
> > #include <linux/input.h>
> > #include <linux/interrupt.h>
> > @@ -107,6 +108,7 @@
> > struct sun4i_ts_data {
> > struct device *dev;
> > struct input_dev *input;
> > + struct thermal_zone_device *tz;
> > void __iomem *base;
> > unsigned int irq;
> > bool ignore_fifo_data;
> > @@ -180,6 +182,33 @@ static void sun4i_ts_close(struct input_dev *dev)
> > writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
> > }
> >
> > +static int get_temp(void *data, long *temp)
> > +{
> > + struct sun4i_ts_data *ts = data;
> > +
> > + /* No temp_data until the first irq */
> > + if (ts->temp_data == -1)
> > + return -EAGAIN;
> > +
> > + /*
> > + * The user manuals do not contain the formula for calculating
> > + * the temperature. The formula used here is from the AXP209,
> > + * which is designed by X-Powers, an affiliate of Allwinner:
> > + *
> > + * temperature = -144.7 + (value * 0.1)
> > + *
> > + * This should be replaced with the correct one if such information
> > + * becomes available.
> > + */
> > + *temp = (ts->temp_data - 1447) * 100;
> > +
> > + return 0;
> > +}
> > +
> > +static struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
> > + .get_temp = get_temp,
> > +};
> > +
> > static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
> > char *buf)
> > {
> > @@ -189,6 +218,16 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
> > if (ts->temp_data == -1)
> > return -EAGAIN;
> >
> > + /*
> > + * The user manuals do not contain the formula for calculating
> > + * the temperature. The formula used here is from the AXP209,
> > + * which is designed by X-Powers, an affiliate of Allwinner:
> > + *
> > + * temperature = -144.7 + (value * 0.1)
> > + *
> > + * This should be replaced with the correct one if such information
> > + * becomes available.
> > + */
> > return sprintf(buf, "%d\n", (ts->temp_data - 1447) * 100);
>
> Why duplicate it here, instead of doing:
>
> static int sun4i_get_temp(struct sun4i_ts_data *ts, int *temp)
> {
> if (ts->temp_data == -1)
> return -EAGAIN;
>
> /* comment */
> *temp = (ts->temp_data - 1447) * 100);
>
> return 0;
> }
>
> static int sun4i_tz_get_temp(void *data, long *temp)
> {
> return sun4i_get_temp(data, temp);
> }
>
> static ssize_t sun4i_show_temp(...)
> {
> error = sun4i_get_temp(ts, &temp);
> if (error)
> return error;
>
> return sprintf(buf, "%d\n", temp);
> }
>
> Also, thermal core seems to allow creating hwmon devices for thermal
> zones, can we use this feature?
>
> Thanks.
>
> --
> Dmitry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150109/832619b8/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list