[PATCH] gpio: omap: Fix regression for MPUIO interrupts
Tony Lindgren
tony at atomide.com
Thu Apr 23 16:54:17 PDT 2015
At some point with all the GPIO clean-up we've broken the
MPUIO interrupts. Those are just a little bit different from
the GPIO interrupts, so we can fix it up just by setting
different irqchip functions for it. And then we can just
remove all old code trying to do the same.
Cc: Aaro Koskinen <aaro.koskinen at iki.fi>
Cc: Felipe Balbi <balbi at ti.com>
Cc: Javier Martinez Canillas <javier at dowhile0.org>
Cc: Grygorii Strashko <grygorii.strashko at linaro.org>
Cc: Kevin Hilman <khilman at deeprootsystems.com>
Cc: Nishanth Menon <nm at ti.com>
Cc: Santosh Shilimkar <ssantosh at kernel.org>
Signed-off-by: Tony Lindgren <tony at atomide.com>
---
drivers/gpio/gpio-omap.c | 48 +++++++++---------------------------------------
1 file changed, 9 insertions(+), 39 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 6553361..b59c3ca 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1023,38 +1023,8 @@ static void omap_gpio_mod_init(struct gpio_bank *bank)
dev_err(bank->dev, "Could not get gpio dbck\n");
}
-static void
-omap_mpuio_alloc_gc(struct gpio_bank *bank, unsigned int irq_start,
- unsigned int num)
-{
- struct irq_chip_generic *gc;
- struct irq_chip_type *ct;
-
- gc = irq_alloc_generic_chip("MPUIO", 1, irq_start, bank->base,
- handle_simple_irq);
- if (!gc) {
- dev_err(bank->dev, "Memory alloc failed for gc\n");
- return;
- }
-
- ct = gc->chip_types;
-
- /* NOTE: No ack required, reading IRQ status clears it. */
- ct->chip.irq_mask = irq_gc_mask_set_bit;
- ct->chip.irq_unmask = irq_gc_mask_clr_bit;
- ct->chip.irq_set_type = omap_gpio_irq_type;
-
- if (bank->regs->wkup_en)
- ct->chip.irq_set_wake = omap_gpio_wake_enable;
-
- ct->regs.mask = OMAP_MPUIO_GPIO_INT / bank->stride;
- irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
- IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-}
-
static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
{
- int j;
static int gpio;
int irq_base = 0;
int ret;
@@ -1101,6 +1071,15 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
}
#endif
+ /* MPUIO is a bit different, reading IRQ status clears it */
+ if (bank->is_mpuio) {
+ irqc->irq_ack = dummy_irq_chip.irq_ack;
+ irqc->irq_mask = irq_gc_mask_set_bit;
+ irqc->irq_unmask = irq_gc_mask_clr_bit;
+ if (!bank->regs->wkup_en)
+ irqc->irq_set_wake = NULL;
+ }
+
ret = gpiochip_irqchip_add(&bank->chip, irqc,
irq_base, omap_gpio_irq_handler,
IRQ_TYPE_NONE);
@@ -1114,15 +1093,6 @@ static int omap_gpio_chip_init(struct gpio_bank *bank, struct irq_chip *irqc)
gpiochip_set_chained_irqchip(&bank->chip, irqc,
bank->irq, omap_gpio_irq_handler);
- for (j = 0; j < bank->width; j++) {
- int irq = irq_find_mapping(bank->chip.irqdomain, j);
- if (bank->is_mpuio) {
- omap_mpuio_alloc_gc(bank, irq, bank->width);
- irq_set_chip_and_handler(irq, NULL, NULL);
- set_irq_flags(irq, 0);
- }
- }
-
return 0;
}
--
2.1.4
More information about the linux-arm-kernel
mailing list