[PATCH v2 9/9] ARM: BCM63xx: Add SMP support for BCM63138
Florian Fainelli
f.fainelli at gmail.com
Thu Apr 23 16:10:02 PDT 2015
Add support for booting the secondary CPU on BCM63138, this involves:
- locating the bootlut to write the reset vector
- powering up the second CPU when we need to using the DT-supplied PMB
references
- disabling VFP when enabled such that we can keep having SMP
Signed-off-by: Florian Fainelli <f.fainelli at gmail.com>
---
arch/arm/mach-bcm/Makefile | 7 +-
arch/arm/mach-bcm/bcm63xx_headsmp.S | 23 +++++
arch/arm/mach-bcm/bcm63xx_smp.c | 170 ++++++++++++++++++++++++++++++++++++
arch/arm/mach-bcm/bcm63xx_smp.h | 9 ++
4 files changed, 208 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-bcm/bcm63xx_headsmp.S
create mode 100644 arch/arm/mach-bcm/bcm63xx_smp.c
create mode 100644 arch/arm/mach-bcm/bcm63xx_smp.h
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index 4c38674c73ec..55d3a1213876 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -38,7 +38,12 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2835.o
obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
# BCM63XXx
-obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o
+ifeq ($(CONFIG_ARCH_BCM_63XX),y)
+CFLAGS_bcm63xx_headsmp.o += -march=armv7-a
+obj-y += bcm63xx.o
+obj-$(CONFIG_SMP) += bcm63xx_smp.o bcm63xx_headsmp.o \
+ bcm63xx_pmb.o
+endif
ifeq ($(CONFIG_ARCH_BRCMSTB),y)
CFLAGS_platsmp-brcmstb.o += -march=armv7-a
diff --git a/arch/arm/mach-bcm/bcm63xx_headsmp.S b/arch/arm/mach-bcm/bcm63xx_headsmp.S
new file mode 100644
index 000000000000..c7af397c7f14
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm63xx_headsmp.S
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2015, Broadcom Corporation
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+ENTRY(bcm63138_secondary_startup)
+ ARM_BE8(setend be)
+ /*
+ * L1 cache does have unpredictable contents at power-up clean its
+ * contents without flushing
+ */
+ bl v7_invalidate_l1
+ nop
+
+ b secondary_startup
+ENDPROC(bcm63138_secondary_startup)
diff --git a/arch/arm/mach-bcm/bcm63xx_smp.c b/arch/arm/mach-bcm/bcm63xx_smp.c
new file mode 100644
index 000000000000..07ddc04c96ce
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm63xx_smp.c
@@ -0,0 +1,170 @@
+/*
+ * Broadcom BCM63138 DSL SoCs SMP support code
+ *
+ * Copyright (C) 2015, Broadcom Corporation
+ *
+ * Licensed under the terms of the GPLv2
+ */
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/bcm63xx_pmb.h>
+
+#include <asm/cacheflush.h>
+#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/vfp.h>
+
+#include "bcm63xx_smp.h"
+
+/* Size of mapped Cortex A9 SCU address space */
+#define CORTEX_A9_SCU_SIZE 0x58
+
+/*
+ * Enable the Cortex A9 Snoop Control Unit
+ *
+ * By the time this is called we already know there are multiple
+ * cores present. We assume we're running on a Cortex A9 processor,
+ * so any trouble getting the base address register or getting the
+ * SCU base is a problem.
+ *
+ * Return 0 if successful or an error code otherwise.
+ */
+static int __init scu_a9_enable(void)
+{
+ unsigned long config_base;
+ void __iomem *scu_base;
+ unsigned int i, ncores;
+
+ if (!scu_a9_has_base()) {
+ pr_err("no configuration base address register!\n");
+ return -ENXIO;
+ }
+
+ /* Config base address register value is zero for uniprocessor */
+ config_base = scu_a9_get_base();
+ if (!config_base) {
+ pr_err("hardware reports only one core\n");
+ return -ENOENT;
+ }
+
+ scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
+ if (!scu_base) {
+ pr_err("failed to remap config base (%lu/%u) for SCU\n",
+ config_base, CORTEX_A9_SCU_SIZE);
+ return -ENOMEM;
+ }
+
+ scu_enable(scu_base);
+
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
+ /* The BCM63138 SoC has two Cortex-A9 CPUs, CPU0 features a complete
+ * and fully functional VFP unit that can be used, but CPU1 does not.
+ * Since we will not be able to trap kernel-mode NEON to force
+ * migration to CPU0, just do not advertise VFP support at all.
+ *
+ * This will make vfp_init bail out and do not attempt to use VFP at
+ * all, for kernel-mode NEON, we do not want to introduce any
+ * conditionals in hot-paths, so we just restrict the system to UP.
+ */
+#ifdef CONFIG_VFP
+ if (ncores > 1) {
+ pr_warn("SMP: secondary CPUs lack VFP unit, disabling VFP\n");
+ vfp_disable();
+
+#ifdef CONFIG_KERNEL_MODE_NEON
+ WARN(1, "SMP: kernel-mode NEON enabled, restricting to UP\n");
+ ncores = 1;
+#endif
+ }
+#endif
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+
+ iounmap(scu_base); /* That's the last we'll need of this */
+
+ return 0;
+}
+
+static const struct of_device_id bcm63138_bootlut_ids[] = {
+ { .compatible = "brcm,bcm63138-bootlut", },
+ { /* sentinel */ },
+};
+
+#define BOOTLUT_RESET_VECT 0x20
+
+static int bcm63138_smp_boot_secondary(unsigned int cpu,
+ struct task_struct *idle)
+{
+ void __iomem *bootlut_base;
+ struct device_node *dn;
+ int ret = 0;
+ u32 val;
+
+ dn = of_find_matching_node(NULL, bcm63138_bootlut_ids);
+ if (!dn) {
+ pr_err("SMP: unable to find bcm63138 boot LUT node\n");
+ return -ENODEV;
+ }
+
+ bootlut_base = of_iomap(dn, 0);
+ of_node_put(dn);
+
+ if (!bootlut_base) {
+ pr_err("SMP: unable to remap boot LUT base register\n");
+ return -ENOMEM;
+ }
+
+ /* Locate the secondary CPU node */
+ dn = of_get_cpu_node(cpu_logical_map(cpu), NULL);
+ if (!dn) {
+ pr_err("SMP: failed to locate secondary CPU%d node\n", cpu);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ /* Write the secondary init routine to the BootLUT reset vector */
+ val = virt_to_phys(bcm63138_secondary_startup);
+ writel_relaxed(val, bootlut_base + BOOTLUT_RESET_VECT);
+
+ /* Power up the core, will jump straight to its reset vector when we
+ * return
+ */
+ ret = bcm63xx_pmb_power_on_cpu(dn);
+ if (ret)
+ goto out;
+out:
+ iounmap(bootlut_base);
+
+ return ret;
+}
+
+static void __init bcm63138_smp_prepare_cpus(unsigned int max_cpus)
+{
+ int ret;
+
+ ret = scu_a9_enable();
+ if (ret) {
+ pr_warn("SMP: Cortex-A9 SCU setup failed\n");
+ return;
+ }
+}
+
+struct smp_operations bcm63138_smp_ops __initdata = {
+ .smp_prepare_cpus = bcm63138_smp_prepare_cpus,
+ .smp_boot_secondary = bcm63138_smp_boot_secondary,
+};
+
+CPU_METHOD_OF_DECLARE(bcm63138_smp, "brcm,bcm63138", &bcm63138_smp_ops);
diff --git a/arch/arm/mach-bcm/bcm63xx_smp.h b/arch/arm/mach-bcm/bcm63xx_smp.h
new file mode 100644
index 000000000000..50b76044536e
--- /dev/null
+++ b/arch/arm/mach-bcm/bcm63xx_smp.h
@@ -0,0 +1,9 @@
+#ifndef __BCM63XX_SMP_H
+#define __BCM63XX_SMP_H
+
+struct device_node;
+
+extern void bcm63138_secondary_startup(void);
+extern int bcm63xx_pmb_power_on_cpu(struct device_node *dn);
+
+#endif /* __BCM63XX_SMP_H */
--
2.1.0
More information about the linux-arm-kernel
mailing list