[PATCH] ARM: dts: duovero-parlor: Add HDMI output

[Tony Lindgren]

* Florian Vaussard <florian.vaussard at epfl.ch> [140520 07:26]:
> @@ -77,6 +94,15 @@
>  			0x30 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a24.gpio_48: amdix enabled */
>  		>;
>  	};
> +
> +	dss_hdmi_pins: pinmux_dss_hdmi_pins {
> +		pinctrl-single,pins = <
> +			0x58 (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_hpd.hdmi_hpd */
> +			0x5a (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_cec.hdmi_cec */
> +			0x5c (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_scl.hdmi_ddc_scl */
> +			0x5e (PIN_INPUT_PULLUP | MUX_MODE0)	/* hdmi_ddc_sda.hdmi_ddc_sda */
> +		>;
> +	};
>  };
>  
>  &i2c2 {

This seems to apply with fuzz against omap-for-v3.16/dt-v2, but
should be updated against omap-for-v3.16/dt-v2 to use OMAP4_IOPAD
as omap4-duovero-parlor.dts is now using it. That makes checking
the muxing easier against the TRM. See commit 5efa994b0d49 for
the script Joachim used.

Regards,

Tony