[PATCH v2] ARM: dts: rockchip: add I2S controllers for rk3066 and rk3188

Julien CHAUVEAU julien.chauveau at neo-technologies.fr
Tue Oct 14 01:16:37 PDT 2014


Add the I2S/PCM controller nodes and pin controls for rk3066 and rk3188.

Signed-off-by: Julien CHAUVEAU <julien.chauveau at neo-technologies.fr>
---
 arch/arm/boot/dts/rk3066a.dtsi | 81 ++++++++++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/rk3188.dtsi  | 26 ++++++++++++++
 2 files changed, 107 insertions(+)

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index ad9c2db..d75b01a 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -53,6 +53,51 @@
 		};
 	};
 
+	i2s0: i2s at 10118000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x10118000 0x2000>;
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		dmas = <&dmac1_s 4>, <&dmac1_s 5>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		status = "disabled";
+	};
+
+	i2s1: i2s at 1011a000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x1011a000 0x2000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s1_bus>;
+		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+		status = "disabled";
+	};
+
+	i2s2: i2s at 1011c000 {
+		compatible = "rockchip,rk3066-i2s";
+		reg = <0x1011c000 0x2000>;
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s2_bus>;
+		dmas = <&dmac1_s 9>, <&dmac1_s 10>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+		status = "disabled";
+	};
+
 	cru: clock-controller at 20000000 {
 		compatible = "rockchip,rk3066a-cru";
 		reg = <0x20000000 0x1000>;
@@ -405,6 +450,42 @@
 						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
 			};
 		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s1 {
+			i2s1_bus: i2s1-bus {
+				rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
+
+		i2s2 {
+			i2s2_bus: i2s2-bus {
+				rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
+						<RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
+			};
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index ddaada7..fa3665a 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -65,6 +65,21 @@
 		};
 	};
 
+	i2s0: i2s at 1011a000 {
+		compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
+		reg = <0x1011a000 0x2000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_bus>;
+		dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+		dma-names = "tx", "rx";
+		clock-names = "i2s_hclk", "i2s_clk";
+		clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+		status = "disabled";
+	};
+
 	cru: clock-controller at 20000000 {
 		compatible = "rockchip,rk3188-cru";
 		reg = <0x20000000 0x1000>;
@@ -395,6 +410,17 @@
 						<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
 			};
 		};
+
+		i2s0 {
+			i2s0_bus: i2s0-bus {
+				rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>,
+						<RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
 	};
 };
 
-- 
1.9.1




More information about the linux-arm-kernel mailing list