[PATCH v6 1/6] PCI: designware: move calculation of bus addresses to DRA7xx

[Zhou Wang]

[+cc jingoohan1 at gmail.com]

On 2015/8/6 16:09, Zhou Wang wrote:
> From: gabriele paoloni <gabriele.paoloni at huawei.com>
> 
> Commit f4c55c5a3f7f "PCI: designware: Program ATU with untranslated
> address" added the calculation of PCI BUS addresses in designware,
> storing them in new fields added in "struct pcie_port". This
> calculation is done for every designware user even if is only
> applicable to DRA7xx.
> This patch moves the calculation of the bus addresses to the DRA7xx
> driver and is needed to allow the rework of designware to use
> the new DT parsing API.
> 
> Signed-off-by: Gabriele Paoloni <gabriele.paoloni at huawei.com>
> Signed-off-by: Zhou Wang <wangzhou1 at hisilicon.com>
> ---
>  drivers/pci/host/pci-dra7xx.c      | 13 +++++++++++++
>  drivers/pci/host/pcie-designware.c | 15 ++++-----------
>  2 files changed, 17 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c
> index 80db09e..18ae7ff 100644
> --- a/drivers/pci/host/pci-dra7xx.c
> +++ b/drivers/pci/host/pci-dra7xx.c
> @@ -61,6 +61,7 @@
>  
>  #define	PCIECTRL_DRA7XX_CONF_PHY_CS			0x010C
>  #define	LINK_UP						BIT(16)
> +#define	CPU_TO_BUS_ADDR					0x0FFFFFFF
>  
>  struct dra7xx_pcie {
>  	void __iomem		*base;
> @@ -139,6 +140,18 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp)
>  static void dra7xx_pcie_host_init(struct pcie_port *pp)
>  {
>  	dw_pcie_setup_rc(pp);
> +
> +	if (pp->io_mod_base)
> +		pp->io_mod_base &= CPU_TO_BUS_ADDR;
> +
> +	if (pp->mem_mod_base)
> +		pp->mem_mod_base &= CPU_TO_BUS_ADDR;
> +
> +	if (pp->cfg0_mod_base) {
> +		pp->cfg0_mod_base &= CPU_TO_BUS_ADDR;
> +		pp->cfg1_mod_base &= CPU_TO_BUS_ADDR;
> +	}
> +
>  	dra7xx_pcie_establish_link(pp);
>  	if (IS_ENABLED(CONFIG_PCI_MSI))
>  		dw_pcie_msi_init(pp);
> diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
> index 69486be..c5d407c 100644
> --- a/drivers/pci/host/pcie-designware.c
> +++ b/drivers/pci/host/pcie-designware.c
> @@ -366,14 +366,10 @@ int dw_pcie_host_init(struct pcie_port *pp)
>  	struct of_pci_range range;
>  	struct of_pci_range_parser parser;
>  	struct resource *cfg_res;
> -	u32 val, na, ns;
> +	u32 val, ns;
>  	const __be32 *addrp;
>  	int i, index, ret;
>  
> -	/* Find the address cell size and the number of cells in order to get
> -	 * the untranslated address.
> -	 */
> -	of_property_read_u32(np, "#address-cells", &na);
>  	ns = of_n_size_cells(np);
>  
>  	cfg_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "config");
> @@ -416,8 +412,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
>  			pp->io_base = range.cpu_addr;
>  
>  			/* Find the untranslated IO space address */
> -			pp->io_mod_base = of_read_number(parser.range -
> -							 parser.np + na, ns);
> +			pp->io_mod_base = range.cpu_addr;
>  		}
>  		if (restype == IORESOURCE_MEM) {
>  			of_pci_range_to_resource(&range, np, &pp->mem);
> @@ -426,8 +421,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
>  			pp->mem_bus_addr = range.pci_addr;
>  
>  			/* Find the untranslated MEM space address */
> -			pp->mem_mod_base = of_read_number(parser.range -
> -							  parser.np + na, ns);
> +			pp->mem_mod_base = range.cpu_addr;
>  		}
>  		if (restype == 0) {
>  			of_pci_range_to_resource(&range, np, &pp->cfg);
> @@ -437,8 +431,7 @@ int dw_pcie_host_init(struct pcie_port *pp)
>  			pp->cfg1_base = pp->cfg.start + pp->cfg0_size;
>  
>  			/* Find the untranslated configuration space address */
> -			pp->cfg0_mod_base = of_read_number(parser.range -
> -							   parser.np + na, ns);
> +			pp->cfg0_mod_base = range.cpu_addr;
>  			pp->cfg1_mod_base = pp->cfg0_mod_base +
>  					    pp->cfg0_size;
>  		}
>