[PATCH 2/4] clk: samsung: exynos7: add clocks for SPI block

Vivek Gautam gautamvivek1987 at gmail.com
Fri Jan 9 03:48:45 PST 2015


Hi Padma,


On Fri, Dec 19, 2014 at 6:53 PM, Padmavathi Venna <padma.v at samsung.com> wrote:
> Add clock support for 5 SPI channels.
>
> Signed-off-by: Padmavathi Venna <padma.v at samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos7.c       |   73 +++++++++++++++++++++++++++++++
>  include/dt-bindings/clock/exynos7-clk.h |   22 ++++++++-
>  2 files changed, 93 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
> index 954f9a0..cf5e50e 100644
> --- a/drivers/clk/samsung/clk-exynos7.c
> +++ b/drivers/clk/samsung/clk-exynos7.c
> @@ -166,9 +166,15 @@ CLK_OF_DECLARE(exynos7_clk_topc, "samsung,exynos7-clock-topc",
>  #define MUX_SEL_TOP00                  0x0200
>  #define MUX_SEL_TOP01                  0x0204
>  #define MUX_SEL_TOP03                  0x020C
> +#define MUX_SEL_TOP0_PERIC1            0x0234
> +#define MUX_SEL_TOP0_PERIC2            0x0238
>  #define MUX_SEL_TOP0_PERIC3            0x023C
>  #define DIV_TOP03                      0x060C
> +#define DIV_TOP0_PERIC1                        0x0634
> +#define DIV_TOP0_PERIC2                        0x0638
>  #define DIV_TOP0_PERIC3                        0x063C
> +#define ENABLE_SCLK_TOP0_PERIC1                0x0A34
> +#define ENABLE_SCLK_TOP0_PERIC2                0x0A38
>  #define ENABLE_SCLK_TOP0_PERIC3                0x0A3C
>
>  /* List of parent clocks for Muxes in CMU_TOP0 */
> @@ -194,9 +200,15 @@ static unsigned long top0_clk_regs[] __initdata = {
>         MUX_SEL_TOP00,
>         MUX_SEL_TOP01,
>         MUX_SEL_TOP03,
> +       MUX_SEL_TOP0_PERIC1,
> +       MUX_SEL_TOP0_PERIC2,
>         MUX_SEL_TOP0_PERIC3,
>         DIV_TOP03,
> +       DIV_TOP0_PERIC1,
> +       DIV_TOP0_PERIC2,
>         DIV_TOP0_PERIC3,
> +       ENABLE_SCLK_TOP0_PERIC1,
> +       ENABLE_SCLK_TOP0_PERIC2,
>         ENABLE_SCLK_TOP0_PERIC3,
>  };
>
> @@ -218,10 +230,16 @@ static struct samsung_mux_clock top0_mux_clks[] __initdata = {
>         MUX(0, "mout_aclk_peric1_66", mout_top0_group1, MUX_SEL_TOP03, 12, 2),
>         MUX(0, "mout_aclk_peric0_66", mout_top0_group1, MUX_SEL_TOP03, 20, 2),
>
> +       MUX(0, "mout_sclk_spi1", mout_top0_group1, MUX_SEL_TOP0_PERIC1, 8, 2),
> +       MUX(0, "mout_sclk_spi0", mout_top0_group1, MUX_SEL_TOP0_PERIC1, 20, 2),
> +
> +       MUX(0, "mout_sclk_spi3", mout_top0_group1, MUX_SEL_TOP0_PERIC2, 8, 2),
> +       MUX(0, "mout_sclk_spi2", mout_top0_group1, MUX_SEL_TOP0_PERIC2, 20, 2),
>         MUX(0, "mout_sclk_uart3", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 4, 2),
>         MUX(0, "mout_sclk_uart2", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 8, 2),
>         MUX(0, "mout_sclk_uart1", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 12, 2),
>         MUX(0, "mout_sclk_uart0", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 16, 2),
> +       MUX(0, "mout_sclk_spi4", mout_top0_group1, MUX_SEL_TOP0_PERIC3, 20, 2),
>  };
>
>  static struct samsung_div_clock top0_div_clks[] __initdata = {
> @@ -230,13 +248,29 @@ static struct samsung_div_clock top0_div_clks[] __initdata = {
>         DIV(DOUT_ACLK_PERIC0, "dout_aclk_peric0_66", "mout_aclk_peric0_66",
>                 DIV_TOP03, 20, 6),
>
> +       DIV(0, "dout_sclk_spi1", "mout_sclk_spi1", DIV_TOP0_PERIC1, 8, 12),
> +       DIV(0, "dout_sclk_spi0", "mout_sclk_spi0", DIV_TOP0_PERIC1, 20, 12),
> +
> +       DIV(0, "dout_sclk_spi3", "mout_sclk_spi3", DIV_TOP0_PERIC2, 8, 12),
> +       DIV(0, "dout_sclk_spi2", "mout_sclk_spi2", DIV_TOP0_PERIC2, 20, 12),
> +
>         DIV(0, "dout_sclk_uart3", "mout_sclk_uart3", DIV_TOP0_PERIC3, 4, 4),
>         DIV(0, "dout_sclk_uart2", "mout_sclk_uart2", DIV_TOP0_PERIC3, 8, 4),
>         DIV(0, "dout_sclk_uart1", "mout_sclk_uart1", DIV_TOP0_PERIC3, 12, 4),
>         DIV(0, "dout_sclk_uart0", "mout_sclk_uart0", DIV_TOP0_PERIC3, 16, 4),
> +       DIV(0, "dout_sclk_spi4", "mout_sclk_spi4", DIV_TOP0_PERIC3, 20, 12),
>  };
>
>  static struct samsung_gate_clock top0_gate_clks[] __initdata = {
> +       GATE(CLK_SCLK_SPI1, "sclk_spi1", "dout_sclk_spi1",
> +               ENABLE_SCLK_TOP0_PERIC1, 8, CLK_SET_RATE_PARENT, 0),
> +       GATE(CLK_SCLK_SPI0, "sclk_spi0", "dout_sclk_spi0",
> +               ENABLE_SCLK_TOP0_PERIC1, 20, CLK_SET_RATE_PARENT, 0),
> +
> +       GATE(CLK_SCLK_SPI3, "sclk_spi3", "dout_sclk_spi3",
> +               ENABLE_SCLK_TOP0_PERIC2, 8, CLK_SET_RATE_PARENT, 0),
> +       GATE(CLK_SCLK_SPI2, "sclk_spi2", "dout_sclk_spi2",
> +               ENABLE_SCLK_TOP0_PERIC2, 20, CLK_SET_RATE_PARENT, 0),
>         GATE(CLK_SCLK_UART3, "sclk_uart3", "dout_sclk_uart3",
>                 ENABLE_SCLK_TOP0_PERIC3, 4, 0, 0),
>         GATE(CLK_SCLK_UART2, "sclk_uart2", "dout_sclk_uart2",
> @@ -245,6 +279,8 @@ static struct samsung_gate_clock top0_gate_clks[] __initdata = {
>                 ENABLE_SCLK_TOP0_PERIC3, 12, 0, 0),
>         GATE(CLK_SCLK_UART0, "sclk_uart0", "dout_sclk_uart0",
>                 ENABLE_SCLK_TOP0_PERIC3, 16, 0, 0),
> +       GATE(CLK_SCLK_SPI4, "sclk_spi4", "dout_sclk_spi4",
> +               ENABLE_SCLK_TOP0_PERIC3, 20, CLK_SET_RATE_PARENT, 0),
>  };
>
>  static struct samsung_fixed_factor_clock top0_fixed_factor_clks[] __initdata = {
> @@ -520,6 +556,7 @@ static void __init exynos7_clk_peric0_init(struct device_node *np)
>  /* Register Offset definitions for CMU_PERIC1 (0x14C80000) */
>  #define MUX_SEL_PERIC10                        0x0200
>  #define MUX_SEL_PERIC11                        0x0204
> +#define MUX_SEL_PERIC12                        0x0208
>  #define ENABLE_PCLK_PERIC1             0x0900
>  #define ENABLE_SCLK_PERIC10            0x0A00
>
> @@ -531,10 +568,16 @@ PNAME(mout_aclk_peric1_66_p)      = { "fin_pll", "dout_aclk_peric1_66" };
>  PNAME(mout_sclk_uart1_p)       = { "fin_pll", "sclk_uart1" };
>  PNAME(mout_sclk_uart2_p)       = { "fin_pll", "sclk_uart2" };
>  PNAME(mout_sclk_uart3_p)       = { "fin_pll", "sclk_uart3" };
> +PNAME(mout_sclk_spi0_p)                = { "fin_pll", "sclk_spi0" };
> +PNAME(mout_sclk_spi1_p)                = { "fin_pll", "sclk_spi1" };
> +PNAME(mout_sclk_spi2_p)                = { "fin_pll", "sclk_spi2" };
> +PNAME(mout_sclk_spi3_p)                = { "fin_pll", "sclk_spi3" };
> +PNAME(mout_sclk_spi4_p)                = { "fin_pll", "sclk_spi4" };
>
>  static unsigned long peric1_clk_regs[] __initdata = {
>         MUX_SEL_PERIC10,
>         MUX_SEL_PERIC11,
> +       MUX_SEL_PERIC12,
>         ENABLE_PCLK_PERIC1,
>         ENABLE_SCLK_PERIC10,
>  };
> @@ -543,6 +586,16 @@ static struct samsung_mux_clock peric1_mux_clks[] __initdata = {
>         MUX(0, "mout_aclk_peric1_66_user", mout_aclk_peric1_66_p,
>                 MUX_SEL_PERIC10, 0, 1),
>
> +       MUX_F(0, "mout_sclk_spi0_user", mout_sclk_spi0_p,
> +               MUX_SEL_PERIC11, 0, 1, CLK_SET_RATE_PARENT, 0),
> +       MUX_F(0, "mout_sclk_spi1_user", mout_sclk_spi1_p,
> +               MUX_SEL_PERIC11, 4, 1, CLK_SET_RATE_PARENT, 0),
> +       MUX_F(0, "mout_sclk_spi2_user", mout_sclk_spi2_p,
> +               MUX_SEL_PERIC11, 8, 1, CLK_SET_RATE_PARENT, 0),
> +       MUX_F(0, "mout_sclk_spi3_user", mout_sclk_spi3_p,
> +               MUX_SEL_PERIC11, 12, 1, CLK_SET_RATE_PARENT, 0),
> +       MUX_F(0, "mout_sclk_spi4_user", mout_sclk_spi4_p,
> +               MUX_SEL_PERIC11, 16, 1, CLK_SET_RATE_PARENT, 0),
>         MUX(0, "mout_sclk_uart1_user", mout_sclk_uart1_p,
>                 MUX_SEL_PERIC11, 20, 1),
>         MUX(0, "mout_sclk_uart2_user", mout_sclk_uart2_p,
> @@ -568,6 +621,16 @@ static struct samsung_gate_clock peric1_gate_clks[] __initdata = {
>                 ENABLE_PCLK_PERIC1, 10, 0, 0),
>         GATE(PCLK_UART3, "pclk_uart3", "mout_aclk_peric1_66_user",
>                 ENABLE_PCLK_PERIC1, 11, 0, 0),
> +       GATE(PCLK_SPI0, "pclk_spi0", "mout_aclk_peric1_66_user",
> +               ENABLE_PCLK_PERIC1, 12, 0, 0),
> +       GATE(PCLK_SPI1, "pclk_spi1", "mout_aclk_peric1_66_user",
> +               ENABLE_PCLK_PERIC1, 13, 0, 0),
> +       GATE(PCLK_SPI2, "pclk_spi2", "mout_aclk_peric1_66_user",
> +               ENABLE_PCLK_PERIC1, 14, 0, 0),
> +       GATE(PCLK_SPI3, "pclk_spi3", "mout_aclk_peric1_66_user",
> +               ENABLE_PCLK_PERIC1, 15, 0, 0),
> +       GATE(PCLK_SPI4, "pclk_spi4", "mout_aclk_peric1_66_user",
> +               ENABLE_PCLK_PERIC1, 16, 0, 0),
>
>         GATE(SCLK_UART1, "sclk_uart1_user", "mout_sclk_uart1_user",
>                 ENABLE_SCLK_PERIC10, 9, 0, 0),
> @@ -575,6 +638,16 @@ static struct samsung_gate_clock peric1_gate_clks[] __initdata = {
>                 ENABLE_SCLK_PERIC10, 10, 0, 0),
>         GATE(SCLK_UART3, "sclk_uart3_user", "mout_sclk_uart3_user",
>                 ENABLE_SCLK_PERIC10, 11, 0, 0),
> +       GATE(SCLK_SPI0, "sclk_spi0_user", "mout_sclk_spi0_user",
> +               ENABLE_SCLK_PERIC10, 12, CLK_SET_RATE_PARENT, 0),
> +       GATE(SCLK_SPI1, "sclk_spi1_user", "mout_sclk_spi1_user",
> +               ENABLE_SCLK_PERIC10, 13, CLK_SET_RATE_PARENT, 0),
> +       GATE(SCLK_SPI2, "sclk_spi2_user", "mout_sclk_spi2_user",
> +               ENABLE_SCLK_PERIC10, 14, CLK_SET_RATE_PARENT, 0),
> +       GATE(SCLK_SPI3, "sclk_spi3_user", "mout_sclk_spi3_user",
> +               ENABLE_SCLK_PERIC10, 15, CLK_SET_RATE_PARENT, 0),
> +       GATE(SCLK_SPI4, "sclk_spi4_user", "mout_sclk_spi4_user",
> +               ENABLE_SCLK_PERIC10, 16, CLK_SET_RATE_PARENT, 0),
>  };
>
>  static struct samsung_cmu_info peric1_cmu_info __initdata = {
> diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
> index a6c4d8e..3bba9ec 100644
> --- a/include/dt-bindings/clock/exynos7-clk.h
> +++ b/include/dt-bindings/clock/exynos7-clk.h
> @@ -26,7 +26,13 @@
>  #define CLK_SCLK_UART1                 4
>  #define CLK_SCLK_UART2                 5
>  #define CLK_SCLK_UART3                 6
> -#define TOP0_NR_CLK                    7
> +#define CLK_SCLK_SPI0                  7
> +#define CLK_SCLK_SPI1                  8
> +#define CLK_SCLK_SPI2                  9
> +#define CLK_SCLK_SPI3                  10
> +#define CLK_SCLK_SPI4                  11
> +#define CLK_SCLK_SPI5                  12

I don't see this CLK_SCLK_SPI5 being used anywhere in the patch.
Possibly you didn't want to add it here.

> +#define TOP0_NR_CLK                    13
>
>  /* TOP1 */
>  #define DOUT_ACLK_FSYS1_200            1
> @@ -70,7 +76,19 @@
>  #define PCLK_HSI2C6                    9
>  #define PCLK_HSI2C7                    10
>  #define PCLK_HSI2C8                    11
> -#define PERIC1_NR_CLK                  12
> +#define PCLK_SPI0                      12
> +#define PCLK_SPI1                      13
> +#define PCLK_SPI2                      14
> +#define PCLK_SPI3                      15
> +#define PCLK_SPI4                      16
> +#define PCLK_SPI5                      17
> +#define SCLK_SPI0                      18
> +#define SCLK_SPI1                      19
> +#define SCLK_SPI2                      20
> +#define SCLK_SPI3                      21
> +#define SCLK_SPI4                      22
> +#define SCLK_SPI5                      23

Same here for SCLK_SPI5, unused in the patch.

[snip]

The rest all looks good in this patch. I have also verified from the Exynos7 UM.


-- 
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India



More information about the linux-arm-kernel mailing list