[PATCH v2 3/3] PCI: Layerscape: Add Layerscape PCIe driver

[Arnd Bergmann]

On Tuesday 16 September 2014, Lian Minghuan-B31939 wrote:
> >>>> +          ranges = <0x81000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00010000   /* downstream I/O */
> >>>> +                    0x82000000 0x0 0x00000000 0x41 0x00000000 0x1 0x00000000>; /* non-prefetchable memory */
> >>> Are these ranges hardcoded in the SoC, or are they the result of iATU
> >>> settings?  If the latter, who configures it and why no prefetchable
> >>> region?
> >> [Minghuan] 400000_0000 - 480000_0000 is hardcode assigned to PEX1.
> >> I separates from this 32 region  1M for IO, 4G for non-prefetchable memory.
> >> 4G is the max size iATU supported.
> >> IO and memory region will be set to iATU by pci-designware.c
> >> Because both powerpc and imx do not set prefechable memory,
> >> so  I do not assign prefetchable memory either.
> > If there's spare room in the addres space for a prefetchable region, why
> > not make one, regardless of what PPC and IMX do?
> >
> > FWIW, I believe that ARMv8 can make better use of a prefetchable region
> > due to the "gathering" storage attribute, so even if you don't use one
> > on LS1021A consider using one on ARMv8-based LS chips.
> [Minghuan] Ok, I will add 4G prefetchable memory region.

I guess that means you still can't support devices that require 64-bit
BARs, right? 4GB may be too small for some devices.

Do I read this right that you could have multiple adjacent 4GB areas
but are limited on registers to set up these areas?

	Arnd