[PATCH 09/34] ARM: shmobile: r8a7790: switch from scif to scifa

[Simon Horman]

From: Wolfram Sang <wsa+renesas at sang-engineering.com>

SCIF and SCIFA can be plexed onto the same wires on Lager board. The
datasheet also describes the wires as SCIFA. So, to make use of the
bigger FIFOs switch to SCIFA instead.

Signed-off-by: Wolfram Sang <wsa+renesas at sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index cd530de..e96f952 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -19,8 +19,8 @@
 	compatible = "renesas,lager", "renesas,r8a7790";
 
 	aliases {
-		serial6 = &scif0;
-		serial7 = &scif1;
+		serial6 = &scifa0;
+		serial7 = &scifa1;
 	};
 
 	chosen {
@@ -207,9 +207,9 @@
 		renesas,function = "du";
 	};
 
-	scif0_pins: serial0 {
-		renesas,groups = "scif0_data";
-		renesas,function = "scif0";
+	scifa0_pins: serial0 {
+		renesas,groups = "scifa0_data";
+		renesas,function = "scifa0";
 	};
 
 	ether_pins: ether {
@@ -222,9 +222,9 @@
 		renesas,function = "intc";
 	};
 
-	scif1_pins: serial1 {
-		renesas,groups = "scif1_data";
-		renesas,function = "scif1";
+	scifa1_pins: serial1 {
+		renesas,groups = "scifa1_data";
+		renesas,function = "scifa1";
 	};
 
 	sdhi0_pins: sd0 {
@@ -356,15 +356,15 @@
 	};
 };
 
-&scif0 {
-	pinctrl-0 = <&scif0_pins>;
+&scifa0 {
+	pinctrl-0 = <&scifa0_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
 };
 
-&scif1 {
-	pinctrl-0 = <&scif1_pins>;
+&scifa1 {
+	pinctrl-0 = <&scifa1_pins>;
 	pinctrl-names = "default";
 
 	status = "okay";
-- 
2.1.1