[PATCH] ARM: imx53: Set DDR pins to high impedance when in suspend to RAM.
Martin Fuzzey
mfuzzey at parkeon.com
Tue Apr 28 08:44:58 PDT 2015
In order to save power the DDR pins should be put into high
impedance when in suspend to RAM.
This requires manually requesting self refresh (rather than using the
automatic mode implemented by the CCM / ESDCTL), followed by
reconfiguring the IOMUXC.
Of course the code to do this cannot itself run from DDR so the
code is copied to and executed from internal memory.
In my tests using a custom i.MX53 board with LPDDR2 RAM
this reduced the suspend power consumption from 200mW to 60mW.
Signed-off-by: Martin Fuzzey <mfuzzey at parkeon.com>
---
arch/arm/mach-imx/Makefile | 1
arch/arm/mach-imx/common.h | 4 +
arch/arm/mach-imx/pm-imx5.c | 205 +++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/suspend-imx53.S | 139 +++++++++++++++++++++++++
4 files changed, 348 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-imx/suspend-imx53.S
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index f5ac685..984bee2 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_SOC_IMX6SX) += clk-imx6sx.o mach-imx6sx.o
ifeq ($(CONFIG_SUSPEND),y)
AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
+obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
endif
obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index cfcdb62..0bd9d82 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -122,9 +122,13 @@ int imx_cpu_kill(unsigned int cpu);
#ifdef CONFIG_SUSPEND
void v7_cpu_resume(void);
+void imx53_suspend(void __iomem *ocram_vbase);
+extern const u32 imx53_suspend_sz;
void imx6_suspend(void __iomem *ocram_vbase);
#else
static inline void v7_cpu_resume(void) {}
+static inline void imx53_suspend(void __iomem *ocram_vbase) {}
+static const u32 imx53_suspend_sz;
static inline void imx6_suspend(void __iomem *ocram_vbase) {}
#endif
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index f1f80ab..9572f3b 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -13,7 +13,14 @@
#include <linux/io.h>
#include <linux/err.h>
#include <linux/export.h>
+
+#include <linux/genalloc.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/tlbflush.h>
@@ -49,9 +56,48 @@
*/
#define IMX5_DEFAULT_CPU_IDLE_STATE WAIT_UNCLOCKED_POWER_OFF
+struct imx5_suspend_io_config {
+ u32 offset;
+ u32 clear;
+ u32 set;
+};
+
struct imx5_pm_data {
phys_addr_t cortex_addr;
phys_addr_t gpc_addr;
+ phys_addr_t m4if_addr;
+ phys_addr_t iomuxc_addr;
+ void (*suspend_asm)(void __iomem *ocram_vbase);
+ const u32 *suspend_asm_sz;
+ const struct imx5_suspend_io_config *suspend_io_config;
+ int suspend_io_count;
+};
+
+static const struct imx5_suspend_io_config imx53_suspend_io_config[] = {
+#define MX53_DSE_HIGHZ_MASK (0x7 << 19)
+ {.offset = 0x584, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM0 */
+ {.offset = 0x594, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM1 */
+ {.offset = 0x560, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM2 */
+ {.offset = 0x554, .clear = MX53_DSE_HIGHZ_MASK}, /* DQM3 */
+ {.offset = 0x574, .clear = MX53_DSE_HIGHZ_MASK}, /* CAS */
+ {.offset = 0x588, .clear = MX53_DSE_HIGHZ_MASK}, /* RAS */
+ {.offset = 0x578, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_0 */
+ {.offset = 0x570, .clear = MX53_DSE_HIGHZ_MASK}, /* SDCLK_1 */
+
+ {.offset = 0x580, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT0 */
+ {.offset = 0x564, .clear = MX53_DSE_HIGHZ_MASK}, /* SDODT1 */
+ {.offset = 0x57c, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS0 */
+ {.offset = 0x590, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS1 */
+ {.offset = 0x568, .clear = MX53_DSE_HIGHZ_MASK}, /* SDQS2 */
+ {.offset = 0x558, .clear = MX53_DSE_HIGHZ_MASK}, /* SDSQ3 */
+ {.offset = 0x6f0, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_ADDS */
+ {.offset = 0x718, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_BODS */
+ {.offset = 0x71c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B1DS */
+ {.offset = 0x728, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B2DS */
+ {.offset = 0x72c, .clear = MX53_DSE_HIGHZ_MASK}, /* GRP_B3DS */
+
+ /* Controls the CKE signal which is required to leave self refresh */
+ {.offset = 0x720, .clear = MX53_DSE_HIGHZ_MASK, .set = 1 << 19}, /* CTLDS */
};
static const struct imx5_pm_data imx51_pm_data __initconst = {
@@ -62,11 +108,42 @@ static const struct imx5_pm_data imx51_pm_data __initconst = {
static const struct imx5_pm_data imx53_pm_data __initconst = {
.cortex_addr = 0x63fa0000,
.gpc_addr = 0x53fd8000,
+ .m4if_addr = 0x63fd8000,
+ .iomuxc_addr = 0x53fa8000,
+ .suspend_asm = &imx53_suspend,
+ .suspend_asm_sz = &imx53_suspend_sz,
+ .suspend_io_config = imx53_suspend_io_config,
+ .suspend_io_count = ARRAY_SIZE(imx53_suspend_io_config),
+};
+
+#define MX5_MAX_SUSPEND_IOCONFIG ARRAY_SIZE(imx53_suspend_io_config)
+
+struct imx5_suspend_io_state {
+ u32 offset;
+ u32 clear;
+ u32 set;
+ u32 saved_value;
};
+/*
+ * This structure is for passing necessary data for low level ocram
+ * suspend code(arch/arm/mach-imx/suspend-imx53.S), if this struct
+ * definition is changed, the offset definition in that file
+ * must be also changed accordingly otherwise, the suspend to ocram
+ * function will be broken!
+ */
+struct imx5_cpu_suspend_info {
+ void __iomem *m4if_base;
+ void __iomem *iomuxc_base;
+ u32 io_count;
+ struct imx5_suspend_io_state io_state[MX5_MAX_SUSPEND_IOCONFIG];
+} __aligned(8);
+
static void __iomem *ccm_base;
static void __iomem *cortex_base;
static void __iomem *gpc_base;
+static void __iomem *suspend_ocram_base;
+static void (*imx5_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
void __init imx5_pm_set_ccm_base(void __iomem *base)
{
@@ -161,8 +238,15 @@ static int mx5_suspend_enter(suspend_state_t state)
/*clear the EMPGC0/1 bits */
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC0_SRPGCR);
__raw_writel(0, gpc_base + MXC_SRPG_EMPGC1_SRPGCR);
+
+ if (imx5_suspend_in_ocram_fn)
+ imx5_suspend_in_ocram_fn(suspend_ocram_base);
+ else
+ cpu_do_idle();
+
+ } else {
+ cpu_do_idle();
}
- cpu_do_idle();
/* return registers to default idle state */
mx5_cpu_lp_set(IMX5_DEFAULT_CPU_IDLE_STATE);
@@ -194,6 +278,120 @@ static void imx5_pm_idle(void)
imx5_cpu_do_idle();
}
+static int __init imx_suspend_alloc_ocram(
+ size_t size,
+ void __iomem **virt_out,
+ phys_addr_t *phys_out)
+{
+ struct device_node *node;
+ struct platform_device *pdev;
+ struct gen_pool *ocram_pool;
+ unsigned long ocram_base;
+ void __iomem *virt;
+ phys_addr_t phys;
+ int ret = 0;
+
+ /* Copied from imx6: TODO factorize */
+ node = of_find_compatible_node(NULL, NULL, "mmio-sram");
+ if (!node) {
+ pr_warn("%s: failed to find ocram node!\n", __func__);
+ return -ENODEV;
+ }
+
+ pdev = of_find_device_by_node(node);
+ if (!pdev) {
+ pr_warn("%s: failed to find ocram device!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_pool = dev_get_gen_pool(&pdev->dev);
+ if (!ocram_pool) {
+ pr_warn("%s: ocram pool unavailable!\n", __func__);
+ ret = -ENODEV;
+ goto put_node;
+ }
+
+ ocram_base = gen_pool_alloc(ocram_pool, size);
+ if (!ocram_base) {
+ pr_warn("%s: unable to alloc ocram!\n", __func__);
+ ret = -ENOMEM;
+ goto put_node;
+ }
+
+ phys = gen_pool_virt_to_phys(ocram_pool, ocram_base);
+ virt = __arm_ioremap_exec(phys, size, false);
+ if (phys_out)
+ *phys_out = phys;
+ if (virt_out)
+ *virt_out = virt;
+
+put_node:
+ of_node_put(node);
+
+ return ret;
+}
+
+static int __init imx5_suspend_init(const struct imx5_pm_data *soc_data)
+{
+ struct imx5_cpu_suspend_info *suspend_info;
+ const struct imx5_suspend_io_config *io_config;
+ struct imx5_suspend_io_state *io_state;
+ int i;
+ int ret;
+ /* Need this to avoid compile error due to const typeof in fncpy.h */
+ void (*suspend_asm)(void __iomem *) = soc_data->suspend_asm;
+
+ if (!suspend_asm)
+ return 0;
+
+ if (!soc_data->suspend_asm_sz || !*soc_data->suspend_asm_sz)
+ return -EINVAL;
+
+ ret = imx_suspend_alloc_ocram(
+ *soc_data->suspend_asm_sz + sizeof(*suspend_info),
+ &suspend_ocram_base, NULL);
+ if (ret)
+ return ret;
+
+ suspend_info = suspend_ocram_base;
+
+ suspend_info->io_count = soc_data->suspend_io_count;
+ io_config = soc_data->suspend_io_config;
+ io_state = suspend_info->io_state;
+ for (i = 0; i < soc_data->suspend_io_count;
+ i++, io_config++, io_state++) {
+ io_state->offset = io_config->offset;
+ io_state->clear = io_config->clear;
+ io_state->set = io_config->set;
+ }
+
+ suspend_info->m4if_base = ioremap(soc_data->m4if_addr, SZ_16K);
+ if (!suspend_info->m4if_base) {
+ ret = -ENOMEM;
+ goto failed_map_m4if;
+ }
+
+ suspend_info->iomuxc_base = ioremap(soc_data->iomuxc_addr, SZ_16K);
+ if (!suspend_info->iomuxc_base) {
+ ret = -ENOMEM;
+ goto failed_map_iomuxc;
+ }
+
+ imx5_suspend_in_ocram_fn = fncpy(
+ suspend_ocram_base + sizeof(*suspend_info),
+ suspend_asm,
+ *soc_data->suspend_asm_sz);
+
+ return 0;
+
+failed_map_iomuxc:
+ iounmap(suspend_info->m4if_base);
+
+failed_map_m4if:
+ return ret;
+}
+
static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
{
int ret;
@@ -219,6 +417,11 @@ static int __init imx5_pm_common_init(const struct imx5_pm_data *data)
if (ret)
pr_warn("%s: cpuidle init failed %d\n", __func__, ret);
+ ret = imx5_suspend_init(data);
+ if (ret)
+ pr_warn("%s: No DDR LPM support with suspend %d!\n",
+ __func__, ret);
+
suspend_set_ops(&mx5_suspend_ops);
return 0;
diff --git a/arch/arm/mach-imx/suspend-imx53.S b/arch/arm/mach-imx/suspend-imx53.S
new file mode 100644
index 0000000..5ed078a
--- /dev/null
+++ b/arch/arm/mach-imx/suspend-imx53.S
@@ -0,0 +1,139 @@
+/*
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ */
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/linkage.h>
+
+#define M4IF_MCR0_OFFSET (0x008C)
+#define M4IF_MCR0_FDVFS (0x1 << 11)
+#define M4IF_MCR0_FDVACK (0x1 << 27)
+
+ .align 3
+
+/*
+ * ==================== low level suspend ====================
+ *
+ * On entry
+ * r0: pm_info structure address;
+ *
+ * suspend ocram space layout:
+ * ======================== high address ======================
+ * .
+ * .
+ * .
+ * ^
+ * ^
+ * ^
+ * imx53_suspend code
+ * PM_INFO structure(imx53_suspend_info)
+ * ======================== low address =======================
+ */
+
+/* Offsets of members of struct imx53_suspend_info */
+#define SUSPEND_INFO_MX53_M4IF_V_OFFSET 0x0
+#define SUSPEND_INFO_MX53_IOMUXC_V_OFFSET 0x4
+#define SUSPEND_INFO_MX53_IO_COUNT_OFFSET 0x8
+#define SUSPEND_INFO_MX53_IO_STATE_OFFSET 0xc
+
+ENTRY(imx53_suspend)
+ stmfd sp!, {r4,r5,r6,r7}
+
+ /* Save pad config */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
+ cmp r1, #0
+ beq skip_pad_conf_1
+
+ add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
+ ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
+
+1:
+ ldr r5, [r2], #12 /* IOMUXC register offset */
+ ldr r6, [r3, r5] /* current value */
+ str r6, [r2], #4 /* save area */
+ subs r1, r1, #1
+ bne 1b
+
+skip_pad_conf_1:
+ /* Set FDVFS bit of M4IF_MCR0 to request DDR to enter self-refresh */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET]
+ ldr r2,[r1, #M4IF_MCR0_OFFSET]
+ orr r2, r2, #M4IF_MCR0_FDVFS
+ str r2,[r1, #M4IF_MCR0_OFFSET]
+
+ /* Poll FDVACK bit of M4IF_MCR to wait for DDR to enter self-refresh */
+wait_sr_ack:
+ ldr r2,[r1, #M4IF_MCR0_OFFSET]
+ ands r2, r2, #M4IF_MCR0_FDVACK
+ beq wait_sr_ack
+
+ /* Set pad config */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
+ cmp r1, #0
+ beq skip_pad_conf_2
+
+ add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
+ ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
+
+2:
+ ldr r5, [r2], #4 /* IOMUXC register offset */
+ ldr r6, [r2], #4 /* clear */
+ ldr r7, [r3, r5]
+ bic r7, r7, r6
+ ldr r6, [r2], #8 /* set */
+ orr r7, r7, r6
+ str r7, [r3, r5]
+ subs r1, r1, #1
+ bne 2b
+
+skip_pad_conf_2:
+ /* Zzz, enter stop mode */
+ wfi
+ nop
+ nop
+ nop
+ nop
+
+ /* Restore pad config */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_IO_COUNT_OFFSET]
+ cmp r1, #0
+ beq skip_pad_conf_3
+
+ add r2, r0, #SUSPEND_INFO_MX53_IO_STATE_OFFSET
+ ldr r3, [r0, #SUSPEND_INFO_MX53_IOMUXC_V_OFFSET]
+
+3:
+ ldr r5, [r2], #12 /* IOMUXC register offset */
+ ldr r6, [r2], #4 /* saved value */
+ str r6, [r3, r5]
+ subs r1, r1, #1
+ bne 3b
+
+skip_pad_conf_3:
+ /* Clear FDVFS bit of M4IF_MCR0 to request DDR to exit self-refresh */
+ ldr r1, [r0, #SUSPEND_INFO_MX53_M4IF_V_OFFSET]
+ ldr r2,[r1, #M4IF_MCR0_OFFSET]
+ bic r2, r2, #M4IF_MCR0_FDVFS
+ str r2,[r1, #M4IF_MCR0_OFFSET]
+
+ /* Poll FDVACK bit of M4IF_MCR to wait for DDR to exit self-refresh */
+wait_ar_ack:
+ ldr r2,[r1, #M4IF_MCR0_OFFSET]
+ ands r2, r2, #M4IF_MCR0_FDVACK
+ bne wait_ar_ack
+
+ /* Restore registers */
+ ldmfd sp!, {r4,r5,r6,r7}
+ mov pc, lr
+
+ENDPROC(imx53_suspend)
+
+ENTRY(imx53_suspend_sz)
+ .word . - imx53_suspend
More information about the linux-arm-kernel
mailing list