[PATCH v2] ARM: dts: sunxi: Add regulators for LeMaker BananaPi

Maxime Ripard maxime.ripard at free-electrons.com
Mon Aug 3 02:47:23 PDT 2015


On Sun, Aug 02, 2015 at 06:18:25PM +0200, Timo Sigurdsson wrote:
> sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU
> driver, so add them to allow for voltage-scaling with cpufreq-dt.
> 
> Signed-off-by: Timo Sigurdsson <public_timo.s at silentcreek.de>
> ---
> Changes since v1 (RFC):
> 
> - Dropped the changes to the cpufreq operating points and renamed the patch
> accordingly
> - Limited the CPU voltage range so it doesn't exceed the SOC specifications
> ---
>  arch/arm/boot/dts/sun7i-a20-bananapi.dts | 35 ++++++++++++++++++++++++++++----
>  1 file changed, 31 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
> index 9f7b472..74382f3 100644
> --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
> +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
> @@ -92,6 +92,10 @@
>  	status = "okay";
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&reg_dcdc2>;
> +};
> +
>  &ehci0 {
>  	status = "okay";
>  };
> @@ -119,13 +123,9 @@
>  	status = "okay";
>  
>  	axp209: pmic at 34 {
> -		compatible = "x-powers,axp209";
>  		reg = <0x34>;
>  		interrupt-parent = <&nmi_intc>;
>  		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> -
> -		interrupt-controller;
> -		#interrupt-cells = <1>;
>  	};
>  };
>  
> @@ -182,6 +182,33 @@
>  	};
>  };
>  
> +#include "axp209.dtsi"
> +
> +&reg_dcdc2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1000000>;
> +	regulator-max-microvolt = <1400000>;
> +	regulator-name = "vdd-cpu";
> +};
> +
> +&reg_dcdc3 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <1000000>;
> +	regulator-max-microvolt = <1400000>;
> +	regulator-name = "vdd-int-dll";
> +};
> +
> +&reg_ldo1 {
> +	regulator-name = "vdd-rtc";
> +};
> +
> +&reg_ldo2 {
> +	regulator-always-on;
> +	regulator-min-microvolt = <3000000>;
> +	regulator-max-microvolt = <3000000>;
> +	regulator-name = "avcc";
> +};

What regulator provides the 3.3V regulator used in the rest of this DT
then (MMC, GMAC) ?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150803/fd1a3c05/attachment.sig>


More information about the linux-arm-kernel mailing list