[PATCH 2/2] ARM: dts: mvebu: split SolidRun CuBox into variants

Jason Cooper jason at lakedaemon.net
Tue May 27 09:11:44 PDT 2014


On Mon, May 26, 2014 at 11:33:29PM +0200, Sebastian Hesselbarth wrote:
> As Mainlining effort for SolidRun CuBox has been carried out on the
> Engineering Sample, the board DTS was reflecting this. Actually,
> SolidRun CuBox comes in three different variants: Engineering Sample (ES),
> production with 1GB RAM (1G), and production with 2GB RAM (2G).
> 
> Therefore, we split the current dove-cubox.dts into a common board include
> and one board dts for each of the above variants.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
> ---
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Pawel Moll <pawel.moll at arm.com>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
> Cc: Kumar Gala <galak at codeaurora.org>
> Cc: Russell King <linux at arm.linux.org.uk>
> Cc: Jason Cooper <jason at lakedaemon.net>
> Cc: Andrew Lunn <andrew at lunn.ch>
> Cc: Gregory Clement <gregory.clement at free-electrons.com>
> Cc: devicetree at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-kernel at vger.kernel.org
> ---
>  arch/arm/boot/dts/Makefile                         |  4 +++-
>  arch/arm/boot/dts/dove-cubox-1g.dts                | 17 ++++++++++++++++
>  arch/arm/boot/dts/dove-cubox-2g.dts                | 17 ++++++++++++++++
>  arch/arm/boot/dts/dove-cubox-es.dts                | 23 ++++++++++++++++++++++
>  .../boot/dts/{dove-cubox.dts => dove-cubox.dtsi}   | 17 ----------------
>  5 files changed, 60 insertions(+), 18 deletions(-)
>  create mode 100644 arch/arm/boot/dts/dove-cubox-1g.dts
>  create mode 100644 arch/arm/boot/dts/dove-cubox-2g.dts
>  create mode 100644 arch/arm/boot/dts/dove-cubox-es.dts
>  rename arch/arm/boot/dts/{dove-cubox.dts => dove-cubox.dtsi} (86%)
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 35c146f31e46..40a008539c0c 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -404,7 +404,9 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
>  	armada-xp-matrix.dtb \
>  	armada-xp-openblocks-ax3-4.dtb
>  dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
> -	dove-cubox.dtb \
> +	dove-cubox-1g.dtb \
> +	dove-cubox-2g.dtb \
> +	dove-cubox-es.dtb \
>  	dove-d2plug.dtb \
>  	dove-d3plug.dtb \
>  	dove-dove-db.dtb
> diff --git a/arch/arm/boot/dts/dove-cubox-1g.dts b/arch/arm/boot/dts/dove-cubox-1g.dts
> new file mode 100644
> index 000000000000..eebd3f7ca7e6
> --- /dev/null
> +++ b/arch/arm/boot/dts/dove-cubox-1g.dts
> @@ -0,0 +1,17 @@
> +/dts-v1/;
> +
> +#include "dove-cubox.dtsi"
> +
> +/ {
> +	model = "SolidRun CuBox (1G)";
> +	compatible = "solidrun,cubox-1g", "solidrun,cubox", "marvell,dove";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x40000000>;
> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200n8 earlyprintk";
> +	};
> +};
> diff --git a/arch/arm/boot/dts/dove-cubox-2g.dts b/arch/arm/boot/dts/dove-cubox-2g.dts
> new file mode 100644
> index 000000000000..513b6a68eba3
> --- /dev/null
> +++ b/arch/arm/boot/dts/dove-cubox-2g.dts
> @@ -0,0 +1,17 @@
> +/dts-v1/;
> +
> +#include "dove-cubox.dtsi"
> +
> +/ {
> +	model = "SolidRun CuBox (2G)";
> +	compatible = "solidrun,cubox-2g", "solidrun,cubox", "marvell,dove";
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x80000000>;

Do you anticipate any other differences between the 1G and the 2G?
Otherwise, I'm inclined to just have a "solidrun,cubox".  The bootloader
should be setting the amount of RAM at boottime anyway.

> +	};
> +
> +	chosen {
> +		bootargs = "console=ttyS0,115200n8 earlyprintk";
> +	};
> +};
> diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts
> new file mode 100644
> index 000000000000..5fc17ce34c98
> --- /dev/null
> +++ b/arch/arm/boot/dts/dove-cubox-es.dts
> @@ -0,0 +1,23 @@
> +/dts-v1/;
> +
> +#include "dove-cubox.dtsi"
> +
> +/ {
> +	model = "SolidRun CuBox (ES)";

"Engineering Sample" ?

thx,

Jason.



More information about the linux-arm-kernel mailing list