[PATCH v2 5/6] ARM: berlin: add the AHCI node for the BG2Q

[Antoine Ténart]

The BG2Q has an AHCI SATA controller. Add the corresponding nodes
(AHCI, SATA PHY) in its device tree.

Signed-off-by: Antoine Ténart <antoine.tenart at free-electrons.com>
---
 arch/arm/boot/dts/berlin2q.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 07452a7483fa..99338a2d11a6 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -183,6 +183,20 @@
 			};
 		};
 
+		ahci: sata at e90000 {
+			compatible = "marvell,berlin-ahci";
+			reg = <0xe90000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sata_phy: phy at e900a0 {
+			compatible = "marvell,berlin-sata-phy";
+			reg = <0xe900a0 0x10>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		apb at fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
1.9.1