[PATCH v2 3/3] PCI: Layerscape: Add Layerscape PCIe driver

[Lian Minghuan-B31939]

Hi Arnd,

On 2014年09月16日 16:33, Arnd Bergmann wrote:
> On Tuesday 16 September 2014, Lian Minghuan-B31939 wrote:
>>>>>> +          ranges = <0x81000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00010000   /* downstream I/O */
>>>>>> +                    0x82000000 0x0 0x00000000 0x41 0x00000000 0x1 0x00000000>; /* non-prefetchable memory */
>>>>> Are these ranges hardcoded in the SoC, or are they the result of iATU
>>>>> settings?  If the latter, who configures it and why no prefetchable
>>>>> region?
>>>> [Minghuan] 400000_0000 - 480000_0000 is hardcode assigned to PEX1.
>>>> I separates from this 32 region  1M for IO, 4G for non-prefetchable memory.
>>>> 4G is the max size iATU supported.
>>>> IO and memory region will be set to iATU by pci-designware.c
>>>> Because both powerpc and imx do not set prefechable memory,
>>>> so  I do not assign prefetchable memory either.
>>> If there's spare room in the addres space for a prefetchable region, why
>>> not make one, regardless of what PPC and IMX do?
>>>
>>> FWIW, I believe that ARMv8 can make better use of a prefetchable region
>>> due to the "gathering" storage attribute, so even if you don't use one
>>> on LS1021A consider using one on ARMv8-based LS chips.
>> [Minghuan] Ok, I will add 4G prefetchable memory region.
> I guess that means you still can't support devices that require 64-bit
> BARs, right? 4GB may be too small for some devices.
>
> Do I read this right that you could have multiple adjacent 4GB areas
> but are limited on registers to set up these areas?
[Minghuan] Yes, an iATU supports up to 4GB in size. We can create 
multiple iATU
to cover a region larger than 4G.
> 	Arnd