[PATCH 08/34] ARM: shmobile: r8a7791: link PCI USB devices to USB PHY

[Simon Horman]

From: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>

Describe the PCI USB devices that are behind the PCI bridges, adding necessary
links to the USB PHY device.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov at cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas at verge.net.au>
---
 arch/arm/boot/dts/r8a7791.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 49f6b99..1c58ce0 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -1194,6 +1194,20 @@
 		interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
 				 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
 				 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb at 0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
+
+		usb at 0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb0 0>;
+			phy-names = "usb";
+		};
 	};
 
 	pci1: pci at ee0d0000 {
@@ -1214,6 +1228,20 @@
 		interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
 				 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
 				 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+		usb at 0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
+
+		usb at 0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usb2 0>;
+			phy-names = "usb";
+		};
 	};
 
 	pciec: pcie at fe000000 {
-- 
2.1.1