[1/4] clk: samsung: exynos3250: Add UART2 clock
Pankaj Dubey
pankaj.dubey at samsung.com
Sun Aug 16 20:29:38 PDT 2015
Hi Chanwoo,
Thanks for this patch. Similar patch[1] was posted long back, and there
were some concern from your side, if you think those concerns are fixed,
then my patch [1] are still valid and can be taken. If it needs to be
rebase I am happy to do that.
[1]
http://lists.infradead.org/pipermail/linux-arm-kernel/2014-September/291239.html
Thanks,
Pankaj Dubey
On Tuesday 11 August 2015 09:16 AM, Chanwoo Choi wrote:
> This patch add the UART2 clocks (mux, divider, gate) of Exynos3250 SoC.
>
> Cc: Sylwester Nawrocki <s.nawrocki at samsung.com>
> Cc: Tomasz Figa <tomasz.figa at gmail.com>
> Signed-off-by: Chanwoo Choi <cw00.choi at samsung.com>
> Reviewed-by: Krzysztof Kozlowski <k.kozlowski at samsung.com>
>
> ---
> drivers/clk/samsung/clk-exynos3250.c | 6 ++++++
> include/dt-bindings/clock/exynos3250.h | 6 +++++-
> 2 files changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
> index 538de66a759e..2105863a3ace 100644
> --- a/drivers/clk/samsung/clk-exynos3250.c
> +++ b/drivers/clk/samsung/clk-exynos3250.c
> @@ -307,6 +307,7 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
> MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 4),
>
> /* SRC_PERIL0 */
> + MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8, 4),
> MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
> MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
>
> @@ -389,6 +390,7 @@ static struct samsung_div_clock div_clks[] __initdata = {
> DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
>
> /* DIV_PERIL0 */
> + DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
> DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
> DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
>
> @@ -551,6 +553,9 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
> GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
> GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
> +
> + GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
> + GATE_SCLK_PERIL, 2, CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
> GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
> GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
> @@ -648,6 +653,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
> GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
> GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
> GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
> + GATE(CLK_UART2, "uart2", "div_aclk_100", GATE_IP_PERIL, 2, 0, 0),
> GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
> GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
> };
> diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
> index aab088d30199..89a7d97b002c 100644
> --- a/include/dt-bindings/clock/exynos3250.h
> +++ b/include/dt-bindings/clock/exynos3250.h
> @@ -78,6 +78,7 @@
> #define CLK_MOUT_CORE 58
> #define CLK_MOUT_APLL 59
> #define CLK_MOUT_ACLK_266_SUB 60
> +#define CLK_MOUT_UART2 61
>
> /* Dividers */
> #define CLK_DIV_GPL 64
> @@ -126,6 +127,7 @@
> #define CLK_DIV_CORE 107
> #define CLK_DIV_HPM 108
> #define CLK_DIV_COPY 109
> +#define CLK_DIV_UART2 110
>
> /* Gates */
> #define CLK_ASYNC_G3D 128
> @@ -222,6 +224,7 @@
> #define CLK_BLOCK_MFC 219
> #define CLK_BLOCK_CAM 220
> #define CLK_SMIES 221
> +#define CLK_UART2 222
>
> /* Special clocks */
> #define CLK_SCLK_JPEG 224
> @@ -248,12 +251,13 @@
> #define CLK_SCLK_SPI0 245
> #define CLK_SCLK_UART1 246
> #define CLK_SCLK_UART0 247
> +#define CLK_SCLK_UART2 248
>
> /*
> * Total number of clocks of main CMU.
> * NOTE: Must be equal to last clock ID increased by one.
> */
> -#define CLK_NR_CLKS 248
> +#define CLK_NR_CLKS 249
>
> /*
> * CMU DMC
>
More information about the linux-arm-kernel
mailing list