[PATCH 1/2] clk: samsung: exynos3250: add uart2/3 related clocks

[Chanwoo Choi]

Hi Pankaj,

On 09/27/2014 01:58 PM, Pankaj Dubey wrote:
> Exynos3250 has four UART channels UART0,1,2 and 3. This patch adds
> missing clock entries for UART2 and UART3.
> 
> CC: Mike Turquette <mturquette at linaro.org>
> CC: Sylwester Nawrocki <s.nawrocki at samsung.com>
> Signed-off-by: Pankaj Dubey <pankaj.dubey at samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos3250.c   |   11 +++++++++++
>  include/dt-bindings/clock/exynos3250.h |   10 +++++++++-
>  2 files changed, 20 insertions(+), 1 deletion(-)

Exynos3250 has only two UART(0,1) port. Exynos3250 don't support UART 2,3.

Thanks,
Chanwoo Choi

> 
> diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
> index dc85f8e..0722fef 100644
> --- a/drivers/clk/samsung/clk-exynos3250.c
> +++ b/drivers/clk/samsung/clk-exynos3250.c
> @@ -357,6 +357,8 @@ static struct samsung_mux_clock mux_clks[] __initdata = {
>  	MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3),
>  
>  	/* SRC_PERIL0 */
> +	MUX(CLK_MOUT_UART3, "mout_uart3", group_sclk_p, SRC_PERIL0, 12, 4),
> +	MUX(CLK_MOUT_UART2, "mout_uart2", group_sclk_p, SRC_PERIL0, 8, 4),
>  	MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
>  	MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
>  
> @@ -439,6 +441,8 @@ static struct samsung_div_clock div_clks[] __initdata = {
>  	DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
>  
>  	/* DIV_PERIL0 */
> +	DIV(CLK_DIV_UART3, "div_uart3", "mout_uart3", DIV_PERIL0, 12, 4),
> +	DIV(CLK_DIV_UART2, "div_uart2", "mout_uart2", DIV_PERIL0, 8, 4),
>  	DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
>  	DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
>  
> @@ -601,6 +605,10 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>  		GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
>  		GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
> +	GATE(CLK_SCLK_UART3, "sclk_uart3", "div_uart3",
> +		GATE_SCLK_PERIL, 3, CLK_SET_RATE_PARENT, 0),
> +	GATE(CLK_SCLK_UART2, "sclk_uart2", "div_uart2",
> +		GATE_SCLK_PERIL, 2, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
>  		GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
>  	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
> @@ -679,6 +687,7 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>  	GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
>  	GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
>  	GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
> +	GATE(CLK_SDMMC2, "sdmmc2", "div_aclk_200", GATE_IP_FSYS, 7, 0, 0),
>  	GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
>  	GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
>  	GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
> @@ -698,6 +707,8 @@ static struct samsung_gate_clock gate_clks[] __initdata = {
>  	GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
>  	GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
>  	GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
> +	GATE(CLK_UART3, "uart3", "div_aclk_100", GATE_IP_PERIL, 3, 0, 0),
> +	GATE(CLK_UART2, "uart2", "div_aclk_100", GATE_IP_PERIL, 2, 0, 0),
>  	GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
>  	GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
>  };
> diff --git a/include/dt-bindings/clock/exynos3250.h b/include/dt-bindings/clock/exynos3250.h
> index b535e9d..ffeb695 100644
> --- a/include/dt-bindings/clock/exynos3250.h
> +++ b/include/dt-bindings/clock/exynos3250.h
> @@ -78,6 +78,8 @@
>  #define CLK_MOUT_CORE			58
>  #define CLK_MOUT_APLL			59
>  #define CLK_MOUT_ACLK_266_SUB		60
> +#define CLK_MOUT_UART2			61
> +#define CLK_MOUT_UART3			62
>  
>  /* Dividers */
>  #define CLK_DIV_GPL			64
> @@ -126,6 +128,8 @@
>  #define CLK_DIV_CORE			107
>  #define CLK_DIV_HPM			108
>  #define CLK_DIV_COPY			109
> +#define CLK_DIV_UART2			110
> +#define CLK_DIV_UART3			111
>  
>  /* Gates */
>  #define CLK_ASYNC_G3D			128
> @@ -222,6 +226,8 @@
>  #define CLK_BLOCK_MFC			219
>  #define CLK_BLOCK_CAM			220
>  #define CLK_SMIES			221
> +#define CLK_UART2			222
> +#define CLK_UART3			223
>  
>  /* Special clocks */
>  #define CLK_SCLK_JPEG			224
> @@ -248,11 +254,13 @@
>  #define CLK_SCLK_SPI0			245
>  #define CLK_SCLK_UART1			246
>  #define CLK_SCLK_UART0			247
> +#define CLK_SCLK_UART2			248
> +#define CLK_SCLK_UART3			249
>  
>  /*
>   * Total number of clocks of main CMU.
>   * NOTE: Must be equal to last clock ID increased by one.
>   */
> -#define CLK_NR_CLKS			248
> +#define CLK_NR_CLKS			250
>  
>  #endif /* _DT_BINDINGS_CLOCK_SAMSUNG_EXYNOS3250_CLOCK_H */
>