[PATCH 1/2] ARM: shmobile: emev2 dtsi: Add PFC information

[Geert Uytterhoeven]

From: Niklas Söderlund <niso at kth.se>

With this information all GPIOs can make use of the PFC functionality.

Signed-off-by: Niklas Söderlund <niso at kth.se>
Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
 arch/arm/boot/dts/emev2.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index cc7bfe0ba40af9a9..bb45694d91bc1e6c 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -169,12 +169,18 @@
 		clock-names = "sclk";
 	};
 
+	pfc: pfc at e0140200 {
+		compatible = "renesas,pfc-emev2";
+		reg = <0xe0140200 0x100>;
+	};
+
 	gpio0: gpio at e0050000 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
 		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 0 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -186,6 +192,7 @@
 		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 32 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -197,6 +204,7 @@
 		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 64 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -208,6 +216,7 @@
 		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 96 32>;
 		#gpio-cells = <2>;
 		ngpios = <32>;
 		interrupt-controller;
@@ -219,6 +228,7 @@
 		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
 			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
+		gpio-ranges = <&pfc 0 128 31>;
 		#gpio-cells = <2>;
 		ngpios = <31>;
 		interrupt-controller;
-- 
1.9.1