[PATCH 2/2] ARM: dts: mvebu: split SolidRun CuBox into variants
Sebastian Hesselbarth
sebastian.hesselbarth at gmail.com
Mon May 26 14:33:29 PDT 2014
As Mainlining effort for SolidRun CuBox has been carried out on the
Engineering Sample, the board DTS was reflecting this. Actually,
SolidRun CuBox comes in three different variants: Engineering Sample (ES),
production with 1GB RAM (1G), and production with 2GB RAM (2G).
Therefore, we split the current dove-cubox.dts into a common board include
and one board dts for each of the above variants.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth at gmail.com>
---
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Pawel Moll <pawel.moll at arm.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Ian Campbell <ijc+devicetree at hellion.org.uk>
Cc: Kumar Gala <galak at codeaurora.org>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: Jason Cooper <jason at lakedaemon.net>
Cc: Andrew Lunn <andrew at lunn.ch>
Cc: Gregory Clement <gregory.clement at free-electrons.com>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---
arch/arm/boot/dts/Makefile | 4 +++-
arch/arm/boot/dts/dove-cubox-1g.dts | 17 ++++++++++++++++
arch/arm/boot/dts/dove-cubox-2g.dts | 17 ++++++++++++++++
arch/arm/boot/dts/dove-cubox-es.dts | 23 ++++++++++++++++++++++
.../boot/dts/{dove-cubox.dts => dove-cubox.dtsi} | 17 ----------------
5 files changed, 60 insertions(+), 18 deletions(-)
create mode 100644 arch/arm/boot/dts/dove-cubox-1g.dts
create mode 100644 arch/arm/boot/dts/dove-cubox-2g.dts
create mode 100644 arch/arm/boot/dts/dove-cubox-es.dts
rename arch/arm/boot/dts/{dove-cubox.dts => dove-cubox.dtsi} (86%)
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35c146f31e46..40a008539c0c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -404,7 +404,9 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-matrix.dtb \
armada-xp-openblocks-ax3-4.dtb
dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
- dove-cubox.dtb \
+ dove-cubox-1g.dtb \
+ dove-cubox-2g.dtb \
+ dove-cubox-es.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
dove-dove-db.dtb
diff --git a/arch/arm/boot/dts/dove-cubox-1g.dts b/arch/arm/boot/dts/dove-cubox-1g.dts
new file mode 100644
index 000000000000..eebd3f7ca7e6
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox-1g.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+
+#include "dove-cubox.dtsi"
+
+/ {
+ model = "SolidRun CuBox (1G)";
+ compatible = "solidrun,cubox-1g", "solidrun,cubox", "marvell,dove";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+};
diff --git a/arch/arm/boot/dts/dove-cubox-2g.dts b/arch/arm/boot/dts/dove-cubox-2g.dts
new file mode 100644
index 000000000000..513b6a68eba3
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox-2g.dts
@@ -0,0 +1,17 @@
+/dts-v1/;
+
+#include "dove-cubox.dtsi"
+
+/ {
+ model = "SolidRun CuBox (2G)";
+ compatible = "solidrun,cubox-2g", "solidrun,cubox", "marvell,dove";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+};
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts
new file mode 100644
index 000000000000..5fc17ce34c98
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox-es.dts
@@ -0,0 +1,23 @@
+/dts-v1/;
+
+#include "dove-cubox.dtsi"
+
+/ {
+ model = "SolidRun CuBox (ES)";
+ compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+};
+
+&sdio0 {
+ /* sdio0 card detect is connected to wrong pin on CuBox */
+ cd-gpios = <&gpio0 12 1>;
+ pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
+};
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dtsi
similarity index 86%
rename from arch/arm/boot/dts/dove-cubox.dts
rename to arch/arm/boot/dts/dove-cubox.dtsi
index 7a70f4ca502a..5752d729cc71 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dtsi
@@ -1,20 +1,6 @@
-/dts-v1/;
-
#include "dove.dtsi"
/ {
- model = "SolidRun CuBox";
- compatible = "solidrun,cubox", "marvell,dove";
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x40000000>;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- };
-
leds {
compatible = "gpio-leds";
pinctrl-0 = <&pmx_gpio_18>;
@@ -111,9 +97,6 @@
&sdio0 {
status = "okay";
- /* sdio0 card detect is connected to wrong pin on CuBox */
- cd-gpios = <&gpio0 12 1>;
- pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
};
&spi0 {
--
1.9.1
More information about the linux-arm-kernel
mailing list