[PATCH 3/4] OMAPDSS: panel-sharp-ls037v7dw01: add device tree support
Tomi Valkeinen
tomi.valkeinen at ti.com
Fri May 9 01:31:10 PDT 2014
On 09/05/14 02:33, Tony Lindgren wrote:
> * Tony Lindgren <tony at atomide.com> [140507 11:00]:
>> * Tomi Valkeinen <tomi.valkeinen at ti.com> [140507 09:03]:
>>> On 07/05/14 18:03, Tony Lindgren wrote:
>>>>
>>>> BTW, I'm also personally fine with all five gpios showing in a single
>>>> gpios property, I'm not too exited about naming anything in DT..
>>>
>>> I don't have a strong opinion here. I don't have much experience with
>>> DT, especially with making bindings compatible with other ones.
>>>
>>> I'd just forget the simple-panel, and have single gpio array.
>>
>> Well if it's a don't care flag for both of us, let's try to use
>> the existing standard for simple-panel.txt and add mode-gpios
>> property. I'll post a patch for that.
>
> Here's an updated version using enable-gpios, reset-gpios and
> mode-gpios. So it follows simple-panel.txt and adds mode-gpios
> that's currently specific to this panel only.
>
> Also updated for -EPROBE_DEFER handling, tested that by changing
> one of the GPIOs to be a twl4030 GPIO.
To speed things up a bit, I made the changes I suggested. Compile tested
only.
From f8360778e8bc96096cbb1793a18a8c240376ca09 Mon Sep 17 00:00:00 2001
From: Tony Lindgren <tony at atomide.com>
Date: Mon, 28 Apr 2014 20:22:21 -0700
Subject: [PATCH] OMAPDSS: panel-sharp-ls037v7dw01: add device tree support
Add device tree support for sharp-ls037v7dw01 panel.
Signed-off-by: Tony Lindgren <tony at atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
.../bindings/video/sharp,ls037v7dw01.txt | 44 ++++++++++
.../omap2/displays-new/panel-sharp-ls037v7dw01.c | 95 +++++++++++++++++++++-
2 files changed, 136 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt
diff --git a/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt b/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt
new file mode 100644
index 000000000000..2a60fd9a2607
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/sharp,ls037v7dw01.txt
@@ -0,0 +1,44 @@
+SHARP LS037V7DW01 TFT-LCD panel
+===================================
+
+Required properties:
+- compatible: "sharp,ls037v7dw01"
+
+Optional properties:
+- label: a symbolic name for the panel
+- enable-gpios: a GPIO spec for the optional enable pin
+ this pin is the INI pin as specified in the LS037V7DW01.pdf file.
+- reset-gpios: a GPIO spec for the optional reset pin
+ this pin is the RESB pin as specified in the LS037V7DW01.pdf file.
+- mode-gpios: a GPIO
+ ordered MO, LR, and UD as specified in the LS037V7DW01.pdf file.
+
+Required nodes:
+- Video port for DPI input
+
+This panel can have zero to five GPIOs to configure
+to change configuration between QVGA and VGA mode
+and the scan direction. As these pins can be also
+configured with external pulls, all the GPIOs are
+considered optional with holes in the array.
+
+Example
+-------
+
+Example when connected to a omap2+ based device:
+
+lcd0: display {
+ compatible = "sharp,ls037v7dw01";
+ power-supply = <&lcd_3v3>;
+ enable-gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>; /* gpio152, lcd INI */
+ reset-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>; /* gpio155, lcd RESB */
+ mode-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH /* gpio154, lcd MO */
+ &gpio1 2 GPIO_ACTIVE_HIGH /* gpio2, lcd LR */
+ &gpio1 3 GPIO_ACTIVE_HIGH>; /* gpio3, lcd UD */
+
+ port {
+ lcd_in: endpoint {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+};
diff --git a/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
index 8adde628ad38..91eeb2ec93a8 100644
--- a/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
@@ -12,15 +12,18 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-
+#include <linux/regulator/consumer.h>
#include <video/omapdss.h>
#include <video/omap-panel-data.h>
struct panel_drv_data {
struct omap_dss_device dssdev;
struct omap_dss_device *in;
+ struct regulator *vcc;
int data_lines;
@@ -95,12 +98,21 @@ static int sharp_ls_enable(struct omap_dss_device *dssdev)
if (omapdss_device_is_enabled(dssdev))
return 0;
- in->ops.dpi->set_data_lines(in, ddata->data_lines);
+ if (ddata->data_lines)
+ in->ops.dpi->set_data_lines(in, ddata->data_lines);
in->ops.dpi->set_timings(in, &ddata->videomode);
+ if (ddata->vcc) {
+ r = regulator_enable(ddata->vcc);
+ if (r != 0)
+ return r;
+ }
+
r = in->ops.dpi->enable(in);
- if (r)
+ if (r) {
+ regulator_disable(ddata->vcc);
return r;
+ }
/* wait couple of vsyncs until enabling the LCD */
msleep(50);
@@ -136,6 +148,9 @@ static void sharp_ls_disable(struct omap_dss_device *dssdev)
in->ops.dpi->disable(in);
+ if (ddata->vcc)
+ regulator_disable(ddata->vcc);
+
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
}
@@ -243,6 +258,68 @@ static int sharp_ls_probe_pdata(struct platform_device *pdev)
return 0;
}
+static struct gpio_desc *
+sharp_ls_get_gpio_of(struct device *dev, int index, int val, char *desc)
+{
+ struct gpio_desc *gpio;
+
+ gpio = devm_gpiod_get_index(dev, desc, index);
+ if (IS_ERR(gpio))
+ return gpio;
+
+ gpiod_direction_output(gpio, val);
+
+ return gpio;
+}
+
+static int sharp_ls_probe_of(struct platform_device *pdev)
+{
+ struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+ struct device_node *node = pdev->dev.of_node;
+ struct omap_dss_device *in;
+
+ ddata->vcc = devm_regulator_get(&pdev->dev, "envdd");
+ if (IS_ERR(ddata->vcc)) {
+ dev_err(&pdev->dev, "failed to get regulator\n");
+ return PTR_ERR(ddata->vcc);
+ }
+
+ /* lcd INI */
+ ddata->ini_gpio = sharp_ls_get_gpio_of(&pdev->dev, 3, 0, "enable");
+ if (PTR_ERR(ddata->ini_gpio) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ /* lcd RESB */
+ ddata->resb_gpio = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset");
+ if (PTR_ERR(ddata->resb_gpio) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ /* lcd MO */
+ ddata->mo_gpio = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode");
+ if (PTR_ERR(ddata->mo_gpio) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ /* lcd LR */
+ ddata->lr_gpio = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode");
+ if (PTR_ERR(ddata->lr_gpio) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ /* lcd UD */
+ ddata->ud_gpio = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode");
+ if (PTR_ERR(ddata->ud_gpio) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ in = omapdss_of_find_source_for_first_ep(node);
+ if (IS_ERR(in)) {
+ dev_err(&pdev->dev, "failed to find video source\n");
+ return PTR_ERR(in);
+ }
+
+ ddata->in = in;
+
+ return 0;
+}
+
static int sharp_ls_probe(struct platform_device *pdev)
{
struct panel_drv_data *ddata;
@@ -259,6 +336,10 @@ static int sharp_ls_probe(struct platform_device *pdev)
r = sharp_ls_probe_pdata(pdev);
if (r)
return r;
+ } else if (pdev->dev.of_node) {
+ r = sharp_ls_probe_of(pdev);
+ if (r)
+ return r;
} else {
return -ENODEV;
}
@@ -302,12 +383,20 @@ static int __exit sharp_ls_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id sharp_ls_of_match[] = {
+ { .compatible = "omapdss,sharp,ls037v7dw01", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, sharp_ls_of_match);
+
static struct platform_driver sharp_ls_driver = {
.probe = sharp_ls_probe,
.remove = __exit_p(sharp_ls_remove),
.driver = {
.name = "panel-sharp-ls037v7dw01",
.owner = THIS_MODULE,
+ .of_match_table = sharp_ls_of_match,
},
};
--
1.9.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140509/b5256261/attachment-0001.sig>
More information about the linux-arm-kernel
mailing list