[PATCH v2 6/6] ARM: berlin: enable the eSATA interface on the BG2Q DMP

[Antoine Ténart]

The BG2Q has an AHCI SATA controller with an eSATA interface. Enable it.
Also use the SATA PHY 0, the BG2Q DMP does not has the SATA PHY 1.

Signed-off-by: Antoine Ténart <antoine.tenart at free-electrons.com>
---
 arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 2da9c41e29d8..3782204100d8 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -26,3 +26,13 @@
 &uart0 {
 	status = "okay";
 };
+
+&ahci {
+	phys = <&sata_phy 0>;
+	phy-names = "port0";
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
-- 
1.9.1