[PATCH 2/2] ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1

[Geert Uytterhoeven]

From: Niklas Söderlund <niso at kth.se>

Configure the pinmux on kzm9d to use the serial connector for uart1.

Signed-off-by: Niklas Söderlund <niso at kth.se>
Acked-by: Linus Walleij <linus.walleij at linaro.org>
Acked-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
---
 arch/arm/boot/dts/emev2-kzm9d.dts | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 667d323e80a3e176..19446273e4a7f832 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -94,3 +94,16 @@
 		vdd33a-supply = <&reg_3p3v>;
 	};
 };
+
+&pfc {
+	uart1_pins: uart at e1030000 {
+		renesas,groups = "uart1_ctrl", "uart1_data";
+		renesas,function = "uart1";
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
-- 
1.9.1