[PATCH v2] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188

Heiko Stübner heiko at sntech.de
Wed Oct 15 07:07:55 PDT 2014


Hi Julien,

Am Dienstag, 14. Oktober 2014, 10:16:37 schrieb Julien CHAUVEAU:
> Add the I2S/PCM controller nodes and pin controls for rk3066 and rk3188.
> 
> Signed-off-by: Julien CHAUVEAU <julien.chauveau at neo-technologies.fr>

I've added the patch to my wip dts branch on github - which will move to 
kernel.org after -rc1

> ---

In the future for v2 and onwards patches, please provide a changelog in the 
comment section (after the "---"), so people can see what changed, like:

changes since v1:
- declare i2s nodes separately on rk3066 and rk3188 as the controllers differ

This doesn't get into the kernel itself, but is helpful for people reviewing 
the patch.

>  arch/arm/boot/dts/rk3066a.dtsi | 81
> ++++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/rk3188.dtsi  |
> 26 ++++++++++++++
>  2 files changed, 107 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
> index ad9c2db..d75b01a 100644
> --- a/arch/arm/boot/dts/rk3066a.dtsi
> +++ b/arch/arm/boot/dts/rk3066a.dtsi
> @@ -53,6 +53,51 @@
>  		};
>  	};
> 
> +	i2s0: i2s at 10118000 {
> +		compatible = "rockchip,rk3066-i2s";
> +		reg = <0x10118000 0x2000>;
> +		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&i2s0_bus>;
> +		dmas = <&dmac1_s 4>, <&dmac1_s 5>;
> +		dma-names = "tx", "rx";
> +		clock-names = "i2s_hclk", "i2s_clk";
> +		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
> +		status = "disabled";
> +	};
> +
> +	i2s1: i2s at 1011a000 {
> +		compatible = "rockchip,rk3066-i2s";
> +		reg = <0x1011a000 0x2000>;
> +		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&i2s1_bus>;
> +		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
> +		dma-names = "tx", "rx";
> +		clock-names = "i2s_hclk", "i2s_clk";
> +		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
> +		status = "disabled";
> +	};
> +
> +	i2s2: i2s at 1011c000 {
> +		compatible = "rockchip,rk3066-i2s";
> +		reg = <0x1011c000 0x2000>;
> +		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&i2s2_bus>;
> +		dmas = <&dmac1_s 9>, <&dmac1_s 10>;
> +		dma-names = "tx", "rx";
> +		clock-names = "i2s_hclk", "i2s_clk";
> +		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
> +		status = "disabled";
> +	};
> +
>  	cru: clock-controller at 20000000 {
>  		compatible = "rockchip,rk3066a-cru";
>  		reg = <0x20000000 0x1000>;
> @@ -405,6 +450,42 @@
>  						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
>  			};
>  		};
> +
> +		i2s0 {
> +			i2s0_bus: i2s0-bus {
> +				rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
> +			};
> +		};
> +
> +		i2s1 {
> +			i2s1_bus: i2s1-bus {
> +				rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
> +			};
> +		};
> +
> +		i2s2 {
> +			i2s2_bus: i2s2-bus {
> +				rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
> +						<RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
> +			};
> +		};
>  	};
>  };
> 
> diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
> index ddaada7..fa3665a 100644
> --- a/arch/arm/boot/dts/rk3188.dtsi
> +++ b/arch/arm/boot/dts/rk3188.dtsi
> @@ -65,6 +65,21 @@
>  		};
>  	};
> 
> +	i2s0: i2s at 1011a000 {
> +		compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
> +		reg = <0x1011a000 0x2000>;
> +		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&i2s0_bus>;
> +		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
> +		dma-names = "tx", "rx";
> +		clock-names = "i2s_hclk", "i2s_clk";
> +		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
> +		status = "disabled";
> +	};
> +
>  	cru: clock-controller at 20000000 {
>  		compatible = "rockchip,rk3188-cru";
>  		reg = <0x20000000 0x1000>;
> @@ -395,6 +410,17 @@
>  						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
>  			};
>  		};
> +
> +		i2s0 {
> +			i2s0_bus: i2s0-bus {
> +				rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>,
> +						<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
> +			};
> +		};
>  	};
>  };



More information about the linux-arm-kernel mailing list